Hey there. With a Fujitsu U7512 notebook, running Debian sid with a kernel 6.5.10, I connect a TB4 port replicator (also from Fujitsu, model FPCPR401) using some TB4 cables (allegedly for 40 Gbps). The port replicator should have the most recent firmware (at least some Window binary from Fujitsu claims that). What I do is: I connect two Seagate Exos X20 20GB (ST20000NM007D) HDDs, via SATA-USB adapters from Inatec to the USB-C ports of the port replicator, mount a btrfs on top of dm-crypt on each, and copy over data from one to the other. The SATA-USB adapter is that one (https://www.amazon.com/gp/product/B0BCFMQRGR): 2023-11-08T17:24:22.409329+01:00 heisenberg kernel: [ 325.047599] usb 4-1.4.1: new SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:24:22.437055+01:00 heisenberg kernel: [ 325.076143] usb 4-1.4.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:24:22.437073+01:00 heisenberg kernel: [ 325.076160] usb 4-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:24:22.437075+01:00 heisenberg kernel: [ 325.076165] usb 4-1.4.1: Product: HDD Enclosure 2023-11-08T17:24:22.437075+01:00 heisenberg kernel: [ 325.076168] usb 4-1.4.1: Manufacturer: Inateck Technology Inc 2023-11-08T17:24:22.437076+01:00 heisenberg kernel: [ 325.076171] usb 4-1.4.1: SerialNumber: ABCDEFA74566 2023-11-08T17:24:22.437077+01:00 heisenberg kernel: [ 325.077023] usb 4-1.4.1: Device is not authorized for usage 2023-11-08T17:24:25.825070+01:00 heisenberg kernel: [ 328.463691] usb 4-1.4.1: authorized to connect 2023-11-08T17:24:25.841049+01:00 heisenberg kernel: [ 328.483079] scsi host0: uas 2023-11-08T17:24:25.841063+01:00 heisenberg kernel: [ 328.483159] usbcore: registered new interface driver uas Which allegedly supports SuperSpeed Plus 3.2 Gen 2, also use it with UBS/TB4 cables for up to 40Gbps (so the adapter has USB-C and USB-A connectors, I always used the USB-C ones). It apparently returns some bogus optimal IO sizes: 2023-11-08T17:24:25.905202+01:00 heisenberg kernel: [ 328.546568] scsi 0:0:0:0: Direct-Access ST20000N M007D-3DJ103 SN03 PQ: 0 ANSI: 6 2023-11-08T17:24:25.909092+01:00 heisenberg kernel: [ 328.551280] sd 0:0:0:0: [sda] 39063650304 512-byte logical blocks: (20.0 TB/18.2 TiB) 2023-11-08T17:24:25.909130+01:00 heisenberg kernel: [ 328.551294] sd 0:0:0:0: [sda] 4096-byte physical blocks 2023-11-08T17:24:25.913129+01:00 heisenberg kernel: [ 328.551537] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:24:25.913157+01:00 heisenberg kernel: [ 328.551543] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 2023-11-08T17:24:25.913158+01:00 heisenberg kernel: [ 328.551838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T17:24:25.913163+01:00 heisenberg kernel: [ 328.551998] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes 2023-11-08T17:24:25.913164+01:00 heisenberg kernel: [ 328.552003] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) 2023-11-08T17:24:25.953142+01:00 heisenberg kernel: [ 328.593525] sda: sda1 sda2 But the kernel set that to 0. In numerous tries, this always caused eventually (after 10 to 150 GBs having been copied) the following errors: 2023-11-08T17:30:08.185075+01:00 heisenberg kernel: [ 670.825988] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN 2023-11-08T17:30:08.185097+01:00 heisenberg kernel: [ 670.826005] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:30:08.185098+01:00 heisenberg kernel: [ 670.826218] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 2023-11-08T17:30:08.185099+01:00 heisenberg kernel: [ 670.826236] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:30:08.185100+01:00 heisenberg kernel: [ 670.826405] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2023-11-08T17:30:08.185102+01:00 heisenberg kernel: [ 670.826418] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:30:08.185103+01:00 heisenberg kernel: [ 670.826576] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN 2023-11-08T17:30:08.185104+01:00 heisenberg kernel: [ 670.826587] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:30:08.185104+01:00 heisenberg kernel: [ 670.826721] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN 2023-11-08T17:30:08.185105+01:00 heisenberg kernel: [ 670.826732] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:30:08.185106+01:00 heisenberg kernel: [ 670.826859] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 2023-11-08T17:30:08.185106+01:00 heisenberg kernel: [ 670.826869] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 after which it seems the USB tries to reset: 2023-11-08T17:30:08.201123+01:00 heisenberg kernel: [ 670.841837] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:30:08.201143+01:00 heisenberg kernel: [ 670.841907] usb 4-1.4.1: cmd cmplt err -2 2023-11-08T17:30:08.201144+01:00 heisenberg kernel: [ 670.841958] usb 4-1.4.1: cmd cmplt err -2 2023-11-08T17:30:08.281288+01:00 heisenberg kernel: [ 670.922669] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:30:08.305149+01:00 heisenberg kernel: [ 670.949191] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:30:38.901160+01:00 heisenberg kernel: [ 701.542209] scsi host0: uas_eh_device_reset_handler start which also happen numerous times, until finally: 2023-11-08T17:32:52.089105+01:00 heisenberg kernel: [ 834.733272] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089108+01:00 heisenberg kernel: [ 834.733286] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089109+01:00 heisenberg kernel: [ 834.733290] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089112+01:00 heisenberg kernel: [ 834.733293] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089113+01:00 heisenberg kernel: [ 834.733296] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089114+01:00 heisenberg kernel: [ 834.733299] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089115+01:00 heisenberg kernel: [ 834.733318] sd 0:0:0:0: [sda] tag#5 timing out command, waited 180s 2023-11-08T17:32:52.089116+01:00 heisenberg kernel: [ 834.733324] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089117+01:00 heisenberg kernel: [ 834.733329] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:32:52.089118+01:00 heisenberg kernel: [ 834.733333] I/O error, dev sda, sector 44369920 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089119+01:00 heisenberg kernel: [ 834.733362] sd 0:0:0:0: [sda] tag#4 timing out command, waited 180s 2023-11-08T17:32:52.089120+01:00 heisenberg kernel: [ 834.733367] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089121+01:00 heisenberg kernel: [ 834.733371] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:32:52.089122+01:00 heisenberg kernel: [ 834.733374] I/O error, dev sda, sector 44372992 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089125+01:00 heisenberg kernel: [ 834.733391] sd 0:0:0:0: [sda] tag#3 timing out command, waited 180s 2023-11-08T17:32:52.089126+01:00 heisenberg kernel: [ 834.733395] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089128+01:00 heisenberg kernel: [ 834.733399] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:32:52.089129+01:00 heisenberg kernel: [ 834.733402] I/O error, dev sda, sector 44368896 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089130+01:00 heisenberg kernel: [ 834.733412] sd 0:0:0:0: [sda] tag#2 timing out command, waited 180s 2023-11-08T17:32:52.089131+01:00 heisenberg kernel: [ 834.733416] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089133+01:00 heisenberg kernel: [ 834.733419] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:32:52.089134+01:00 heisenberg kernel: [ 834.733422] I/O error, dev sda, sector 44367872 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089135+01:00 heisenberg kernel: [ 834.733432] sd 0:0:0:0: [sda] tag#1 timing out command, waited 180s 2023-11-08T17:32:52.089136+01:00 heisenberg kernel: [ 834.733436] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089137+01:00 heisenberg kernel: [ 834.733440] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:32:52.089138+01:00 heisenberg kernel: [ 834.733442] I/O error, dev sda, sector 44370944 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089139+01:00 heisenberg kernel: [ 834.733451] sd 0:0:0:0: [sda] tag#0 timing out command, waited 180s 2023-11-08T17:32:52.089141+01:00 heisenberg kernel: [ 834.733455] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089142+01:00 heisenberg kernel: [ 834.733459] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:32:52.089143+01:00 heisenberg kernel: [ 834.733461] I/O error, dev sda, sector 44371968 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089144+01:00 heisenberg kernel: [ 834.733474] sd 0:0:0:0: rejecting I/O to offline device 2023-11-08T17:32:52.089146+01:00 heisenberg kernel: [ 834.733479] I/O error, dev sda, sector 44374016 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089148+01:00 heisenberg kernel: [ 834.733495] I/O error, dev sda, sector 44377088 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089149+01:00 heisenberg kernel: [ 834.733491] I/O error, dev sda, sector 44375040 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089151+01:00 heisenberg kernel: [ 834.733503] I/O error, dev sda, sector 44378112 op 0x0:(READ) flags 0x80700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089152+01:00 heisenberg kernel: [ 834.733615] Buffer I/O error on dev dm-1, logical block 0, async page read More detailed kernel log can be found in the attached kern.log.hdd-errors, which also includes numerous runs of all that. (I'd have even more logs, cause I rebooted several times and tried again). The 2 HDDs are brand new, but since in multiple tries always the same of the two was affected... and since that drive may indeed be damaged (very strange sounds numerous times when it spun up - and I know exactly how that model does sound cause I have many of them), I thought at first it might be just the drive that's broken. So I replaced it with another drive (Seagate 8TB), which ran fine for quite a while now, but same issue. So it's not the drive. The port replicator has 4 USB-C ports, one is apparently the TB4 one and for connecting it to the notebook (and the whole port replicator is only recognised by Linux when using that port). On the 3 remaining ones, there was one for the HDD that didn't show errors (in numerous tries)... and the other HDD I swapped between the two remaining USB-C ports, and in both cases the SATA-USB adapter was recognised as SuperSpeed Plus Gen 2x1 USB device, and in both cases I got the error. So I'd assume it's either both ports are bad, or it doesn't depend on the port at all. Now one could argue that it might be the SATA-USB adapter that is buggy, but I doubt: I also have the docking station for the Fujitsu U7512. When copying repeatedly failed, I switched over to that (completely rebooted the system, port replicator not connected at all). The docking station has - amongst others - also two USB-C ports, these however are slower and detect the SATA-USB adapters only as: [Nov12 15:37] usb 2-4.1: new SuperSpeed USB device number 5 using xhci_hcd [ +0,029054] usb 2-4.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 [ +0,000021] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000007] usb 2-4.1: Product: HDD Enclosure [ +0,000005] usb 2-4.1: Manufacturer: Inateck Technology Inc [ +0,000003] usb 2-4.1: SerialNumber: ABCDEFA74566 [ +0,000401] usb 2-4.1: Device is not authorized for usage [ +2,602948] usb 2-4.1: authorized to connect [ +0,026238] scsi host0: uas [ +0,000251] usbcore: registered new interface driver uas [ +0,059408] scsi 0:0:0:0: Direct-Access ST20000N M007D-3DJ103 SN03 PQ: 0 ANSI: 6 [ +0,005337] sd 0:0:0:0: [sda] 39063650304 512-byte logical blocks: (20.0 TB/18.2 TiB) [ +0,000014] sd 0:0:0:0: [sda] 4096-byte physical blocks [ +0,000225] sd 0:0:0:0: [sda] Write Protect is off [ +0,000006] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 [ +0,000460] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000247] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ +0,000006] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ +0,045986] sda: sda1 sda2 [ +0,000490] sd 0:0:0:0: [sda] Attached SCSI disk [ +0,013966] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ +0,157393] BTRFS: device label data-b-1-meta devid 1 transid 12 /dev/sda2 scanned by (udev-worker) (6005) So same adapters, same cables, but docking station instead of port replicator, and slower USB mode. With that configuration, I've copied&diffed all data from the new but questionable HDD over to another one, and copied the data from that to two further ones (but not yet diffed). All the same HDD model (Exos 20GB), all brand new. So there were 4 in total but I will get the questionable one replaced. No errors. So even when copying the data from the questionable one, all went fine (just the SMART for that one, shows some 4 million command timeouts, the strange sound at spin up is also gone... so far). Any ideas what happens there? I seems as if it would be either the port replicator (which AFAIU tunnels the USB from the SATA-USB adapters via TB4???) ... or perhaps it could be the SATA-USB adapter but only when run as SuperSpeed Plus Gen 2x1 USB device, not when run just as SuperSpeed USB device. Could it be some USB or TB driver issue? At one occasion, the detection of the TB4 port replicator itself seems to have gotten into some error loop. I could only cure that by powering of the port replicator. The kernel log for that is in kern.log.pr-failure-loop. Thanks, Chris. PS: I'm not subscribed, so please keep me CCed.
2023-11-08T17:20:01.273986+01:00 heisenberg kernel: [ 1.892879] ACPI: bus type USB registered 2023-11-08T17:20:01.273986+01:00 heisenberg kernel: [ 1.894213] usbcore: registered new interface driver usbfs 2023-11-08T17:20:01.273989+01:00 heisenberg kernel: [ 1.895040] usbcore: registered new interface driver hub 2023-11-08T17:20:01.273989+01:00 heisenberg kernel: [ 1.895848] usbcore: registered new device driver usb 2023-11-08T17:20:01.273989+01:00 heisenberg kernel: [ 1.896852] AES CTR mode by8 optimization enabled 2023-11-08T17:20:01.273990+01:00 heisenberg kernel: [ 1.900105] ACPI: bus type thunderbolt registered 2023-11-08T17:20:01.273990+01:00 heisenberg kernel: [ 1.908459] nvme 0000:01:00.0: platform quirk: setting simple suspend 2023-11-08T17:20:01.273990+01:00 heisenberg kernel: [ 1.909456] ACPI: bus type drm_connector registered 2023-11-08T17:20:01.273993+01:00 heisenberg kernel: [ 1.909529] nvme nvme0: pci function 0000:01:00.0 2023-11-08T17:20:01.273993+01:00 heisenberg kernel: [ 1.923512] nvme nvme0: Shutdown timeout set to 10 seconds 2023-11-08T17:20:01.273993+01:00 heisenberg kernel: [ 1.929056] nvme nvme0: 16/0/0 default/read/poll queues 2023-11-08T17:20:01.273994+01:00 heisenberg kernel: [ 1.932130] nvme0n1: p1 p2 p3 2023-11-08T17:20:01.273994+01:00 heisenberg kernel: [ 1.934536] xhci_hcd 0000:00:14.0: xHCI Host Controller 2023-11-08T17:20:01.273994+01:00 heisenberg kernel: [ 1.935057] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 2023-11-08T17:20:01.273995+01:00 heisenberg kernel: [ 1.936731] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810 2023-11-08T17:20:01.273997+01:00 heisenberg kernel: [ 1.937572] pps pps0: new PPS source ptp0 2023-11-08T17:20:01.273997+01:00 heisenberg kernel: [ 1.937606] xhci_hcd 0000:00:14.0: xHCI Host Controller 2023-11-08T17:20:01.273998+01:00 heisenberg kernel: [ 1.938115] igc 0000:28:00.0 (unnamed net_device) (uninitialized): PHC added 2023-11-08T17:20:01.273998+01:00 heisenberg kernel: [ 1.938612] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 2023-11-08T17:20:01.273998+01:00 heisenberg kernel: [ 1.939623] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed 2023-11-08T17:20:01.273999+01:00 heisenberg kernel: [ 1.940077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 2023-11-08T17:20:01.274001+01:00 heisenberg kernel: [ 1.940472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:20:01.274002+01:00 heisenberg kernel: [ 1.940864] usb usb1: Product: xHCI Host Controller 2023-11-08T17:20:01.274002+01:00 heisenberg kernel: [ 1.941281] usb usb1: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:20:01.274002+01:00 heisenberg kernel: [ 1.941687] usb usb1: SerialNumber: 0000:00:14.0 2023-11-08T17:20:01.274003+01:00 heisenberg kernel: [ 1.942183] hub 1-0:1.0: USB hub found 2023-11-08T17:20:01.274003+01:00 heisenberg kernel: [ 1.942611] hub 1-0:1.0: 12 ports detected 2023-11-08T17:20:01.274005+01:00 heisenberg kernel: [ 1.946384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 2023-11-08T17:20:01.274006+01:00 heisenberg kernel: [ 1.946766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:20:01.274006+01:00 heisenberg kernel: [ 1.947145] usb usb2: Product: xHCI Host Controller 2023-11-08T17:20:01.274006+01:00 heisenberg kernel: [ 1.947562] usb usb2: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:20:01.274007+01:00 heisenberg kernel: [ 1.947956] usb usb2: SerialNumber: 0000:00:14.0 2023-11-08T17:20:01.274007+01:00 heisenberg kernel: [ 1.948433] hub 2-0:1.0: USB hub found 2023-11-08T17:20:01.274007+01:00 heisenberg kernel: [ 1.948854] hub 2-0:1.0: 4 ports detected 2023-11-08T17:20:01.274010+01:00 heisenberg kernel: [ 1.962978] igc 0000:28:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link) 2023-11-08T17:20:01.274010+01:00 heisenberg kernel: [ 1.963465] igc 0000:28:00.0 eth0: MAC: e4:46:b0:1f:e0:27 2023-11-08T17:20:01.274010+01:00 heisenberg kernel: [ 1.965069] igc 0000:28:00.0 eth1: renamed from eth0 2023-11-08T17:20:01.274011+01:00 heisenberg kernel: [ 2.099167] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock 2023-11-08T17:20:01.274011+01:00 heisenberg kernel: [ 2.159004] i915 0000:00:02.0: [drm] VT-d active for gfx access 2023-11-08T17:20:01.274011+01:00 heisenberg kernel: [ 2.159627] Console: switching to colour dummy device 80x25 2023-11-08T17:20:01.274014+01:00 heisenberg kernel: [ 2.159656] i915 0000:00:02.0: vgaarb: deactivate vga console 2023-11-08T17:20:01.274014+01:00 heisenberg kernel: [ 2.159696] i915 0000:00:02.0: [drm] Using Transparent Hugepages 2023-11-08T17:20:01.274014+01:00 heisenberg kernel: [ 2.160207] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem 2023-11-08T17:20:01.274015+01:00 heisenberg kernel: [ 2.160303] i915 0000:00:02.0: firmware: direct-loading firmware i915/adlp_dmc.bin 2023-11-08T17:20:01.274015+01:00 heisenberg kernel: [ 2.162461] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.19) 2023-11-08T17:20:01.274015+01:00 heisenberg kernel: [ 2.171154] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) e4:46:b0:18:03:5b 2023-11-08T17:20:01.274018+01:00 heisenberg kernel: [ 2.171160] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection 2023-11-08T17:20:01.274018+01:00 heisenberg kernel: [ 2.171331] e1000e 0000:00:1f.6 eth0: MAC: 15, PHY: 12, PBA No: FFFFFF-0FF 2023-11-08T17:20:01.274019+01:00 heisenberg kernel: [ 2.177295] i915 0000:00:02.0: firmware: direct-loading firmware i915/adlp_guc_70.bin 2023-11-08T17:20:01.274019+01:00 heisenberg kernel: [ 2.178249] i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_huc.bin 2023-11-08T17:20:01.274019+01:00 heisenberg kernel: [ 2.182498] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 2023-11-08T17:20:01.274019+01:00 heisenberg kernel: [ 2.182502] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 2023-11-08T17:20:01.274020+01:00 heisenberg kernel: [ 2.200074] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads 2023-11-08T17:20:01.274022+01:00 heisenberg kernel: [ 2.200461] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled 2023-11-08T17:20:01.274023+01:00 heisenberg kernel: [ 2.200464] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled 2023-11-08T17:20:01.274023+01:00 heisenberg kernel: [ 2.200885] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled 2023-11-08T17:20:01.274023+01:00 heisenberg kernel: [ 2.201779] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized 2023-11-08T17:20:01.274024+01:00 heisenberg kernel: [ 2.205079] usb 1-1: new high-speed USB device number 2 using xhci_hcd 2023-11-08T17:20:01.274024+01:00 heisenberg kernel: [ 2.353758] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:20:01.274026+01:00 heisenberg kernel: [ 2.353776] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274027+01:00 heisenberg kernel: [ 2.353795] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:20:01.274027+01:00 heisenberg kernel: [ 2.353806] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:20:01.274027+01:00 heisenberg kernel: [ 2.356568] hub 1-1:1.0: USB hub found 2023-11-08T17:20:01.274028+01:00 heisenberg kernel: [ 2.356666] hub 1-1:1.0: 6 ports detected 2023-11-08T17:20:01.274028+01:00 heisenberg kernel: [ 2.485096] usb 1-5: new high-speed USB device number 3 using xhci_hcd 2023-11-08T17:20:01.274032+01:00 heisenberg kernel: [ 2.634626] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32 2023-11-08T17:20:01.274032+01:00 heisenberg kernel: [ 2.634643] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 2023-11-08T17:20:01.274033+01:00 heisenberg kernel: [ 2.634654] usb 1-5: Product: USB2.0 Hub 2023-11-08T17:20:01.274033+01:00 heisenberg kernel: [ 2.637578] hub 1-5:1.0: USB hub found 2023-11-08T17:20:01.274033+01:00 heisenberg kernel: [ 2.637910] hub 1-5:1.0: 4 ports detected 2023-11-08T17:20:01.274034+01:00 heisenberg kernel: [ 2.773083] usb 1-6: new high-speed USB device number 4 using xhci_hcd 2023-11-08T17:20:01.274034+01:00 heisenberg kernel: [ 2.930280] usb 1-6: New USB device found, idVendor=04f2, idProduct=b704, bcdDevice=33.05 2023-11-08T17:20:01.274065+01:00 heisenberg kernel: [ 2.930289] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274065+01:00 heisenberg kernel: [ 2.930294] usb 1-6: Product: FJ Camera 2023-11-08T17:20:01.274066+01:00 heisenberg kernel: [ 2.930298] usb 1-6: Manufacturer: Chicony 2023-11-08T17:20:01.274066+01:00 heisenberg kernel: [ 3.005082] usb 1-1.2: new full-speed USB device number 5 using xhci_hcd 2023-11-08T17:20:01.274066+01:00 heisenberg kernel: [ 3.109701] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:20:01.274067+01:00 heisenberg kernel: [ 3.109723] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:20:01.274069+01:00 heisenberg kernel: [ 3.109733] usb 1-1.2: Product: DMC Device 2023-11-08T17:20:01.274069+01:00 heisenberg kernel: [ 3.109736] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:20:01.274070+01:00 heisenberg kernel: [ 3.109740] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:20:01.274070+01:00 heisenberg kernel: [ 3.189081] usb 1-5.2: new full-speed USB device number 6 using xhci_hcd 2023-11-08T17:20:01.274070+01:00 heisenberg kernel: [ 3.214128] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:20:01.274071+01:00 heisenberg kernel: [ 3.281320] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:20:01.274071+01:00 heisenberg kernel: [ 3.281327] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:20:01.274075+01:00 heisenberg kernel: [ 3.299402] usb 1-5.2: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20 2023-11-08T17:20:01.274075+01:00 heisenberg kernel: [ 3.299423] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274075+01:00 heisenberg kernel: [ 3.299429] usb 1-5.2: Product: EMV Smartcard Reader 2023-11-08T17:20:01.274076+01:00 heisenberg kernel: [ 3.299433] usb 1-5.2: Manufacturer: Generic 2023-11-08T17:20:01.274076+01:00 heisenberg kernel: [ 3.417083] usb 1-7: new high-speed USB device number 7 using xhci_hcd 2023-11-08T17:20:01.274076+01:00 heisenberg kernel: [ 3.570838] usb 1-7: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00 2023-11-08T17:20:01.274079+01:00 heisenberg kernel: [ 3.570846] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274079+01:00 heisenberg kernel: [ 3.570853] usb 1-7: Product: Mass Storage Device 2023-11-08T17:20:01.274079+01:00 heisenberg kernel: [ 3.570859] usb 1-7: Manufacturer: JetFlash 2023-11-08T17:20:01.274080+01:00 heisenberg kernel: [ 3.584692] SCSI subsystem initialized 2023-11-08T17:20:01.274080+01:00 heisenberg kernel: [ 3.586696] usb-storage 1-7:1.0: USB Mass Storage device detected 2023-11-08T17:20:01.274080+01:00 heisenberg kernel: [ 3.586891] scsi host0: usb-storage 1-7:1.0 2023-11-08T17:20:01.274083+01:00 heisenberg kernel: [ 3.586953] usbcore: registered new interface driver usb-storage 2023-11-08T17:20:01.274083+01:00 heisenberg kernel: [ 3.653085] usb 1-1.4: new high-speed USB device number 8 using xhci_hcd 2023-11-08T17:20:01.274083+01:00 heisenberg kernel: [ 3.754347] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:20:01.274084+01:00 heisenberg kernel: [ 3.754356] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274084+01:00 heisenberg kernel: [ 3.754362] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:20:01.274084+01:00 heisenberg kernel: [ 3.754365] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:20:01.274084+01:00 heisenberg kernel: [ 3.755481] hub 1-1.4:1.0: USB hub found 2023-11-08T17:20:01.274087+01:00 heisenberg kernel: [ 3.755528] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:20:01.274087+01:00 heisenberg kernel: [ 3.796590] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 2023-11-08T17:20:01.274088+01:00 heisenberg kernel: [ 3.798748] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) 2023-11-08T17:20:01.274088+01:00 heisenberg kernel: [ 3.799106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1 2023-11-08T17:20:01.274088+01:00 heisenberg kernel: [ 3.801558] fbcon: i915drmfb (fb0) is primary device 2023-11-08T17:20:01.274088+01:00 heisenberg kernel: [ 3.809856] Console: switching to colour frame buffer device 240x67 2023-11-08T17:20:01.274091+01:00 heisenberg kernel: [ 3.829582] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device 2023-11-08T17:20:01.274091+01:00 heisenberg kernel: [ 3.881108] usb 1-10: new full-speed USB device number 9 using xhci_hcd 2023-11-08T17:20:01.274091+01:00 heisenberg kernel: [ 4.040276] usb 1-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00 2023-11-08T17:20:01.274092+01:00 heisenberg kernel: [ 4.040314] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2023-11-08T17:20:01.274092+01:00 heisenberg kernel: [ 4.452781] xhci_hcd 0000:00:0d.0: xHCI Host Controller 2023-11-08T17:20:01.274092+01:00 heisenberg kernel: [ 4.452857] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 3 2023-11-08T17:20:01.274095+01:00 heisenberg kernel: [ 4.454231] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 2023-11-08T17:20:01.274095+01:00 heisenberg kernel: [ 4.454710] xhci_hcd 0000:00:0d.0: xHCI Host Controller 2023-11-08T17:20:01.274095+01:00 heisenberg kernel: [ 4.454743] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4 2023-11-08T17:20:01.274096+01:00 heisenberg kernel: [ 4.454777] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed 2023-11-08T17:20:01.274096+01:00 heisenberg kernel: [ 4.454863] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 2023-11-08T17:20:01.274096+01:00 heisenberg kernel: [ 4.454894] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:20:01.274097+01:00 heisenberg kernel: [ 4.454918] usb usb3: Product: xHCI Host Controller 2023-11-08T17:20:01.274099+01:00 heisenberg kernel: [ 4.454936] usb usb3: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:20:01.274099+01:00 heisenberg kernel: [ 4.454957] usb usb3: SerialNumber: 0000:00:0d.0 2023-11-08T17:20:01.274100+01:00 heisenberg kernel: [ 4.455189] hub 3-0:1.0: USB hub found 2023-11-08T17:20:01.274100+01:00 heisenberg kernel: [ 4.455221] hub 3-0:1.0: 1 port detected 2023-11-08T17:20:01.274100+01:00 heisenberg kernel: [ 4.456217] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 2023-11-08T17:20:01.274100+01:00 heisenberg kernel: [ 4.456243] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:20:01.274103+01:00 heisenberg kernel: [ 4.456263] usb usb4: Product: xHCI Host Controller 2023-11-08T17:20:01.274103+01:00 heisenberg kernel: [ 4.456278] usb usb4: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:20:01.274103+01:00 heisenberg kernel: [ 4.456295] usb usb4: SerialNumber: 0000:00:0d.0 2023-11-08T17:20:01.274104+01:00 heisenberg kernel: [ 4.456457] hub 4-0:1.0: USB hub found 2023-11-08T17:20:01.274104+01:00 heisenberg kernel: [ 4.456482] hub 4-0:1.0: 2 ports detected 2023-11-08T17:20:01.274104+01:00 heisenberg kernel: [ 4.473312] usb 1-1.4.3: new high-speed USB device number 10 using xhci_hcd 2023-11-08T17:20:01.274107+01:00 heisenberg kernel: [ 4.549162] raid6: avx2x4 gen() 42787 MB/s 2023-11-08T17:20:01.274107+01:00 heisenberg kernel: [ 4.587399] usb 1-1.4.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.26 2023-11-08T17:20:01.274107+01:00 heisenberg kernel: [ 4.587412] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274108+01:00 heisenberg kernel: [ 4.587422] usb 1-1.4.3: Product: 4-Port USB 2.1 Hub 2023-11-08T17:20:01.274108+01:00 heisenberg kernel: [ 4.587429] usb 1-1.4.3: Manufacturer: Generic 2023-11-08T17:20:01.274108+01:00 heisenberg kernel: [ 4.589619] hub 1-1.4.3:1.0: USB hub found 2023-11-08T17:20:01.274109+01:00 heisenberg kernel: [ 4.590876] hub 1-1.4.3:1.0: 4 ports detected 2023-11-08T17:20:01.274111+01:00 heisenberg kernel: [ 4.617176] raid6: avx2x2 gen() 47198 MB/s 2023-11-08T17:20:01.274111+01:00 heisenberg kernel: [ 4.673255] usb 1-1.4.4: new high-speed USB device number 11 using xhci_hcd 2023-11-08T17:20:01.274112+01:00 heisenberg kernel: [ 4.685176] raid6: avx2x1 gen() 45005 MB/s 2023-11-08T17:20:01.274112+01:00 heisenberg kernel: [ 4.685182] raid6: using algorithm avx2x2 gen() 47198 MB/s 2023-11-08T17:20:01.274112+01:00 heisenberg kernel: [ 4.753146] raid6: .... xor() 31637 MB/s, rmw enabled 2023-11-08T17:20:01.274112+01:00 heisenberg kernel: [ 4.753153] raid6: using avx2x2 recovery algorithm 2023-11-08T17:20:01.274115+01:00 heisenberg kernel: [ 4.864693] scsi 0:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4 2023-11-08T17:20:01.274115+01:00 heisenberg kernel: [ 4.867615] xor: automatically using best checksumming function avx 2023-11-08T17:20:01.274115+01:00 heisenberg kernel: [ 4.872212] sd 0:0:0:0: [sda] 31690752 512-byte logical blocks: (16.2 GB/15.1 GiB) 2023-11-08T17:20:01.274116+01:00 heisenberg kernel: [ 4.874435] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:20:01.274116+01:00 heisenberg kernel: [ 4.875256] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 2023-11-08T17:20:01.274116+01:00 heisenberg kernel: [ 4.875680] sd 0:0:0:0: [sda] No Caching mode page found 2023-11-08T17:20:01.274117+01:00 heisenberg kernel: [ 4.876480] sd 0:0:0:0: [sda] Assuming drive cache: write through 2023-11-08T17:20:01.274119+01:00 heisenberg kernel: [ 4.888409] sda: sda1 sda2 sda3 sda4 sda5 2023-11-08T17:20:01.274119+01:00 heisenberg kernel: [ 4.889134] sd 0:0:0:0: [sda] Attached SCSI removable disk 2023-11-08T17:20:01.274120+01:00 heisenberg kernel: [ 4.936718] Btrfs loaded, zoned=yes, fsverity=yes 2023-11-08T17:20:01.274120+01:00 heisenberg kernel: [ 4.954189] async_tx: api initialized (async) 2023-11-08T17:20:01.274120+01:00 heisenberg kernel: [ 4.979962] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. 2023-11-08T17:20:01.274120+01:00 heisenberg kernel: [ 4.980609] device-mapper: uevent: version 1.0.3 2023-11-08T17:20:01.274124+01:00 heisenberg kernel: [ 4.981271] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxx 2023-11-08T17:20:01.274124+01:00 heisenberg kernel: [ 4.989095] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd 2023-11-08T17:20:01.274125+01:00 heisenberg kernel: [ 5.013559] usb 4-1: New USB device found, idVendor=8087, idProduct=0b40, bcdDevice=12.34 2023-11-08T17:20:01.274125+01:00 heisenberg kernel: [ 5.014170] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274125+01:00 heisenberg kernel: [ 5.014812] usb 4-1: Product: USB3.0 Hub 2023-11-08T17:20:01.274125+01:00 heisenberg kernel: [ 5.015455] usb 4-1: Manufacturer: Intel Corporation. 2023-11-08T17:20:01.274128+01:00 heisenberg kernel: [ 5.016109] usb 1-1.4.4: New USB device found, idVendor=04c5, idProduct=1668, bcdDevice= 0.06 2023-11-08T17:20:01.274128+01:00 heisenberg kernel: [ 5.016760] usb 1-1.4.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 2023-11-08T17:20:01.274129+01:00 heisenberg kernel: [ 5.017058] hub 4-1:1.0: USB hub found 2023-11-08T17:20:01.274129+01:00 heisenberg kernel: [ 5.017244] usb 1-1.4.4: Product: USB Audio 2023-11-08T17:20:01.274129+01:00 heisenberg kernel: [ 5.017734] hub 4-1:1.0: 4 ports detected 2023-11-08T17:20:01.274129+01:00 heisenberg kernel: [ 5.018158] usb 1-1.4.4: Manufacturer: Generic 2023-11-08T17:20:01.274130+01:00 heisenberg kernel: [ 5.019068] usb 1-1.4.4: SerialNumber: 202109030004 2023-11-08T17:20:01.274132+01:00 heisenberg kernel: [ 5.117221] usb 1-1.4.5: new high-speed USB device number 12 using xhci_hcd 2023-11-08T17:20:01.274132+01:00 heisenberg kernel: [ 5.124631] BTRFS: device label gss-boot-sys_ devid 1 transid 61 /dev/sda2 scanned by (udev-worker) (272) 2023-11-08T17:20:01.274133+01:00 heisenberg kernel: [ 5.149320] BTRFS: device label gss-boot-archive_ devid 1 transid 39 /dev/sda4 scanned by (udev-worker) (276) 2023-11-08T17:20:01.274133+01:00 heisenberg kernel: [ 5.159929] BTRFS: device label gss-boot-data_ devid 1 transid 55 /dev/sda3 scanned by (udev-worker) (242) 2023-11-08T17:20:01.274133+01:00 heisenberg kernel: [ 5.160931] BTRFS: device label system-meta devid 1 transid 22 /dev/nvme0n1p3 scanned by (udev-worker) (254) 2023-11-08T17:20:01.274136+01:00 heisenberg kernel: [ 5.169788] BTRFS: device label gss-boot-rescue_ devid 1 transid 304 /dev/sda5 scanned by (udev-worker) (255) 2023-11-08T17:20:01.274161+01:00 heisenberg kernel: [ 5.191172] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:20:01.274161+01:00 heisenberg kernel: [ 5.191754] BTRFS info (device sda3): disk space caching is enabled 2023-11-08T17:20:01.274162+01:00 heisenberg kernel: [ 5.206823] BTRFS: device label gss-boot-data_ devid 1 transid 55 /dev/disk/by-label/gss-boot-data_ scanned by mount (493) 2023-11-08T17:20:01.274162+01:00 heisenberg kernel: [ 5.208854] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:20:01.274162+01:00 heisenberg kernel: [ 5.209539] BTRFS info (device sda3): disk space caching is enabled 2023-11-08T17:20:01.274165+01:00 heisenberg kernel: [ 5.221988] usb 1-1.4.5: New USB device found, idVendor=0424, idProduct=7240, bcdDevice= 6.30 2023-11-08T17:20:01.274165+01:00 heisenberg kernel: [ 5.222782] usb 1-1.4.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274165+01:00 heisenberg kernel: [ 5.223539] usb 1-1.4.5: Product: USB2 Controller Hub 2023-11-08T17:20:01.274166+01:00 heisenberg kernel: [ 5.224255] usb 1-1.4.5: Manufacturer: Microchip Tech 2023-11-08T17:20:01.274166+01:00 heisenberg kernel: [ 5.557536] usb 4-1.4: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd 2023-11-08T17:20:01.274166+01:00 heisenberg kernel: [ 5.579365] usb 4-1.4: New USB device found, idVendor=0424, idProduct=7252, bcdDevice= 6.30 2023-11-08T17:20:01.274169+01:00 heisenberg kernel: [ 5.579376] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274169+01:00 heisenberg kernel: [ 5.579380] usb 4-1.4: Product: USB7252 Smart Hub 2023-11-08T17:20:01.274169+01:00 heisenberg kernel: [ 5.579382] usb 4-1.4: Manufacturer: Microchip 2023-11-08T17:20:01.274170+01:00 heisenberg kernel: [ 5.580271] hub 4-1.4:1.0: USB hub found 2023-11-08T17:20:01.274170+01:00 heisenberg kernel: [ 5.580301] hub 4-1.4:1.0: 3 ports detected 2023-11-08T17:20:01.274170+01:00 heisenberg kernel: [ 5.866298] usb 4-1.4.3: new SuperSpeed USB device number 4 using xhci_hcd 2023-11-08T17:20:01.274171+01:00 heisenberg kernel: [ 5.908567] usb 4-1.4.3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.26 2023-11-08T17:20:01.274173+01:00 heisenberg kernel: [ 5.908577] usb 4-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:20:01.274173+01:00 heisenberg kernel: [ 5.908580] usb 4-1.4.3: Product: 4-Port USB 3.1 Hub 2023-11-08T17:20:01.274174+01:00 heisenberg kernel: [ 5.908582] usb 4-1.4.3: Manufacturer: Generic 2023-11-08T17:20:01.274174+01:00 heisenberg kernel: [ 5.914695] hub 4-1.4.3:1.0: USB hub found 2023-11-08T17:20:01.274174+01:00 heisenberg kernel: [ 5.916417] hub 4-1.4.3:1.0: 4 ports detected 2023-11-08T17:20:01.274174+01:00 heisenberg kernel: [ 6.221451] usb 4-1.4.3.4: new SuperSpeed USB device number 5 using xhci_hcd 2023-11-08T17:20:01.274177+01:00 heisenberg kernel: [ 6.242964] usb 4-1.4.3.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.01 2023-11-08T17:20:01.274177+01:00 heisenberg kernel: [ 6.242974] usb 4-1.4.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 2023-11-08T17:20:01.274177+01:00 heisenberg kernel: [ 6.242978] usb 4-1.4.3.4: Product: USB 10/100/1000 LAN 2023-11-08T17:20:01.274178+01:00 heisenberg kernel: [ 6.242980] usb 4-1.4.3.4: Manufacturer: Realtek 2023-11-08T17:20:01.274178+01:00 heisenberg kernel: [ 6.242982] usb 4-1.4.3.4: SerialNumber: 101000001 2023-11-08T17:20:01.274178+01:00 heisenberg kernel: [ 6.253227] usbcore: registered new device driver r8152-cfgselector 2023-11-08T17:20:01.274181+01:00 heisenberg kernel: [ 6.337657] r8152-cfgselector 4-1.4.3.4: reset SuperSpeed USB device number 5 using xhci_hcd 2023-11-08T17:20:01.274181+01:00 heisenberg kernel: [ 6.361278] r8152 4-1.4.3.4:1.0: firmware: failed to load rtl_nic/rtl8153b-2.fw (-2) 2023-11-08T17:20:01.274181+01:00 heisenberg kernel: [ 6.361285] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware 2023-11-08T17:20:01.274182+01:00 heisenberg kernel: [ 6.361296] r8152 4-1.4.3.4:1.0: firmware: failed to load rtl_nic/rtl8153b-2.fw (-2) 2023-11-08T17:20:01.274182+01:00 heisenberg kernel: [ 6.361299] r8152 4-1.4.3.4:1.0: Direct firmware load for rtl_nic/rtl8153b-2.fw failed with error -2 2023-11-08T17:20:01.274182+01:00 heisenberg kernel: [ 6.361303] r8152 4-1.4.3.4:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw (-2) 2023-11-08T17:20:01.274185+01:00 heisenberg kernel: [ 6.413477] r8152 4-1.4.3.4:1.0 eth2: v1.12.13 2023-11-08T17:20:01.274185+01:00 heisenberg kernel: [ 6.413528] usbcore: registered new interface driver r8152 2023-11-08T17:20:01.274186+01:00 heisenberg kernel: [ 6.419438] usbcore: registered new interface driver cdc_ether 2023-11-08T17:20:01.274186+01:00 heisenberg kernel: [ 6.420094] usbcore: registered new interface driver r8153_ecm 2023-11-08T17:20:01.274186+01:00 heisenberg kernel: [ 9.490585] usb 1-7: USB disconnect, device number 7 2023-11-08T17:20:01.274187+01:00 heisenberg kernel: [ 61.558117] BTRFS: device label system devid 1 transid 415342 /dev/dm-0 scanned by (udev-worker) (2104) 2023-11-08T17:20:01.274187+01:00 heisenberg kernel: [ 61.587072] PM: Image not found (code -22) 2023-11-08T17:20:01.274189+01:00 heisenberg kernel: [ 61.598094] BTRFS info (device dm-0): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:20:01.274190+01:00 heisenberg kernel: [ 61.598640] BTRFS info (device dm-0): using free space tree 2023-11-08T17:20:01.274190+01:00 heisenberg kernel: [ 61.740544] BTRFS info (device dm-0): enabling ssd optimizations 2023-11-08T17:20:01.274190+01:00 heisenberg kernel: [ 61.780989] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. 2023-11-08T17:20:01.274216+01:00 heisenberg kernel: [ 62.146116] pstore: Using crash dump compression: deflate 2023-11-08T17:20:01.274217+01:00 heisenberg kernel: [ 62.170896] fuse: init (API version 7.38) 2023-11-08T17:20:01.274219+01:00 heisenberg kernel: [ 62.172581] loop: module loaded 2023-11-08T17:20:01.274220+01:00 heisenberg kernel: [ 62.176830] lp: driver loaded but no devices found 2023-11-08T17:20:01.274220+01:00 heisenberg kernel: [ 62.184686] ppdev: user-space parallel port driver 2023-11-08T17:20:01.274221+01:00 heisenberg kernel: [ 62.215115] pstore: Registered efi_pstore as persistent store backend 2023-11-08T17:20:01.274221+01:00 heisenberg kernel: [ 62.364108] BTRFS info: devid 1 device path /dev/mapper/system changed to /dev/dm-0 scanned by (udev-worker) (2280) 2023-11-08T17:20:01.274221+01:00 heisenberg kernel: [ 62.365699] BTRFS info: devid 1 device path /dev/dm-0 changed to /dev/mapper/system scanned by (udev-worker) (2280) 2023-11-08T17:20:01.274225+01:00 heisenberg kernel: [ 62.384191] intel_pmc_core INT33A1:00: initialized 2023-11-08T17:20:01.274225+01:00 heisenberg kernel: [ 62.389703] ACPI: AC: AC Adapter [AC] (on-line) 2023-11-08T17:20:01.274226+01:00 heisenberg kernel: [ 62.399264] input: Intel HID events as /devices/platform/INTC1070:00/input/input2 2023-11-08T17:20:01.274226+01:00 heisenberg kernel: [ 62.400346] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] 2023-11-08T17:20:01.274226+01:00 heisenberg kernel: [ 62.407815] ACPI: \_SB_.FEXT: BTNI: [0x10001] 2023-11-08T17:20:01.274226+01:00 heisenberg kernel: [ 62.408798] intel-hid INTC1070:00: platform supports 5 button array 2023-11-08T17:20:01.274229+01:00 heisenberg kernel: [ 62.413420] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input3 2023-11-08T17:20:01.274229+01:00 heisenberg kernel: [ 62.414608] Consider using thermal netlink events interface 2023-11-08T17:20:01.274230+01:00 heisenberg kernel: [ 62.416012] input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input4 2023-11-08T17:20:01.274230+01:00 heisenberg kernel: [ 62.419086] intel-hid INTC1070:00: failed to get button capability 2023-11-08T17:20:01.274230+01:00 heisenberg kernel: [ 62.419854] intel-hid INTC1070:00: failed to enable HID power button 2023-11-08T17:20:01.274231+01:00 heisenberg kernel: [ 62.430958] hid: raw HID events driver (C) Jiri Kosina 2023-11-08T17:20:01.274231+01:00 heisenberg kernel: [ 62.432164] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff] 2023-11-08T17:20:01.274233+01:00 heisenberg kernel: [ 62.432930] caller igen6_probe+0x1a0/0x8d0 [igen6_edac] mapping multiple BARs 2023-11-08T17:20:01.274234+01:00 heisenberg kernel: [ 62.437634] fujitsu_laptop: driver 0.6.0 successfully loaded 2023-11-08T17:20:01.274234+01:00 heisenberg kernel: [ 62.449545] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) 2023-11-08T17:20:01.274234+01:00 heisenberg kernel: [ 62.454790] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 2023-11-08T17:20:01.274235+01:00 heisenberg kernel: [ 62.467751] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) 2023-11-08T17:20:01.274235+01:00 heisenberg kernel: [ 62.469133] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR 2023-11-08T17:20:01.274239+01:00 heisenberg kernel: [ 62.469135] EDAC igen6 MC1: ADDR 0x7fffffffe0 2023-11-08T17:20:01.274239+01:00 heisenberg kernel: [ 62.469137] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR 2023-11-08T17:20:01.274239+01:00 heisenberg kernel: [ 62.469138] EDAC igen6 MC0: ADDR 0x7fffffffe0 2023-11-08T17:20:01.274240+01:00 heisenberg kernel: [ 62.469731] ACPI: button: Power Button [PWRB] 2023-11-08T17:20:01.274240+01:00 heisenberg kernel: [ 62.473000] EDAC igen6: v2.5.1 2023-11-08T17:20:01.274240+01:00 heisenberg kernel: [ 62.476935] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 2023-11-08T17:20:01.274243+01:00 heisenberg kernel: [ 62.477214] ACPI Warning: \_SB.CMB1._BIX: Return Package is too small - found 20 elements, expected 21 (20230331/nsprepkg-649) 2023-11-08T17:20:01.274243+01:00 heisenberg kernel: [ 62.489588] ACPI: button: Lid Switch [LID] 2023-11-08T17:20:01.274243+01:00 heisenberg kernel: [ 62.491345] ACPI: battery: Slot [CMB1] (battery present) 2023-11-08T17:20:01.274244+01:00 heisenberg kernel: [ 62.506010] i801_smbus 0000:00:1f.4: SPD Write Disable is set 2023-11-08T17:20:01.274244+01:00 heisenberg kernel: [ 62.506961] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt 2023-11-08T17:20:01.274244+01:00 heisenberg kernel: [ 62.508456] input: PC Speaker as /devices/platform/pcspkr/input/input7 2023-11-08T17:20:01.274247+01:00 heisenberg kernel: [ 62.511199] mei_me 0000:00:16.0: enabling device (0000 -> 0002) 2023-11-08T17:20:01.274247+01:00 heisenberg kernel: [ 62.514602] i2c i2c-14: 2/8 memory slots populated (from DMI) 2023-11-08T17:20:01.274247+01:00 heisenberg kernel: [ 62.515459] i2c i2c-14: Systems with more than 4 memory slots not supported yet, not instantiating SPD 2023-11-08T17:20:01.274248+01:00 heisenberg kernel: [ 62.528414] mc: Linux media interface: v0.10 2023-11-08T17:20:01.274248+01:00 heisenberg kernel: [ 62.553099] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) 2023-11-08T17:20:01.274248+01:00 heisenberg kernel: [ 62.569700] idma64 idma64.0: Found Intel integrated DMA 64-bit 2023-11-08T17:20:01.274251+01:00 heisenberg kernel: [ 62.582270] usbcore: registered new interface driver usbhid 2023-11-08T17:20:01.274251+01:00 heisenberg kernel: [ 62.582273] usbhid: USB HID core driver 2023-11-08T17:20:01.274252+01:00 heisenberg kernel: [ 62.601029] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006) 2023-11-08T17:20:01.274252+01:00 heisenberg kernel: [ 62.606749] idma64 idma64.1: Found Intel integrated DMA 64-bit 2023-11-08T17:20:01.274252+01:00 heisenberg kernel: [ 62.639107] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006) 2023-11-08T17:20:01.274253+01:00 heisenberg kernel: [ 62.640389] idma64 idma64.2: Found Intel integrated DMA 64-bit 2023-11-08T17:20:01.274253+01:00 heisenberg kernel: [ 62.645221] sdhci: Secure Digital Host Controller Interface driver 2023-11-08T17:20:01.274255+01:00 heisenberg kernel: [ 62.645223] sdhci: Copyright(c) Pierre Ossman 2023-11-08T17:20:01.274256+01:00 heisenberg kernel: [ 62.645575] cfg80211: Loading compiled-in X.509 certificates for regulatory database 2023-11-08T17:20:01.274256+01:00 heisenberg kernel: [ 62.645771] Loaded X.509 cert 'benh@xxxxxxxxxx: 577e021cb980e0e820821ba7b54b4961b8b4fadf' 2023-11-08T17:20:01.274256+01:00 heisenberg kernel: [ 62.645905] Loaded X.509 cert 'romain.perier@xxxxxxxxx: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' 2023-11-08T17:20:01.274257+01:00 heisenberg kernel: [ 62.645931] intel_rapl_msr: PL4 support detected. 2023-11-08T17:20:01.274257+01:00 heisenberg kernel: [ 62.646037] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 2023-11-08T17:20:01.274259+01:00 heisenberg kernel: [ 62.646337] input: Generic USB Audio Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.3/0003:04C5:1668.0001/input/input8 2023-11-08T17:20:01.274260+01:00 heisenberg kernel: [ 62.646553] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) 2023-11-08T17:20:01.274284+01:00 heisenberg kernel: [ 62.647401] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) 2023-11-08T17:20:01.274284+01:00 heisenberg kernel: [ 62.647796] platform regulatory.0: firmware: direct-loading firmware regulatory.db 2023-11-08T17:20:01.274284+01:00 heisenberg kernel: [ 62.647874] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s 2023-11-08T17:20:01.274284+01:00 heisenberg kernel: [ 62.657558] intel_rapl_common: Found RAPL domain package 2023-11-08T17:20:01.274287+01:00 heisenberg kernel: [ 62.659577] intel_rapl_common: Found RAPL domain core 2023-11-08T17:20:01.274287+01:00 heisenberg kernel: [ 62.659579] intel_rapl_common: Found RAPL domain uncore 2023-11-08T17:20:01.274288+01:00 heisenberg kernel: [ 62.659581] intel_rapl_common: Found RAPL domain psys 2023-11-08T17:20:01.274288+01:00 heisenberg kernel: [ 62.659585] intel_rapl_common: package-0:package:long_term locked by BIOS 2023-11-08T17:20:01.274288+01:00 heisenberg kernel: [ 62.662988] intel_rapl_common: package-0:package:short_term locked by BIOS 2023-11-08T17:20:01.274289+01:00 heisenberg kernel: [ 62.668682] videodev: Linux video capture interface: v2.00 2023-11-08T17:20:01.274291+01:00 heisenberg kernel: [ 62.678552] Intel(R) Wireless WiFi driver for Linux 2023-11-08T17:20:01.274291+01:00 heisenberg kernel: [ 62.679909] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) 2023-11-08T17:20:01.274292+01:00 heisenberg kernel: [ 62.682675] iwlwifi 0000:00:14.3: Detected crf-id 0x400410, cnv-id 0x80400 wfpm id 0x80000020 2023-11-08T17:20:01.274292+01:00 heisenberg kernel: [ 62.684041] iwlwifi 0000:00:14.3: PCI dev 51f0/0090, rev=0x370, rfid=0x2010d000 2023-11-08T17:20:01.274292+01:00 heisenberg kernel: [ 62.685431] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-83.ucode (-2) 2023-11-08T17:20:01.274292+01:00 heisenberg kernel: [ 62.686756] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-83.ucode (-2) 2023-11-08T17:20:01.274293+01:00 heisenberg kernel: [ 62.688046] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-83.ucode failed with error -2 2023-11-08T17:20:01.274295+01:00 heisenberg kernel: [ 62.689375] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-82.ucode (-2) 2023-11-08T17:20:01.274296+01:00 heisenberg kernel: [ 62.690715] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-82.ucode (-2) 2023-11-08T17:20:01.274296+01:00 heisenberg kernel: [ 62.692014] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-82.ucode failed with error -2 2023-11-08T17:20:01.274296+01:00 heisenberg kernel: [ 62.693303] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-81.ucode (-2) 2023-11-08T17:20:01.274296+01:00 heisenberg kernel: [ 62.694577] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-81.ucode (-2) 2023-11-08T17:20:01.274297+01:00 heisenberg kernel: [ 62.695819] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-81.ucode failed with error -2 2023-11-08T17:20:01.274299+01:00 heisenberg kernel: [ 62.697058] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-80.ucode (-2) 2023-11-08T17:20:01.274300+01:00 heisenberg kernel: [ 62.698332] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-80.ucode (-2) 2023-11-08T17:20:01.274300+01:00 heisenberg kernel: [ 62.699531] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-80.ucode failed with error -2 2023-11-08T17:20:01.274300+01:00 heisenberg kernel: [ 62.700739] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-79.ucode (-2) 2023-11-08T17:20:01.274301+01:00 heisenberg kernel: [ 62.701945] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-79.ucode (-2) 2023-11-08T17:20:01.274301+01:00 heisenberg kernel: [ 62.703115] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-79.ucode failed with error -2 2023-11-08T17:20:01.274303+01:00 heisenberg kernel: [ 62.704284] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-78.ucode (-2) 2023-11-08T17:20:01.274304+01:00 heisenberg kernel: [ 62.705220] input: Generic USB Audio as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.3/0003:04C5:1668.0001/input/input9 2023-11-08T17:20:01.274304+01:00 heisenberg kernel: [ 62.705459] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-78.ucode (-2) 2023-11-08T17:20:01.274304+01:00 heisenberg kernel: [ 62.706833] hid-generic 0003:04C5:1668.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-0000:00:14.0-1.4.4/input3 2023-11-08T17:20:01.274305+01:00 heisenberg kernel: [ 62.707814] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-78.ucode failed with error -2 2023-11-08T17:20:01.274307+01:00 heisenberg kernel: [ 62.710246] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-77.ucode (-2) 2023-11-08T17:20:01.274307+01:00 heisenberg kernel: [ 62.711475] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-77.ucode (-2) 2023-11-08T17:20:01.274308+01:00 heisenberg kernel: [ 62.712673] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-77.ucode failed with error -2 2023-11-08T17:20:01.274308+01:00 heisenberg kernel: [ 62.713869] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-76.ucode (-2) 2023-11-08T17:20:01.274308+01:00 heisenberg kernel: [ 62.715061] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-76.ucode (-2) 2023-11-08T17:20:01.274308+01:00 heisenberg kernel: [ 62.716214] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-76.ucode failed with error -2 2023-11-08T17:20:01.274311+01:00 heisenberg kernel: [ 62.717356] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-75.ucode (-2) 2023-11-08T17:20:01.274311+01:00 heisenberg kernel: [ 62.718473] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-75.ucode (-2) 2023-11-08T17:20:01.274311+01:00 heisenberg kernel: [ 62.719548] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-75.ucode failed with error -2 2023-11-08T17:20:01.274312+01:00 heisenberg kernel: [ 62.720626] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-74.ucode (-2) 2023-11-08T17:20:01.274312+01:00 heisenberg kernel: [ 62.721687] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-74.ucode (-2) 2023-11-08T17:20:01.274312+01:00 heisenberg kernel: [ 62.722715] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-74.ucode failed with error -2 2023-11-08T17:20:01.274315+01:00 heisenberg kernel: [ 62.723648] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-73.ucode (-2) 2023-11-08T17:20:01.274315+01:00 heisenberg kernel: [ 62.724575] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-73.ucode (-2) 2023-11-08T17:20:01.274315+01:00 heisenberg kernel: [ 62.725474] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-73.ucode failed with error -2 2023-11-08T17:20:01.274316+01:00 heisenberg kernel: [ 62.729356] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-so-a0-gf-a0-72.ucode 2023-11-08T17:20:01.274316+01:00 heisenberg kernel: [ 62.733977] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0002/input/input10 2023-11-08T17:20:01.274316+01:00 heisenberg kernel: [ 62.735102] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0002/input/input12 2023-11-08T17:20:01.274319+01:00 heisenberg kernel: [ 62.736144] hid-generic 0018:04F3:31B0.0002: input,hidraw1: I2C HID v1.00 Mouse [0X45 0X4C 0X41 0X4E 04F3:31B0] on i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00 2023-11-08T17:20:01.274320+01:00 heisenberg kernel: [ 62.738813] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver 2023-11-08T17:20:01.274320+01:00 heisenberg kernel: [ 62.738864] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36 2023-11-08T17:20:01.274320+01:00 heisenberg kernel: [ 62.739312] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2) 2023-11-08T17:20:01.274321+01:00 heisenberg kernel: [ 62.739319] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2) 2023-11-08T17:20:01.274321+01:00 heisenberg kernel: [ 62.739322] iwlwifi 0000:00:14.3: loaded firmware version 72.a764baac.0 so-a0-gf-a0-72.ucode op_mode iwlmvm 2023-11-08T17:20:01.274324+01:00 heisenberg kernel: [ 62.744082] iTCO_vendor_support: vendor-support=0 2023-11-08T17:20:01.274325+01:00 heisenberg kernel: [ 62.746539] sdhci-pci 0000:59:00.0: SDHCI controller found [1217:8621] (rev 1) 2023-11-08T17:20:01.274325+01:00 heisenberg kernel: [ 62.749335] sdhci-pci 0000:59:00.0: enabling device (0000 -> 0002) 2023-11-08T17:20:01.274325+01:00 heisenberg kernel: [ 62.755473] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer 2023-11-08T17:20:01.274325+01:00 heisenberg kernel: [ 62.756116] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules 2023-11-08T17:20:01.274326+01:00 heisenberg kernel: [ 62.756720] RAPL PMU: hw unit of domain package 2^-14 Joules 2023-11-08T17:20:01.274328+01:00 heisenberg kernel: [ 62.757363] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules 2023-11-08T17:20:01.274329+01:00 heisenberg kernel: [ 62.757364] RAPL PMU: hw unit of domain psys 2^-14 Joules 2023-11-08T17:20:01.274329+01:00 heisenberg kernel: [ 62.758046] mmc0: SDHCI controller on PCI [0000:59:00.0] using ADMA 2023-11-08T17:20:01.274329+01:00 heisenberg kernel: [ 62.767351] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) 2023-11-08T17:20:01.274329+01:00 heisenberg kernel: [ 62.774144] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 2023-11-08T17:20:01.274330+01:00 heisenberg kernel: [ 62.775235] intel_rapl_common: Found RAPL domain package 2023-11-08T17:20:01.274332+01:00 heisenberg kernel: [ 62.787265] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 2023-11-08T17:20:01.274333+01:00 heisenberg kernel: [ 62.788526] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver 2023-11-08T17:20:01.274333+01:00 heisenberg kernel: [ 62.791925] usb 1-6: Found UVC 1.50 device FJ Camera (04f2:b704) 2023-11-08T17:20:01.274333+01:00 heisenberg kernel: [ 62.815066] usbcore: registered new interface driver uvcvideo 2023-11-08T17:20:01.274333+01:00 heisenberg kernel: [ 62.918407] Bluetooth: Core ver 2.22 2023-11-08T17:20:01.274334+01:00 heisenberg kernel: [ 62.919539] NET: Registered PF_BLUETOOTH protocol family 2023-11-08T17:20:01.274334+01:00 heisenberg kernel: [ 62.920630] Bluetooth: HCI device and connection manager initialized 2023-11-08T17:20:01.274336+01:00 heisenberg kernel: [ 62.921750] Bluetooth: HCI socket layer initialized 2023-11-08T17:20:01.274337+01:00 heisenberg kernel: [ 62.922831] Bluetooth: L2CAP socket layer initialized 2023-11-08T17:20:01.274337+01:00 heisenberg kernel: [ 62.923919] Bluetooth: SCO socket layer initialized 2023-11-08T17:20:01.274337+01:00 heisenberg kernel: [ 62.940503] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x370 2023-11-08T17:20:01.274338+01:00 heisenberg kernel: [ 62.941440] thermal thermal_zone4: failed to read out thermal zone (-61) 2023-11-08T17:20:01.274338+01:00 heisenberg kernel: [ 62.981399] usbcore: registered new interface driver btusb 2023-11-08T17:20:01.274340+01:00 heisenberg kernel: [ 62.982772] Bluetooth: hci0: Device revision is 0 2023-11-08T17:20:01.274341+01:00 heisenberg kernel: [ 62.982775] Bluetooth: hci0: Secure boot is enabled 2023-11-08T17:20:01.274341+01:00 heisenberg kernel: [ 62.982775] Bluetooth: hci0: OTP lock is enabled 2023-11-08T17:20:01.274341+01:00 heisenberg kernel: [ 62.982776] Bluetooth: hci0: API lock is enabled 2023-11-08T17:20:01.274342+01:00 heisenberg kernel: [ 62.982776] Bluetooth: hci0: Debug lock is disabled 2023-11-08T17:20:01.274359+01:00 heisenberg kernel: [ 62.982777] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 2023-11-08T17:20:01.274362+01:00 heisenberg kernel: [ 62.982778] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 2023-11-08T17:20:01.274362+01:00 heisenberg kernel: [ 62.989070] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0040-0041.sfi 2023-11-08T17:20:01.274362+01:00 heisenberg kernel: [ 63.003430] Bluetooth: hci0: Found device firmware: intel/ibt-0040-0041.sfi 2023-11-08T17:20:01.274363+01:00 heisenberg kernel: [ 63.004203] Bluetooth: hci0: Boot Address: 0x100800 2023-11-08T17:20:01.274363+01:00 heisenberg kernel: [ 63.005038] Bluetooth: hci0: Firmware Version: 98-13.23 2023-11-08T17:20:01.274363+01:00 heisenberg kernel: [ 63.005235] usbcore: registered new interface driver snd-usb-audio 2023-11-08T17:20:01.274363+01:00 heisenberg kernel: [ 63.038372] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 2023-11-08T17:20:01.274366+01:00 heisenberg kernel: [ 63.038477] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver 2023-11-08T17:20:01.274366+01:00 heisenberg kernel: [ 63.040326] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) 2023-11-08T17:20:01.274367+01:00 heisenberg kernel: [ 63.040541] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 2023-11-08T17:20:01.274367+01:00 heisenberg kernel: [ 63.040628] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) 2023-11-08T17:20:01.274367+01:00 heisenberg kernel: [ 63.047329] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode 2023-11-08T17:20:01.274370+01:00 heisenberg kernel: [ 63.054909] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0002/input/input13 2023-11-08T17:20:01.274370+01:00 heisenberg kernel: [ 63.054965] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0002/input/input15 2023-11-08T17:20:01.274370+01:00 heisenberg kernel: [ 63.055008] hid-multitouch 0018:04F3:31B0.0002: input,hidraw1: I2C HID v1.00 Mouse [0X45 0X4C 0X41 0X4E 04F3:31B0] on i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00 2023-11-08T17:20:01.274371+01:00 heisenberg kernel: [ 63.077793] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 2023-11-08T17:20:01.274371+01:00 heisenberg kernel: [ 63.078451] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now 2023-11-08T17:20:01.274371+01:00 heisenberg kernel: [ 63.079106] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 2023-11-08T17:20:01.274374+01:00 heisenberg kernel: [ 63.080709] sof-audio-pci-intel-tgl 0000:00:1f.3: firmware: direct-loading firmware intel/sof/sof-adl.ri 2023-11-08T17:20:01.274374+01:00 heisenberg kernel: [ 63.083008] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 2023-11-08T17:20:01.274374+01:00 heisenberg kernel: [ 63.083546] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 2023-11-08T17:20:01.274375+01:00 heisenberg kernel: [ 63.084083] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 2023-11-08T17:20:01.274375+01:00 heisenberg kernel: [ 63.116364] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f 2023-11-08T17:20:01.274375+01:00 heisenberg kernel: [ 63.117262] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f 2023-11-08T17:20:01.274378+01:00 heisenberg kernel: [ 63.118052] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80 2023-11-08T17:20:01.274378+01:00 heisenberg kernel: [ 63.118741] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 2023-11-08T17:20:01.274378+01:00 heisenberg kernel: [ 63.120354] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-so-a0-gf-a0.pnvm 2023-11-08T17:20:01.274379+01:00 heisenberg kernel: [ 63.121245] iwlwifi 0000:00:14.3: loaded PNVM version e4a49534 2023-11-08T17:20:01.274379+01:00 heisenberg kernel: [ 63.137558] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000 2023-11-08T17:20:01.274380+01:00 heisenberg kernel: [ 63.181418] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 2023-11-08T17:20:01.274383+01:00 heisenberg kernel: [ 63.182547] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 2023-11-08T17:20:01.274383+01:00 heisenberg kernel: [ 63.190717] sof-audio-pci-intel-tgl 0000:00:1f.3: firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg 2023-11-08T17:20:01.274383+01:00 heisenberg kernel: [ 63.191525] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 2023-11-08T17:20:01.274384+01:00 heisenberg kernel: [ 63.192340] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred 2023-11-08T17:20:01.274384+01:00 heisenberg kernel: [ 63.207997] iwlwifi 0000:00:14.3: base HW address: 7c:b5:66:f7:a8:a5 2023-11-08T17:20:01.274384+01:00 heisenberg kernel: [ 63.215885] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker 2023-11-08T17:20:01.274387+01:00 heisenberg kernel: [ 63.216986] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 2023-11-08T17:20:01.274387+01:00 heisenberg kernel: [ 63.218103] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) 2023-11-08T17:20:01.274387+01:00 heisenberg kernel: [ 63.218675] typec port0: bound usb4-port1 (ops connector_ops [usbcore]) 2023-11-08T17:20:01.274388+01:00 heisenberg kernel: [ 63.219226] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 2023-11-08T17:20:01.274388+01:00 heisenberg kernel: [ 63.219227] snd_hda_codec_realtek ehdaudio0D0: inputs: 2023-11-08T17:20:01.274388+01:00 heisenberg kernel: [ 63.221852] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 2023-11-08T17:20:01.274391+01:00 heisenberg kernel: [ 63.283903] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten 2023-11-08T17:20:01.274391+01:00 heisenberg kernel: [ 63.283908] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten 2023-11-08T17:20:01.274391+01:00 heisenberg kernel: [ 63.284010] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten 2023-11-08T17:20:01.274392+01:00 heisenberg kernel: [ 63.284013] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten 2023-11-08T17:20:01.274392+01:00 heisenberg kernel: [ 63.284016] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten 2023-11-08T17:20:01.274392+01:00 heisenberg kernel: [ 63.284018] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten 2023-11-08T17:20:01.274395+01:00 heisenberg kernel: [ 63.284020] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten 2023-11-08T17:20:01.274395+01:00 heisenberg kernel: [ 63.284024] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten 2023-11-08T17:20:01.274396+01:00 heisenberg kernel: [ 63.284027] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten 2023-11-08T17:20:01.274396+01:00 heisenberg kernel: [ 63.284031] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten 2023-11-08T17:20:01.274396+01:00 heisenberg kernel: [ 63.284036] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten 2023-11-08T17:20:01.274397+01:00 heisenberg kernel: [ 63.284039] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten 2023-11-08T17:20:01.274400+01:00 heisenberg kernel: [ 63.284043] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten 2023-11-08T17:20:01.274401+01:00 heisenberg kernel: [ 63.284052] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 2023-11-08T17:20:01.274401+01:00 heisenberg kernel: [ 63.304042] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input16 2023-11-08T17:20:01.274401+01:00 heisenberg kernel: [ 63.304136] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input17 2023-11-08T17:20:01.274402+01:00 heisenberg kernel: [ 63.304177] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input18 2023-11-08T17:20:01.274404+01:00 heisenberg kernel: [ 63.304201] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input19 2023-11-08T17:20:01.274404+01:00 heisenberg kernel: [ 63.306282] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input20 2023-11-08T17:20:01.306782+01:00 heisenberg kernel: [ 63.452040] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:20:01.306787+01:00 heisenberg kernel: [ 63.453810] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:20:01.306788+01:00 heisenberg kernel: [ 63.454381] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:20:01.306788+01:00 heisenberg kernel: [ 63.454924] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:20:01.814804+01:00 heisenberg kernel: [ 63.963729] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f 2023-11-08T17:20:01.814811+01:00 heisenberg kernel: [ 63.964424] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f 2023-11-08T17:20:01.814813+01:00 heisenberg kernel: [ 63.965070] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80 2023-11-08T17:20:01.819024+01:00 heisenberg kernel: [ 63.965741] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 2023-11-08T17:20:01.910865+01:00 heisenberg kernel: [ 64.059753] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 2 2023-11-08T17:20:02.134947+01:00 heisenberg kernel: [ 64.282006] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f 2023-11-08T17:20:02.134958+01:00 heisenberg kernel: [ 64.282571] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f 2023-11-08T17:20:02.134958+01:00 heisenberg kernel: [ 64.283158] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80 2023-11-08T17:20:02.134959+01:00 heisenberg kernel: [ 64.283733] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 2023-11-08T17:20:02.458839+01:00 heisenberg kernel: [ 64.606579] Bluetooth: hci0: Waiting for firmware download to complete 2023-11-08T17:20:02.458853+01:00 heisenberg kernel: [ 64.606749] Bluetooth: hci0: Firmware loaded in 1565009 usecs 2023-11-08T17:20:02.458854+01:00 heisenberg kernel: [ 64.606902] Bluetooth: hci0: Waiting for device to boot 2023-11-08T17:20:02.474839+01:00 heisenberg kernel: [ 64.623885] Bluetooth: hci0: Device booted in 16714 usecs 2023-11-08T17:20:02.474853+01:00 heisenberg kernel: [ 64.624304] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0040-0041.ddc 2023-11-08T17:20:02.474854+01:00 heisenberg kernel: [ 64.624331] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0040-0041.ddc 2023-11-08T17:20:02.478917+01:00 heisenberg kernel: [ 64.626969] Bluetooth: hci0: Applying Intel DDC parameters completed 2023-11-08T17:20:02.482883+01:00 heisenberg kernel: [ 64.629917] Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562 2023-11-08T17:20:03.818768+01:00 heisenberg kernel: [ 65.968167] pipewire[4138]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set 2023-11-08T17:20:03.930770+01:00 heisenberg kernel: [ 66.080446] typec port1: bound usb4-port2 (ops connector_ops [usbcore]) 2023-11-08T17:20:04.931069+01:00 heisenberg kernel: [ 67.078371] wlan0: authenticate with 50:e6:36:3c:99:36 2023-11-08T17:20:04.938844+01:00 heisenberg kernel: [ 67.088742] wlan0: send auth to 50:e6:36:3c:99:36 (try 1/3) 2023-11-08T17:20:05.511076+01:00 heisenberg kernel: [ 67.658678] wlan0: authenticate with 50:e6:36:3c:99:36 2023-11-08T17:20:05.511098+01:00 heisenberg kernel: [ 67.659895] wlan0: send auth to 50:e6:36:3c:99:36 (try 1/3) 2023-11-08T17:20:05.654994+01:00 heisenberg kernel: [ 67.801347] wlan0: authenticated 2023-11-08T17:20:05.655017+01:00 heisenberg kernel: [ 67.805313] wlan0: associate with 50:e6:36:3c:99:36 (try 1/3) 2023-11-08T17:20:05.658924+01:00 heisenberg kernel: [ 67.808083] wlan0: RX AssocResp from 50:e6:36:3c:99:36 (capab=0x1511 status=0 aid=1) 2023-11-08T17:20:05.663485+01:00 heisenberg kernel: [ 67.813392] wlan0: associated 2023-11-08T17:20:05.670852+01:00 heisenberg kernel: [ 67.819750] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 50:e6:36:3c:99:36 2023-11-08T17:20:05.694843+01:00 heisenberg kernel: [ 67.843499] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.694858+01:00 heisenberg kernel: [ 67.843889] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.694859+01:00 heisenberg kernel: [ 67.844299] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.694860+01:00 heisenberg kernel: [ 67.844771] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.694860+01:00 heisenberg kernel: [ 67.845051] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.698856+01:00 heisenberg kernel: [ 67.845541] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.698869+01:00 heisenberg kernel: [ 67.845907] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:20:05.698870+01:00 heisenberg kernel: [ 67.846339] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:24:22.409329+01:00 heisenberg kernel: [ 325.047599] usb 4-1.4.1: new SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:24:22.437055+01:00 heisenberg kernel: [ 325.076143] usb 4-1.4.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:24:22.437073+01:00 heisenberg kernel: [ 325.076160] usb 4-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:24:22.437075+01:00 heisenberg kernel: [ 325.076165] usb 4-1.4.1: Product: HDD Enclosure 2023-11-08T17:24:22.437075+01:00 heisenberg kernel: [ 325.076168] usb 4-1.4.1: Manufacturer: Inateck Technology Inc 2023-11-08T17:24:22.437076+01:00 heisenberg kernel: [ 325.076171] usb 4-1.4.1: SerialNumber: ABCDEFA74566 2023-11-08T17:24:22.437077+01:00 heisenberg kernel: [ 325.077023] usb 4-1.4.1: Device is not authorized for usage 2023-11-08T17:24:25.825070+01:00 heisenberg kernel: [ 328.463691] usb 4-1.4.1: authorized to connect 2023-11-08T17:24:25.841049+01:00 heisenberg kernel: [ 328.483079] scsi host0: uas 2023-11-08T17:24:25.841063+01:00 heisenberg kernel: [ 328.483159] usbcore: registered new interface driver uas 2023-11-08T17:24:25.905202+01:00 heisenberg kernel: [ 328.546568] scsi 0:0:0:0: Direct-Access ST20000N M007D-3DJ103 SN03 PQ: 0 ANSI: 6 2023-11-08T17:24:25.909092+01:00 heisenberg kernel: [ 328.551280] sd 0:0:0:0: [sda] 39063650304 512-byte logical blocks: (20.0 TB/18.2 TiB) 2023-11-08T17:24:25.909130+01:00 heisenberg kernel: [ 328.551294] sd 0:0:0:0: [sda] 4096-byte physical blocks 2023-11-08T17:24:25.913129+01:00 heisenberg kernel: [ 328.551537] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:24:25.913157+01:00 heisenberg kernel: [ 328.551543] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 2023-11-08T17:24:25.913158+01:00 heisenberg kernel: [ 328.551838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T17:24:25.913163+01:00 heisenberg kernel: [ 328.551998] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes 2023-11-08T17:24:25.913164+01:00 heisenberg kernel: [ 328.552003] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) 2023-11-08T17:24:25.953142+01:00 heisenberg kernel: [ 328.593525] sda: sda1 sda2 2023-11-08T17:24:25.953164+01:00 heisenberg kernel: [ 328.593887] sd 0:0:0:0: [sda] Attached SCSI disk 2023-11-08T17:24:25.973007+01:00 heisenberg kernel: [ 328.613035] sd 0:0:0:0: Attached scsi generic sg0 type 0 2023-11-08T17:24:26.201091+01:00 heisenberg kernel: [ 328.843293] BTRFS: device label data-int-b-1-meta devid 1 transid 12 /dev/sda2 scanned by (udev-worker) (5873) 2023-11-08T17:24:39.145283+01:00 heisenberg kernel: [ 341.783740] usb 4-1.4.2: new SuperSpeed Plus Gen 2x1 USB device number 7 using xhci_hcd 2023-11-08T17:24:39.173052+01:00 heisenberg kernel: [ 341.812282] usb 4-1.4.2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:24:39.173067+01:00 heisenberg kernel: [ 341.812295] usb 4-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:24:39.173068+01:00 heisenberg kernel: [ 341.812299] usb 4-1.4.2: Product: HDD Enclosure 2023-11-08T17:24:39.173069+01:00 heisenberg kernel: [ 341.812302] usb 4-1.4.2: Manufacturer: Inateck Technology Inc 2023-11-08T17:24:39.173071+01:00 heisenberg kernel: [ 341.812305] usb 4-1.4.2: SerialNumber: ABCDEFA74566 2023-11-08T17:24:39.173072+01:00 heisenberg kernel: [ 341.812653] usb 4-1.4.2: Device is not authorized for usage 2023-11-08T17:24:41.481005+01:00 heisenberg kernel: [ 344.122077] scsi host1: uas 2023-11-08T17:24:41.481025+01:00 heisenberg kernel: [ 344.122263] usb 4-1.4.2: authorized to connect 2023-11-08T17:24:41.540982+01:00 heisenberg kernel: [ 344.180282] scsi 1:0:0:0: Direct-Access ST20000N M007D-3DJ103 SN03 PQ: 0 ANSI: 6 2023-11-08T17:24:41.544972+01:00 heisenberg kernel: [ 344.183715] sd 1:0:0:0: Attached scsi generic sg1 type 0 2023-11-08T17:24:41.544979+01:00 heisenberg kernel: [ 344.183961] sd 1:0:0:0: [sdb] 39063650304 512-byte logical blocks: (20.0 TB/18.2 TiB) 2023-11-08T17:24:41.544980+01:00 heisenberg kernel: [ 344.183967] sd 1:0:0:0: [sdb] 4096-byte physical blocks 2023-11-08T17:24:41.544983+01:00 heisenberg kernel: [ 344.184098] sd 1:0:0:0: [sdb] Write Protect is off 2023-11-08T17:24:41.544983+01:00 heisenberg kernel: [ 344.184100] sd 1:0:0:0: [sdb] Mode Sense: 2f 00 00 00 2023-11-08T17:24:41.544984+01:00 heisenberg kernel: [ 344.184401] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T17:24:41.544984+01:00 heisenberg kernel: [ 344.184565] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes 2023-11-08T17:24:41.544985+01:00 heisenberg kernel: [ 344.184567] sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) 2023-11-08T17:24:41.625144+01:00 heisenberg kernel: [ 344.267034] sdb: sdb1 sdb2 2023-11-08T17:24:41.625176+01:00 heisenberg kernel: [ 344.267575] sd 1:0:0:0: [sdb] Attached SCSI disk 2023-11-08T17:24:41.833000+01:00 heisenberg kernel: [ 344.473194] BTRFS: device label data-b-1-meta devid 1 transid 10 /dev/sdb2 scanned by (udev-worker) (5918) 2023-11-08T17:27:04.953126+01:00 heisenberg kernel: [ 487.592789] BTRFS: device label data-int-b-1 devid 1 transid 1614 /dev/dm-1 scanned by (udev-worker) (9087) 2023-11-08T17:27:14.721106+01:00 heisenberg kernel: [ 497.361218] BTRFS: device label data-b-1 devid 1 transid 18 /dev/dm-2 scanned by (udev-worker) (9519) 2023-11-08T17:27:25.017003+01:00 heisenberg kernel: [ 507.658383] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:27:25.017030+01:00 heisenberg kernel: [ 507.658404] BTRFS info (device dm-1): using free space tree 2023-11-08T17:27:29.945033+01:00 heisenberg kernel: [ 512.585693] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:27:29.945051+01:00 heisenberg kernel: [ 512.585712] BTRFS info (device dm-2): using free space tree 2023-11-08T17:30:08.185075+01:00 heisenberg kernel: [ 670.825988] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN 2023-11-08T17:30:08.185097+01:00 heisenberg kernel: [ 670.826005] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:30:08.185098+01:00 heisenberg kernel: [ 670.826218] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 2023-11-08T17:30:08.185099+01:00 heisenberg kernel: [ 670.826236] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:30:08.185100+01:00 heisenberg kernel: [ 670.826405] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2023-11-08T17:30:08.185102+01:00 heisenberg kernel: [ 670.826418] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:30:08.185103+01:00 heisenberg kernel: [ 670.826576] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN 2023-11-08T17:30:08.185104+01:00 heisenberg kernel: [ 670.826587] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:30:08.185104+01:00 heisenberg kernel: [ 670.826721] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN 2023-11-08T17:30:08.185105+01:00 heisenberg kernel: [ 670.826732] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:30:08.185106+01:00 heisenberg kernel: [ 670.826859] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 2023-11-08T17:30:08.185106+01:00 heisenberg kernel: [ 670.826869] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:30:08.201123+01:00 heisenberg kernel: [ 670.841837] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:30:08.201143+01:00 heisenberg kernel: [ 670.841907] usb 4-1.4.1: cmd cmplt err -2 2023-11-08T17:30:08.201144+01:00 heisenberg kernel: [ 670.841958] usb 4-1.4.1: cmd cmplt err -2 2023-11-08T17:30:08.281288+01:00 heisenberg kernel: [ 670.922669] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:30:08.305149+01:00 heisenberg kernel: [ 670.949191] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:30:38.901160+01:00 heisenberg kernel: [ 701.542209] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:30:38.901184+01:00 heisenberg kernel: [ 701.544524] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:30:38.901185+01:00 heisenberg kernel: [ 701.544536] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:30:38.901186+01:00 heisenberg kernel: [ 701.544541] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:30:38.901190+01:00 heisenberg kernel: [ 701.544545] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:30:38.901190+01:00 heisenberg kernel: [ 701.544548] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:30:38.901191+01:00 heisenberg kernel: [ 701.544550] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:30:38.901192+01:00 heisenberg kernel: [ 701.544554] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:30:38.901193+01:00 heisenberg kernel: [ 701.544556] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:30:38.901193+01:00 heisenberg kernel: [ 701.544560] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:30:38.901194+01:00 heisenberg kernel: [ 701.544562] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:30:38.901195+01:00 heisenberg kernel: [ 701.544565] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:30:38.901196+01:00 heisenberg kernel: [ 701.544568] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:30:38.981268+01:00 heisenberg kernel: [ 701.622672] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:30:39.005123+01:00 heisenberg kernel: [ 701.648865] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:31:09.617177+01:00 heisenberg kernel: [ 732.258505] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:31:09.617201+01:00 heisenberg kernel: [ 732.259767] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:31:09.617203+01:00 heisenberg kernel: [ 732.259786] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:31:09.617204+01:00 heisenberg kernel: [ 732.259793] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:31:09.617204+01:00 heisenberg kernel: [ 732.259797] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:31:09.617205+01:00 heisenberg kernel: [ 732.259801] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:31:09.617206+01:00 heisenberg kernel: [ 732.259805] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:31:09.617207+01:00 heisenberg kernel: [ 732.259809] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:31:09.617209+01:00 heisenberg kernel: [ 732.259812] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:31:09.617210+01:00 heisenberg kernel: [ 732.259817] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:31:09.617211+01:00 heisenberg kernel: [ 732.259820] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:31:09.617211+01:00 heisenberg kernel: [ 732.259824] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:31:09.617212+01:00 heisenberg kernel: [ 732.259827] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:31:09.697302+01:00 heisenberg kernel: [ 732.338958] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:31:09.721142+01:00 heisenberg kernel: [ 732.365178] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:31:40.337185+01:00 heisenberg kernel: [ 762.978683] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:31:40.337209+01:00 heisenberg kernel: [ 762.979877] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:31:40.337211+01:00 heisenberg kernel: [ 762.979890] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:31:40.337212+01:00 heisenberg kernel: [ 762.979898] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:31:40.337213+01:00 heisenberg kernel: [ 762.979903] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:31:40.337213+01:00 heisenberg kernel: [ 762.979908] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:31:40.337214+01:00 heisenberg kernel: [ 762.979912] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:31:40.337215+01:00 heisenberg kernel: [ 762.979917] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:31:40.337217+01:00 heisenberg kernel: [ 762.979920] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:31:40.337217+01:00 heisenberg kernel: [ 762.979924] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:31:40.337218+01:00 heisenberg kernel: [ 762.979928] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:31:40.337219+01:00 heisenberg kernel: [ 762.979932] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:31:40.337219+01:00 heisenberg kernel: [ 762.979936] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:31:40.625139+01:00 heisenberg kernel: [ 763.267195] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:31:40.649159+01:00 heisenberg kernel: [ 763.293283] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:32:11.069181+01:00 heisenberg kernel: [ 793.711001] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:32:11.069220+01:00 heisenberg kernel: [ 793.711805] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:32:11.069222+01:00 heisenberg kernel: [ 793.711815] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:32:11.069224+01:00 heisenberg kernel: [ 793.711822] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:32:11.069225+01:00 heisenberg kernel: [ 793.711826] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:32:11.069226+01:00 heisenberg kernel: [ 793.711831] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:32:11.069227+01:00 heisenberg kernel: [ 793.711834] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:32:11.069228+01:00 heisenberg kernel: [ 793.711839] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:32:11.069231+01:00 heisenberg kernel: [ 793.711842] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:32:11.069232+01:00 heisenberg kernel: [ 793.711847] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:32:11.069234+01:00 heisenberg kernel: [ 793.711850] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:32:11.069235+01:00 heisenberg kernel: [ 793.711855] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:32:11.069236+01:00 heisenberg kernel: [ 793.711858] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:32:11.149156+01:00 heisenberg kernel: [ 793.791261] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:32:11.173173+01:00 heisenberg kernel: [ 793.816730] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:32:41.793182+01:00 heisenberg kernel: [ 824.435354] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:32:41.793219+01:00 heisenberg kernel: [ 824.436257] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:32:41.793222+01:00 heisenberg kernel: [ 824.436267] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:32:41.793223+01:00 heisenberg kernel: [ 824.436273] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:32:41.793224+01:00 heisenberg kernel: [ 824.436277] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:32:41.793225+01:00 heisenberg kernel: [ 824.436282] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:32:41.793227+01:00 heisenberg kernel: [ 824.436285] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:32:41.793228+01:00 heisenberg kernel: [ 824.436290] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:32:41.793230+01:00 heisenberg kernel: [ 824.436293] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:32:41.793231+01:00 heisenberg kernel: [ 824.436297] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:32:41.793232+01:00 heisenberg kernel: [ 824.436301] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:32:41.793233+01:00 heisenberg kernel: [ 824.436306] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:32:41.793235+01:00 heisenberg kernel: [ 824.436309] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:32:41.873153+01:00 heisenberg kernel: [ 824.515874] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:32:41.897164+01:00 heisenberg kernel: [ 824.542001] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:32:51.985208+01:00 heisenberg kernel: [ 834.627434] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 2023-11-08T17:32:51.985235+01:00 heisenberg kernel: [ 834.627454] sd 0:0:0:0: [sda] tag#0 CDB: Test Unit Ready 00 00 00 00 00 00 2023-11-08T17:32:51.985236+01:00 heisenberg kernel: [ 834.627460] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:32:52.065175+01:00 heisenberg kernel: [ 834.708009] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd 2023-11-08T17:32:52.089077+01:00 heisenberg kernel: [ 834.733255] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:32:52.089105+01:00 heisenberg kernel: [ 834.733272] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089108+01:00 heisenberg kernel: [ 834.733286] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089109+01:00 heisenberg kernel: [ 834.733290] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089112+01:00 heisenberg kernel: [ 834.733293] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089113+01:00 heisenberg kernel: [ 834.733296] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089114+01:00 heisenberg kernel: [ 834.733299] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:32:52.089115+01:00 heisenberg kernel: [ 834.733318] sd 0:0:0:0: [sda] tag#5 timing out command, waited 180s 2023-11-08T17:32:52.089116+01:00 heisenberg kernel: [ 834.733324] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089117+01:00 heisenberg kernel: [ 834.733329] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 02 a5 08 00 00 00 04 00 00 00 2023-11-08T17:32:52.089118+01:00 heisenberg kernel: [ 834.733333] I/O error, dev sda, sector 44369920 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089119+01:00 heisenberg kernel: [ 834.733362] sd 0:0:0:0: [sda] tag#4 timing out command, waited 180s 2023-11-08T17:32:52.089120+01:00 heisenberg kernel: [ 834.733367] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089121+01:00 heisenberg kernel: [ 834.733371] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 02 a5 14 00 00 00 04 00 00 00 2023-11-08T17:32:52.089122+01:00 heisenberg kernel: [ 834.733374] I/O error, dev sda, sector 44372992 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089125+01:00 heisenberg kernel: [ 834.733391] sd 0:0:0:0: [sda] tag#3 timing out command, waited 180s 2023-11-08T17:32:52.089126+01:00 heisenberg kernel: [ 834.733395] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089128+01:00 heisenberg kernel: [ 834.733399] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 02 a5 04 00 00 00 04 00 00 00 2023-11-08T17:32:52.089129+01:00 heisenberg kernel: [ 834.733402] I/O error, dev sda, sector 44368896 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089130+01:00 heisenberg kernel: [ 834.733412] sd 0:0:0:0: [sda] tag#2 timing out command, waited 180s 2023-11-08T17:32:52.089131+01:00 heisenberg kernel: [ 834.733416] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089133+01:00 heisenberg kernel: [ 834.733419] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 02 a5 00 00 00 00 04 00 00 00 2023-11-08T17:32:52.089134+01:00 heisenberg kernel: [ 834.733422] I/O error, dev sda, sector 44367872 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089135+01:00 heisenberg kernel: [ 834.733432] sd 0:0:0:0: [sda] tag#1 timing out command, waited 180s 2023-11-08T17:32:52.089136+01:00 heisenberg kernel: [ 834.733436] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089137+01:00 heisenberg kernel: [ 834.733440] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 02 a5 0c 00 00 00 04 00 00 00 2023-11-08T17:32:52.089138+01:00 heisenberg kernel: [ 834.733442] I/O error, dev sda, sector 44370944 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089139+01:00 heisenberg kernel: [ 834.733451] sd 0:0:0:0: [sda] tag#0 timing out command, waited 180s 2023-11-08T17:32:52.089141+01:00 heisenberg kernel: [ 834.733455] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=195s 2023-11-08T17:32:52.089142+01:00 heisenberg kernel: [ 834.733459] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 02 a5 10 00 00 00 04 00 00 00 2023-11-08T17:32:52.089143+01:00 heisenberg kernel: [ 834.733461] I/O error, dev sda, sector 44371968 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089144+01:00 heisenberg kernel: [ 834.733474] sd 0:0:0:0: rejecting I/O to offline device 2023-11-08T17:32:52.089146+01:00 heisenberg kernel: [ 834.733479] I/O error, dev sda, sector 44374016 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089148+01:00 heisenberg kernel: [ 834.733495] I/O error, dev sda, sector 44377088 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089149+01:00 heisenberg kernel: [ 834.733491] I/O error, dev sda, sector 44375040 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089151+01:00 heisenberg kernel: [ 834.733503] I/O error, dev sda, sector 44378112 op 0x0:(READ) flags 0x80700 phys_seg 128 prio class 2 2023-11-08T17:32:52.089152+01:00 heisenberg kernel: [ 834.733615] Buffer I/O error on dev dm-1, logical block 0, async page read 2023-11-08T17:35:08.885085+01:00 heisenberg kernel: [ 971.531055] usb 4-1.4.1: USB disconnect, device number 6 2023-11-08T17:35:08.945149+01:00 heisenberg kernel: [ 971.589009] sd 0:0:0:0: [sda] Synchronizing SCSI cache 2023-11-08T17:35:09.185180+01:00 heisenberg kernel: [ 971.829080] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK 2023-11-08T17:35:54.805296+01:00 heisenberg kernel: [ 1017.449550] usb 4-1.2: new SuperSpeed Plus Gen 2x1 USB device number 8 using xhci_hcd 2023-11-08T17:35:54.833087+01:00 heisenberg kernel: [ 1017.477474] usb 4-1.2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:35:54.833112+01:00 heisenberg kernel: [ 1017.477492] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:35:54.833114+01:00 heisenberg kernel: [ 1017.477496] usb 4-1.2: Product: HDD Enclosure 2023-11-08T17:35:54.833116+01:00 heisenberg kernel: [ 1017.477500] usb 4-1.2: Manufacturer: Inateck Technology Inc 2023-11-08T17:35:54.833121+01:00 heisenberg kernel: [ 1017.477503] usb 4-1.2: SerialNumber: ABCDEFA74566 2023-11-08T17:35:54.833122+01:00 heisenberg kernel: [ 1017.477835] usb 4-1.2: Device is not authorized for usage 2023-11-08T17:35:59.357052+01:00 heisenberg kernel: [ 1022.002992] scsi host0: uas 2023-11-08T17:35:59.357078+01:00 heisenberg kernel: [ 1022.003152] usb 4-1.2: authorized to connect 2023-11-08T17:35:59.416983+01:00 heisenberg kernel: [ 1022.062983] scsi 0:0:0:0: Direct-Access ST20000N M007D-3DJ103 SN03 PQ: 0 ANSI: 6 2023-11-08T17:35:59.420982+01:00 heisenberg kernel: [ 1022.066007] sd 0:0:0:0: Attached scsi generic sg0 type 0 2023-11-08T17:35:59.420993+01:00 heisenberg kernel: [ 1022.066224] sd 0:0:0:0: [sda] 39063650304 512-byte logical blocks: (20.0 TB/18.2 TiB) 2023-11-08T17:35:59.420994+01:00 heisenberg kernel: [ 1022.066230] sd 0:0:0:0: [sda] 4096-byte physical blocks 2023-11-08T17:35:59.420996+01:00 heisenberg kernel: [ 1022.066362] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:35:59.420996+01:00 heisenberg kernel: [ 1022.066365] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 2023-11-08T17:35:59.420997+01:00 heisenberg kernel: [ 1022.066708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T17:35:59.420997+01:00 heisenberg kernel: [ 1022.066876] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes 2023-11-08T17:35:59.420997+01:00 heisenberg kernel: [ 1022.066878] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) 2023-11-08T17:35:59.465239+01:00 heisenberg kernel: [ 1022.110456] sda: sda1 sda2 2023-11-08T17:35:59.465249+01:00 heisenberg kernel: [ 1022.110883] sd 0:0:0:0: [sda] Attached SCSI disk 2023-11-08T17:38:14.281205+01:00 heisenberg kernel: [ 1156.926679] BTRFS: device label data-int-b-1 devid 1 transid 1614 /dev/dm-1 scanned by (udev-worker) (11959) 2023-11-08T17:38:21.041082+01:00 heisenberg kernel: [ 1163.689562] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:38:21.041105+01:00 heisenberg kernel: [ 1163.689579] BTRFS info (device dm-1): using free space tree 2023-11-08T17:39:39.569048+01:00 heisenberg kernel: [ 1242.215508] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN 2023-11-08T17:39:39.569076+01:00 heisenberg kernel: [ 1242.215520] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 01 5f 41 20 00 00 04 00 00 00 2023-11-08T17:39:39.569078+01:00 heisenberg kernel: [ 1242.215761] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN 2023-11-08T17:39:39.569078+01:00 heisenberg kernel: [ 1242.215774] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 01 5f 4d 20 00 00 04 00 00 00 2023-11-08T17:39:39.569079+01:00 heisenberg kernel: [ 1242.215928] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 2023-11-08T17:39:39.569080+01:00 heisenberg kernel: [ 1242.215940] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 01 5f 49 20 00 00 04 00 00 00 2023-11-08T17:39:39.569081+01:00 heisenberg kernel: [ 1242.216083] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 2023-11-08T17:39:39.569081+01:00 heisenberg kernel: [ 1242.216094] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 01 5f 45 20 00 00 04 00 00 00 2023-11-08T17:39:39.569082+01:00 heisenberg kernel: [ 1242.216233] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2023-11-08T17:39:39.569084+01:00 heisenberg kernel: [ 1242.216241] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 01 5f 3d 20 00 00 04 00 00 00 2023-11-08T17:39:39.569084+01:00 heisenberg kernel: [ 1242.216374] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN 2023-11-08T17:39:39.569085+01:00 heisenberg kernel: [ 1242.216382] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 01 5f 51 20 00 00 04 00 00 00 2023-11-08T17:39:39.589125+01:00 heisenberg kernel: [ 1242.235559] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:39:39.589153+01:00 heisenberg kernel: [ 1242.235621] usb 4-1.2: cmd cmplt err -2 2023-11-08T17:39:39.669024+01:00 heisenberg kernel: [ 1242.315875] usb 4-1.2: reset SuperSpeed Plus Gen 2x1 USB device number 8 using xhci_hcd 2023-11-08T17:39:39.693038+01:00 heisenberg kernel: [ 1242.342328] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:40:10.301145+01:00 heisenberg kernel: [ 1272.947749] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:40:10.301181+01:00 heisenberg kernel: [ 1272.947805] usb 4-1.2: cmd cmplt err -2 2023-11-08T17:40:10.301184+01:00 heisenberg kernel: [ 1272.947831] usb 4-1.2: cmd cmplt err -2 2023-11-08T17:40:10.301185+01:00 heisenberg kernel: [ 1272.947888] usb 4-1.2: cmd cmplt err -2 2023-11-08T17:40:10.301187+01:00 heisenberg kernel: [ 1272.947923] usb 4-1.2: cmd cmplt err -2 2023-11-08T17:40:10.301188+01:00 heisenberg kernel: [ 1272.948922] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:40:10.301190+01:00 heisenberg kernel: [ 1272.948938] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 01 5f 41 20 00 00 04 00 00 00 2023-11-08T17:40:10.301194+01:00 heisenberg kernel: [ 1272.948945] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:40:10.301195+01:00 heisenberg kernel: [ 1272.948949] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 01 5f 4d 20 00 00 04 00 00 00 2023-11-08T17:40:10.301196+01:00 heisenberg kernel: [ 1272.948954] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:40:10.301197+01:00 heisenberg kernel: [ 1272.948958] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 01 5f 49 20 00 00 04 00 00 00 2023-11-08T17:40:10.301199+01:00 heisenberg kernel: [ 1272.948962] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:40:10.301200+01:00 heisenberg kernel: [ 1272.948966] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 01 5f 45 20 00 00 04 00 00 00 2023-11-08T17:40:10.301201+01:00 heisenberg kernel: [ 1272.948970] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:40:10.301202+01:00 heisenberg kernel: [ 1272.948974] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 01 5f 3d 20 00 00 04 00 00 00 2023-11-08T17:40:10.301204+01:00 heisenberg kernel: [ 1272.948978] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:40:10.301206+01:00 heisenberg kernel: [ 1272.948982] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 01 5f 51 20 00 00 04 00 00 00 2023-11-08T17:40:15.633218+01:00 heisenberg kernel: [ 1278.279901] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:21.009221+01:00 heisenberg kernel: [ 1283.655964] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:21.217141+01:00 heisenberg kernel: [ 1283.863870] usb 4-1.2: device not accepting address 8, error -62 2023-11-08T17:40:26.641178+01:00 heisenberg kernel: [ 1289.288086] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:32.017237+01:00 heisenberg kernel: [ 1294.664116] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:32.225211+01:00 heisenberg kernel: [ 1294.872042] usb 4-1.2: device not accepting address 8, error -62 2023-11-08T17:40:37.649074+01:00 heisenberg kernel: [ 1300.296027] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:43.025110+01:00 heisenberg kernel: [ 1305.672122] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:43.233276+01:00 heisenberg kernel: [ 1305.880220] usb 4-1.2: device not accepting address 8, error -62 2023-11-08T17:40:48.657336+01:00 heisenberg kernel: [ 1311.304448] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:54.033221+01:00 heisenberg kernel: [ 1316.680424] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:40:54.241040+01:00 heisenberg kernel: [ 1316.888160] usb 4-1.2: device not accepting address 8, error -62 2023-11-08T17:40:54.241061+01:00 heisenberg kernel: [ 1316.888592] scsi host0: uas_eh_device_reset_handler FAILED err -19 2023-11-08T17:40:54.241063+01:00 heisenberg kernel: [ 1316.888611] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:40:54.241064+01:00 heisenberg kernel: [ 1316.888632] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:40:54.241065+01:00 heisenberg kernel: [ 1316.888636] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:40:54.241069+01:00 heisenberg kernel: [ 1316.888638] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:40:54.241069+01:00 heisenberg kernel: [ 1316.888641] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:40:54.241070+01:00 heisenberg kernel: [ 1316.888643] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:40:54.241071+01:00 heisenberg kernel: [ 1316.888690] usb 4-1.2: USB disconnect, device number 8 2023-11-08T17:40:54.337165+01:00 heisenberg kernel: [ 1316.984212] sd 0:0:0:0: [sda] Synchronizing SCSI cache 2023-11-08T17:40:54.581040+01:00 heisenberg kernel: [ 1317.228242] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK 2023-11-08T17:40:59.921334+01:00 heisenberg kernel: [ 1322.568358] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:05.297279+01:00 heisenberg kernel: [ 1327.944271] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:05.505157+01:00 heisenberg kernel: [ 1328.152317] usb 4-1.2: device not accepting address 9, error -62 2023-11-08T17:41:10.929344+01:00 heisenberg kernel: [ 1333.576462] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:16.305330+01:00 heisenberg kernel: [ 1338.952446] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:16.513110+01:00 heisenberg kernel: [ 1339.160193] usb 4-1.2: device not accepting address 10, error -62 2023-11-08T17:41:16.513120+01:00 heisenberg kernel: [ 1339.160255] usb 4-1-port2: attempt power cycle 2023-11-08T17:41:22.961350+01:00 heisenberg kernel: [ 1345.608524] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:28.341181+01:00 heisenberg kernel: [ 1350.988339] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:28.549121+01:00 heisenberg kernel: [ 1351.196444] usb 4-1.2: device not accepting address 11, error -62 2023-11-08T17:41:33.969328+01:00 heisenberg kernel: [ 1356.616596] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:39.345303+01:00 heisenberg kernel: [ 1361.992580] xhci_hcd 0000:00:0d.0: Timeout while waiting for setup device command 2023-11-08T17:41:39.553277+01:00 heisenberg kernel: [ 1362.200547] usb 4-1.2: device not accepting address 12, error -62 2023-11-08T17:41:39.553306+01:00 heisenberg kernel: [ 1362.200853] usb 4-1-port2: unable to enumerate USB device 2023-11-08T17:41:51.377289+01:00 heisenberg kernel: [ 1374.024654] usb 4-1.2: new SuperSpeed Plus Gen 2x1 USB device number 13 using xhci_hcd 2023-11-08T17:41:51.405005+01:00 heisenberg kernel: [ 1374.053969] usb 4-1.2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:41:51.405024+01:00 heisenberg kernel: [ 1374.053984] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:41:51.405026+01:00 heisenberg kernel: [ 1374.053987] usb 4-1.2: Product: HDD Enclosure 2023-11-08T17:41:51.405029+01:00 heisenberg kernel: [ 1374.053990] usb 4-1.2: Manufacturer: Inateck Technology Inc 2023-11-08T17:41:51.405030+01:00 heisenberg kernel: [ 1374.053992] usb 4-1.2: SerialNumber: ABCDEFA74566 2023-11-08T17:41:51.405031+01:00 heisenberg kernel: [ 1374.054392] usb 4-1.2: Device is not authorized for usage 2023-11-08T17:41:59.601093+01:00 heisenberg kernel: [ 1382.250997] usb 4-1.2: USB disconnect, device number 13 2023-11-08T17:44:00.961308+01:00 heisenberg kernel: [ 1503.609599] usb 4-1.4.1: new SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:44:00.989134+01:00 heisenberg kernel: [ 1503.637797] usb 4-1.4.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:44:00.989145+01:00 heisenberg kernel: [ 1503.637810] usb 4-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:44:00.989147+01:00 heisenberg kernel: [ 1503.637813] usb 4-1.4.1: Product: HDD Enclosure 2023-11-08T17:44:00.989150+01:00 heisenberg kernel: [ 1503.637816] usb 4-1.4.1: Manufacturer: Inateck Technology Inc 2023-11-08T17:44:00.989150+01:00 heisenberg kernel: [ 1503.637818] usb 4-1.4.1: SerialNumber: ABCDEFA74566 2023-11-08T17:44:00.989151+01:00 heisenberg kernel: [ 1503.638127] usb 4-1.4.1: Device is not authorized for usage 2023-11-08T17:44:04.941047+01:00 heisenberg kernel: [ 1507.592647] scsi host0: uas 2023-11-08T17:44:04.941061+01:00 heisenberg kernel: [ 1507.592833] usb 4-1.4.1: authorized to connect 2023-11-08T17:44:05.005030+01:00 heisenberg kernel: [ 1507.657100] scsi 0:0:0:0: Direct-Access ST20000N M007D-3DJ103 SN03 PQ: 0 ANSI: 6 2023-11-08T17:44:05.009028+01:00 heisenberg kernel: [ 1507.661043] sd 0:0:0:0: Attached scsi generic sg0 type 0 2023-11-08T17:44:05.009037+01:00 heisenberg kernel: [ 1507.661347] sd 0:0:0:0: [sda] 39063650304 512-byte logical blocks: (20.0 TB/18.2 TiB) 2023-11-08T17:44:05.009039+01:00 heisenberg kernel: [ 1507.661351] sd 0:0:0:0: [sda] 4096-byte physical blocks 2023-11-08T17:44:05.013039+01:00 heisenberg kernel: [ 1507.661638] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:44:05.013049+01:00 heisenberg kernel: [ 1507.661641] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 2023-11-08T17:44:05.013049+01:00 heisenberg kernel: [ 1507.661869] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T17:44:05.013050+01:00 heisenberg kernel: [ 1507.662035] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes 2023-11-08T17:44:05.013050+01:00 heisenberg kernel: [ 1507.662036] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) 2023-11-08T17:44:05.053143+01:00 heisenberg kernel: [ 1507.704314] sda: sda1 sda2 2023-11-08T17:44:05.053156+01:00 heisenberg kernel: [ 1507.704599] sd 0:0:0:0: [sda] Attached SCSI disk 2023-11-08T17:45:14.477054+01:00 heisenberg kernel: [ 1577.126439] BTRFS: device label data-int-b-1 devid 1 transid 1614 /dev/dm-1 scanned by (udev-worker) (14095) 2023-11-08T17:45:20.428981+01:00 heisenberg kernel: [ 1583.080652] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:45:20.428995+01:00 heisenberg kernel: [ 1583.080662] BTRFS info (device dm-1): using free space tree 2023-11-08T17:49:47.821118+01:00 heisenberg kernel: [ 1850.472389] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN 2023-11-08T17:49:47.821137+01:00 heisenberg kernel: [ 1850.472401] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:49:47.821139+01:00 heisenberg kernel: [ 1850.472588] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN 2023-11-08T17:49:47.821139+01:00 heisenberg kernel: [ 1850.472596] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:49:47.821142+01:00 heisenberg kernel: [ 1850.472731] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN 2023-11-08T17:49:47.821142+01:00 heisenberg kernel: [ 1850.472739] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:49:47.821143+01:00 heisenberg kernel: [ 1850.472867] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 2023-11-08T17:49:47.821143+01:00 heisenberg kernel: [ 1850.472875] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:49:47.821144+01:00 heisenberg kernel: [ 1850.473000] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 2023-11-08T17:49:47.821145+01:00 heisenberg kernel: [ 1850.473008] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:49:47.821145+01:00 heisenberg kernel: [ 1850.473229] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2023-11-08T17:49:47.821146+01:00 heisenberg kernel: [ 1850.473236] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:49:47.845366+01:00 heisenberg kernel: [ 1850.500407] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:49:47.845385+01:00 heisenberg kernel: [ 1850.500556] usb 4-1.4.1: cmd cmplt err -2 2023-11-08T17:49:47.929214+01:00 heisenberg kernel: [ 1850.580665] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:49:47.957210+01:00 heisenberg kernel: [ 1850.608390] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:50:18.545175+01:00 heisenberg kernel: [ 1881.196771] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:50:18.545205+01:00 heisenberg kernel: [ 1881.198435] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:50:18.545208+01:00 heisenberg kernel: [ 1881.198455] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:50:18.545209+01:00 heisenberg kernel: [ 1881.198463] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:50:18.545213+01:00 heisenberg kernel: [ 1881.198467] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:50:18.545214+01:00 heisenberg kernel: [ 1881.198472] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:50:18.545215+01:00 heisenberg kernel: [ 1881.198477] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:50:18.545215+01:00 heisenberg kernel: [ 1881.198482] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:50:18.545216+01:00 heisenberg kernel: [ 1881.198486] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:50:18.545217+01:00 heisenberg kernel: [ 1881.198491] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:50:18.545218+01:00 heisenberg kernel: [ 1881.198495] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:50:18.545219+01:00 heisenberg kernel: [ 1881.198501] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:50:18.545221+01:00 heisenberg kernel: [ 1881.198505] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:50:18.625347+01:00 heisenberg kernel: [ 1881.277228] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:50:18.649158+01:00 heisenberg kernel: [ 1881.304315] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:50:49.265206+01:00 heisenberg kernel: [ 1911.917049] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:50:49.265246+01:00 heisenberg kernel: [ 1911.917719] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:50:49.265248+01:00 heisenberg kernel: [ 1911.917734] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:50:49.265250+01:00 heisenberg kernel: [ 1911.917744] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:50:49.265251+01:00 heisenberg kernel: [ 1911.917751] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:50:49.265252+01:00 heisenberg kernel: [ 1911.917759] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:50:49.265253+01:00 heisenberg kernel: [ 1911.917765] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:50:49.265254+01:00 heisenberg kernel: [ 1911.917772] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:50:49.265258+01:00 heisenberg kernel: [ 1911.917778] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:50:49.265259+01:00 heisenberg kernel: [ 1911.917785] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:50:49.265260+01:00 heisenberg kernel: [ 1911.917791] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:50:49.265261+01:00 heisenberg kernel: [ 1911.917798] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:50:49.265262+01:00 heisenberg kernel: [ 1911.917804] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:50:49.345345+01:00 heisenberg kernel: [ 1911.997519] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:50:49.369159+01:00 heisenberg kernel: [ 1912.022661] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:51:19.989195+01:00 heisenberg kernel: [ 1942.641285] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:51:19.989239+01:00 heisenberg kernel: [ 1942.641911] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:51:19.989242+01:00 heisenberg kernel: [ 1942.641923] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:51:19.989243+01:00 heisenberg kernel: [ 1942.641931] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:51:19.989245+01:00 heisenberg kernel: [ 1942.641936] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:51:19.989246+01:00 heisenberg kernel: [ 1942.641941] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:51:19.989247+01:00 heisenberg kernel: [ 1942.641946] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:51:19.989249+01:00 heisenberg kernel: [ 1942.641951] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:51:19.989252+01:00 heisenberg kernel: [ 1942.641955] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:51:19.989253+01:00 heisenberg kernel: [ 1942.641960] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:51:19.989254+01:00 heisenberg kernel: [ 1942.641964] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:51:19.989256+01:00 heisenberg kernel: [ 1942.641969] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:51:19.989257+01:00 heisenberg kernel: [ 1942.641974] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:51:20.277287+01:00 heisenberg kernel: [ 1942.929764] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:51:20.301170+01:00 heisenberg kernel: [ 1942.955419] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:51:50.709084+01:00 heisenberg kernel: [ 1973.361614] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:51:50.709121+01:00 heisenberg kernel: [ 1973.362191] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:51:50.709125+01:00 heisenberg kernel: [ 1973.362203] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:51:50.709127+01:00 heisenberg kernel: [ 1973.362210] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:51:50.709129+01:00 heisenberg kernel: [ 1973.362214] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:51:50.709130+01:00 heisenberg kernel: [ 1973.362219] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:51:50.709132+01:00 heisenberg kernel: [ 1973.362223] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:51:50.709133+01:00 heisenberg kernel: [ 1973.362227] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:51:50.709138+01:00 heisenberg kernel: [ 1973.362231] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:51:50.709140+01:00 heisenberg kernel: [ 1973.362236] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:51:50.709141+01:00 heisenberg kernel: [ 1973.362240] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:51:50.709143+01:00 heisenberg kernel: [ 1973.362244] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:51:50.709145+01:00 heisenberg kernel: [ 1973.362248] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:51:50.789036+01:00 heisenberg kernel: [ 1973.442035] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:51:50.813022+01:00 heisenberg kernel: [ 1973.467064] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:52:21.425059+01:00 heisenberg kernel: [ 2004.077834] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:52:21.425087+01:00 heisenberg kernel: [ 2004.078412] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T17:52:21.425091+01:00 heisenberg kernel: [ 2004.078426] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:52:21.425092+01:00 heisenberg kernel: [ 2004.078435] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T17:52:21.425094+01:00 heisenberg kernel: [ 2004.078441] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:52:21.425095+01:00 heisenberg kernel: [ 2004.078446] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T17:52:21.425096+01:00 heisenberg kernel: [ 2004.078452] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:52:21.425097+01:00 heisenberg kernel: [ 2004.078457] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T17:52:21.425101+01:00 heisenberg kernel: [ 2004.078462] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:52:21.425102+01:00 heisenberg kernel: [ 2004.078468] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T17:52:21.425104+01:00 heisenberg kernel: [ 2004.078473] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:52:21.425105+01:00 heisenberg kernel: [ 2004.078479] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T17:52:21.425106+01:00 heisenberg kernel: [ 2004.078484] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:52:21.505313+01:00 heisenberg kernel: [ 2004.158534] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:52:21.533260+01:00 heisenberg kernel: [ 2004.185892] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:52:31.633207+01:00 heisenberg kernel: [ 2014.285931] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 2023-11-08T17:52:31.633237+01:00 heisenberg kernel: [ 2014.285949] sd 0:0:0:0: [sda] tag#0 CDB: Test Unit Ready 00 00 00 00 00 00 2023-11-08T17:52:31.633239+01:00 heisenberg kernel: [ 2014.285955] scsi host0: uas_eh_device_reset_handler start 2023-11-08T17:52:31.713238+01:00 heisenberg kernel: [ 2014.366682] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 14 using xhci_hcd 2023-11-08T17:52:31.737178+01:00 heisenberg kernel: [ 2014.392071] scsi host0: uas_eh_device_reset_handler success 2023-11-08T17:52:31.737200+01:00 heisenberg kernel: [ 2014.392086] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:52:31.737202+01:00 heisenberg kernel: [ 2014.392096] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:52:31.737203+01:00 heisenberg kernel: [ 2014.392099] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:52:31.737206+01:00 heisenberg kernel: [ 2014.392101] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:52:31.737207+01:00 heisenberg kernel: [ 2014.392103] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:52:31.737208+01:00 heisenberg kernel: [ 2014.392105] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T17:52:31.737208+01:00 heisenberg kernel: [ 2014.392120] sd 0:0:0:0: [sda] tag#5 timing out command, waited 180s 2023-11-08T17:52:31.737209+01:00 heisenberg kernel: [ 2014.392124] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T17:52:31.737211+01:00 heisenberg kernel: [ 2014.392128] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 06 e5 94 00 00 00 04 00 00 00 2023-11-08T17:52:31.737212+01:00 heisenberg kernel: [ 2014.392131] blk_print_req_error: 18 callbacks suppressed 2023-11-08T17:52:31.737213+01:00 heisenberg kernel: [ 2014.392133] I/O error, dev sda, sector 115708928 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737214+01:00 heisenberg kernel: [ 2014.392157] sd 0:0:0:0: [sda] tag#4 timing out command, waited 180s 2023-11-08T17:52:31.737214+01:00 heisenberg kernel: [ 2014.392163] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T17:52:31.737215+01:00 heisenberg kernel: [ 2014.392167] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 06 e5 90 00 00 00 04 00 00 00 2023-11-08T17:52:31.737217+01:00 heisenberg kernel: [ 2014.392170] I/O error, dev sda, sector 115707904 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737217+01:00 heisenberg kernel: [ 2014.392175] sd 0:0:0:0: rejecting I/O to offline device 2023-11-08T17:52:31.737218+01:00 heisenberg kernel: [ 2014.392182] I/O error, dev sda, sector 115710976 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737219+01:00 heisenberg kernel: [ 2014.392189] sd 0:0:0:0: [sda] tag#3 timing out command, waited 180s 2023-11-08T17:52:31.737220+01:00 heisenberg kernel: [ 2014.392194] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T17:52:31.737221+01:00 heisenberg kernel: [ 2014.392195] I/O error, dev sda, sector 115712000 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737222+01:00 heisenberg kernel: [ 2014.392199] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 06 e5 98 00 00 00 04 00 00 00 2023-11-08T17:52:31.737223+01:00 heisenberg kernel: [ 2014.392201] I/O error, dev sda, sector 115713024 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737225+01:00 heisenberg kernel: [ 2014.392203] I/O error, dev sda, sector 115709952 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737227+01:00 heisenberg kernel: [ 2014.392207] I/O error, dev sda, sector 115714048 op 0x0:(READ) flags 0x80700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737251+01:00 heisenberg kernel: [ 2014.392213] I/O error, dev sda, sector 115715072 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737253+01:00 heisenberg kernel: [ 2014.392214] sd 0:0:0:0: [sda] tag#2 timing out command, waited 180s 2023-11-08T17:52:31.737255+01:00 heisenberg kernel: [ 2014.392218] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T17:52:31.737256+01:00 heisenberg kernel: [ 2014.392221] I/O error, dev sda, sector 115716096 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737257+01:00 heisenberg kernel: [ 2014.392223] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 06 e5 84 00 00 00 04 00 00 00 2023-11-08T17:52:31.737258+01:00 heisenberg kernel: [ 2014.392227] I/O error, dev sda, sector 115704832 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T17:52:31.737259+01:00 heisenberg kernel: [ 2014.392236] sd 0:0:0:0: [sda] tag#1 timing out command, waited 180s 2023-11-08T17:52:31.737260+01:00 heisenberg kernel: [ 2014.392240] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T17:52:31.737261+01:00 heisenberg kernel: [ 2014.392245] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 06 e5 88 00 00 00 04 00 00 00 2023-11-08T17:52:31.737261+01:00 heisenberg kernel: [ 2014.392255] sd 0:0:0:0: [sda] tag#0 timing out command, waited 180s 2023-11-08T17:52:31.737262+01:00 heisenberg kernel: [ 2014.392260] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T17:52:31.737263+01:00 heisenberg kernel: [ 2014.392265] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 06 e5 8c 00 00 00 04 00 00 00 2023-11-08T17:54:03.485143+01:00 heisenberg kernel: [ 2106.138847] usb 4-1.4.1: USB disconnect, device number 14 2023-11-08T17:54:03.549050+01:00 heisenberg kernel: [ 2106.202926] sd 0:0:0:0: [sda] Synchronizing SCSI cache 2023-11-08T17:54:03.788993+01:00 heisenberg kernel: [ 2106.442750] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK 2023-11-08T17:55:29.673067+01:00 heisenberg kernel: [ 2192.327472] usb 4-1.4.1: new SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T17:55:29.705029+01:00 heisenberg kernel: [ 2192.359409] usb 4-1.4.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 0.00 2023-11-08T17:55:29.705047+01:00 heisenberg kernel: [ 2192.359434] usb 4-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:55:29.705049+01:00 heisenberg kernel: [ 2192.359440] usb 4-1.4.1: Product: HDD Enclosure 2023-11-08T17:55:29.705050+01:00 heisenberg kernel: [ 2192.359445] usb 4-1.4.1: Manufacturer: Inateck Technology Inc 2023-11-08T17:55:29.705056+01:00 heisenberg kernel: [ 2192.359449] usb 4-1.4.1: SerialNumber: ABCDEFA74566 2023-11-08T17:55:29.705056+01:00 heisenberg kernel: [ 2192.359865] usb 4-1.4.1: Device is not authorized for usage 2023-11-08T17:55:33.097098+01:00 heisenberg kernel: [ 2195.753260] scsi host0: uas 2023-11-08T17:55:33.097106+01:00 heisenberg kernel: [ 2195.753336] usb 4-1.4.1: authorized to connect 2023-11-08T17:55:33.141062+01:00 heisenberg kernel: [ 2195.796217] scsi 0:0:0:0: Direct-Access ST8000AS 0002-1NA17Z AR17 PQ: 0 ANSI: 6 2023-11-08T17:55:33.141075+01:00 heisenberg kernel: [ 2195.799315] sd 0:0:0:0: Attached scsi generic sg0 type 0 2023-11-08T17:55:33.144977+01:00 heisenberg kernel: [ 2195.799597] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) 2023-11-08T17:55:33.144987+01:00 heisenberg kernel: [ 2195.799601] sd 0:0:0:0: [sda] 4096-byte physical blocks 2023-11-08T17:55:33.144990+01:00 heisenberg kernel: [ 2195.799738] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:55:33.144990+01:00 heisenberg kernel: [ 2195.799740] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 2023-11-08T17:55:33.144990+01:00 heisenberg kernel: [ 2195.800086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T17:55:33.144991+01:00 heisenberg kernel: [ 2195.800252] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes 2023-11-08T17:55:33.144991+01:00 heisenberg kernel: [ 2195.800254] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) 2023-11-08T17:55:33.201214+01:00 heisenberg kernel: [ 2195.856065] sda: sda1 sda2 2023-11-08T17:55:33.201238+01:00 heisenberg kernel: [ 2195.857190] sd 0:0:0:0: [sda] Attached SCSI disk 2023-11-08T17:55:33.437113+01:00 heisenberg kernel: [ 2196.091907] BTRFS: device label data-b-1-meta devid 1 transid 25 /dev/sda2 scanned by (udev-worker) (15317) 2023-11-08T17:56:53.477075+01:00 heisenberg kernel: [ 2276.135895] BTRFS: device label data-b-1 devid 1 transid 10970 /dev/dm-1 scanned by (udev-worker) (17033) 2023-11-08T17:57:01.577100+01:00 heisenberg kernel: [ 2284.233402] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:57:01.577121+01:00 heisenberg kernel: [ 2284.233422] BTRFS info (device dm-1): using free space tree 2023-11-08T18:03:20.877143+01:00 heisenberg kernel: [ 2663.535406] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 2023-11-08T18:03:20.877171+01:00 heisenberg kernel: [ 2663.535424] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:03:20.877172+01:00 heisenberg kernel: [ 2663.535539] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 2023-11-08T18:03:20.877173+01:00 heisenberg kernel: [ 2663.535548] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:03:20.877174+01:00 heisenberg kernel: [ 2663.535697] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2023-11-08T18:03:20.877174+01:00 heisenberg kernel: [ 2663.535709] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:03:20.877175+01:00 heisenberg kernel: [ 2663.535853] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN 2023-11-08T18:03:20.877176+01:00 heisenberg kernel: [ 2663.535864] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:03:20.877177+01:00 heisenberg kernel: [ 2663.535966] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN 2023-11-08T18:03:20.877179+01:00 heisenberg kernel: [ 2663.535971] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:03:20.877179+01:00 heisenberg kernel: [ 2663.536086] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN 2023-11-08T18:03:20.877180+01:00 heisenberg kernel: [ 2663.536090] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:03:20.893022+01:00 heisenberg kernel: [ 2663.551427] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:03:20.893034+01:00 heisenberg kernel: [ 2663.551488] usb 4-1.4.1: cmd cmplt err -2 2023-11-08T18:03:20.977211+01:00 heisenberg kernel: [ 2663.635920] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:03:21.001051+01:00 heisenberg kernel: [ 2663.662836] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:03:51.601072+01:00 heisenberg kernel: [ 2694.259782] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:03:51.601092+01:00 heisenberg kernel: [ 2694.260989] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T18:03:51.601093+01:00 heisenberg kernel: [ 2694.260999] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:03:51.601094+01:00 heisenberg kernel: [ 2694.261006] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T18:03:51.601094+01:00 heisenberg kernel: [ 2694.261010] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:03:51.601095+01:00 heisenberg kernel: [ 2694.261014] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T18:03:51.601096+01:00 heisenberg kernel: [ 2694.261018] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:03:51.601097+01:00 heisenberg kernel: [ 2694.261022] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T18:03:51.601098+01:00 heisenberg kernel: [ 2694.261025] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:03:51.601099+01:00 heisenberg kernel: [ 2694.261028] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T18:03:51.601099+01:00 heisenberg kernel: [ 2694.261031] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:03:51.601100+01:00 heisenberg kernel: [ 2694.261035] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T18:03:51.601100+01:00 heisenberg kernel: [ 2694.261038] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:03:51.889172+01:00 heisenberg kernel: [ 2694.548545] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:03:51.917137+01:00 heisenberg kernel: [ 2694.576409] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:04:22.333056+01:00 heisenberg kernel: [ 2724.992052] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:04:22.333071+01:00 heisenberg kernel: [ 2724.993209] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T18:04:22.333072+01:00 heisenberg kernel: [ 2724.993216] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:04:22.333072+01:00 heisenberg kernel: [ 2724.993218] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T18:04:22.333073+01:00 heisenberg kernel: [ 2724.993220] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:04:22.333073+01:00 heisenberg kernel: [ 2724.993222] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T18:04:22.333074+01:00 heisenberg kernel: [ 2724.993223] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:04:22.333075+01:00 heisenberg kernel: [ 2724.993225] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T18:04:22.333076+01:00 heisenberg kernel: [ 2724.993226] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:04:22.333076+01:00 heisenberg kernel: [ 2724.993228] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T18:04:22.333077+01:00 heisenberg kernel: [ 2724.993229] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:04:22.333077+01:00 heisenberg kernel: [ 2724.993231] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T18:04:22.333078+01:00 heisenberg kernel: [ 2724.993232] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:04:22.413280+01:00 heisenberg kernel: [ 2725.072658] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:04:22.441150+01:00 heisenberg kernel: [ 2725.100358] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:04:53.049089+01:00 heisenberg kernel: [ 2755.708259] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:04:53.049124+01:00 heisenberg kernel: [ 2755.709970] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T18:04:53.049127+01:00 heisenberg kernel: [ 2755.709988] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:04:53.049128+01:00 heisenberg kernel: [ 2755.709996] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T18:04:53.049129+01:00 heisenberg kernel: [ 2755.710001] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:04:53.049131+01:00 heisenberg kernel: [ 2755.710007] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T18:04:53.049132+01:00 heisenberg kernel: [ 2755.710011] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:04:53.049133+01:00 heisenberg kernel: [ 2755.710016] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T18:04:53.049135+01:00 heisenberg kernel: [ 2755.710021] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:04:53.049137+01:00 heisenberg kernel: [ 2755.710025] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T18:04:53.049138+01:00 heisenberg kernel: [ 2755.710030] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:04:53.049139+01:00 heisenberg kernel: [ 2755.710034] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T18:04:53.049140+01:00 heisenberg kernel: [ 2755.710039] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:04:53.129274+01:00 heisenberg kernel: [ 2755.789050] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:04:53.157241+01:00 heisenberg kernel: [ 2755.816801] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:05:17.585001+01:00 heisenberg kernel: [ 2780.244360] INFO: task cp:17113 blocked for more than 120 seconds. 2023-11-08T18:05:17.585016+01:00 heisenberg kernel: [ 2780.244370] Not tainted 6.5.0-4-amd64 #1 Debian 6.5.10-1 2023-11-08T18:05:17.585017+01:00 heisenberg kernel: [ 2780.244372] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 2023-11-08T18:05:17.585017+01:00 heisenberg kernel: [ 2780.244374] task:cp state:D stack:0 pid:17113 ppid:14149 flags:0x00004006 2023-11-08T18:05:17.585018+01:00 heisenberg kernel: [ 2780.244380] Call Trace: 2023-11-08T18:05:17.585018+01:00 heisenberg kernel: [ 2780.244383] <TASK> 2023-11-08T18:05:17.585019+01:00 heisenberg kernel: [ 2780.244388] __schedule+0x3db/0xb30 2023-11-08T18:05:17.585020+01:00 heisenberg kernel: [ 2780.244398] schedule+0x5e/0xd0 2023-11-08T18:05:17.585021+01:00 heisenberg kernel: [ 2780.244401] io_schedule+0x46/0x70 2023-11-08T18:05:17.585021+01:00 heisenberg kernel: [ 2780.244404] blk_mq_get_tag+0x11e/0x2b0 2023-11-08T18:05:17.585022+01:00 heisenberg kernel: [ 2780.244410] ? __pfx_autoremove_wake_function+0x10/0x10 2023-11-08T18:05:17.585022+01:00 heisenberg kernel: [ 2780.244416] __blk_mq_alloc_requests+0x1bc/0x350 2023-11-08T18:05:17.585023+01:00 heisenberg kernel: [ 2780.244421] blk_mq_submit_bio+0x2bf/0x620 2023-11-08T18:05:17.585023+01:00 heisenberg kernel: [ 2780.244425] submit_bio_noacct_nocheck+0x159/0x370 2023-11-08T18:05:17.585024+01:00 heisenberg kernel: [ 2780.244433] btrfs_submit_chunk+0x163/0x520 [btrfs] 2023-11-08T18:05:17.585025+01:00 heisenberg kernel: [ 2780.244516] btrfs_submit_bio+0x1a/0x30 [btrfs] 2023-11-08T18:05:17.585025+01:00 heisenberg kernel: [ 2780.244583] submit_one_bio+0x36/0x50 [btrfs] 2023-11-08T18:05:17.585026+01:00 heisenberg kernel: [ 2780.244667] extent_readahead+0x37b/0x3b0 [btrfs] 2023-11-08T18:05:17.585026+01:00 heisenberg kernel: [ 2780.244748] ? __pfx_end_bio_extent_readpage+0x10/0x10 [btrfs] 2023-11-08T18:05:17.585027+01:00 heisenberg kernel: [ 2780.244827] read_pages+0x85/0x260 2023-11-08T18:05:17.585028+01:00 heisenberg kernel: [ 2780.244832] page_cache_ra_unbounded+0x12e/0x180 2023-11-08T18:05:17.585028+01:00 heisenberg kernel: [ 2780.244835] filemap_get_pages+0x4d7/0x630 2023-11-08T18:05:17.585029+01:00 heisenberg kernel: [ 2780.244841] filemap_read+0xd9/0x350 2023-11-08T18:05:17.585029+01:00 heisenberg kernel: [ 2780.244845] vfs_read+0x1fe/0x350 2023-11-08T18:05:17.585030+01:00 heisenberg kernel: [ 2780.244851] ksys_read+0x6f/0xf0 2023-11-08T18:05:17.585030+01:00 heisenberg kernel: [ 2780.244855] do_syscall_64+0x5d/0xc0 2023-11-08T18:05:17.585031+01:00 heisenberg kernel: [ 2780.244859] ? do_syscall_64+0x6c/0xc0 2023-11-08T18:05:17.585032+01:00 heisenberg kernel: [ 2780.244862] ? do_syscall_64+0x6c/0xc0 2023-11-08T18:05:17.585032+01:00 heisenberg kernel: [ 2780.244865] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 2023-11-08T18:05:17.585033+01:00 heisenberg kernel: [ 2780.244870] RIP: 0033:0x7f8e5e692a5d 2023-11-08T18:05:17.585033+01:00 heisenberg kernel: [ 2780.244874] RSP: 002b:00007fff5e031058 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 2023-11-08T18:05:17.585034+01:00 heisenberg kernel: [ 2780.244877] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f8e5e692a5d 2023-11-08T18:05:17.585034+01:00 heisenberg kernel: [ 2780.244880] RDX: 0000000000020000 RSI: 00007f8e5e4db000 RDI: 0000000000000004 2023-11-08T18:05:17.585035+01:00 heisenberg kernel: [ 2780.244882] RBP: 0000000000000000 R08: 00000000ffffffff R09: 0000000000000000 2023-11-08T18:05:17.585035+01:00 heisenberg kernel: [ 2780.244884] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000048811100 2023-11-08T18:05:17.585036+01:00 heisenberg kernel: [ 2780.244886] R13: 0000000048811100 R14: 0000000000000000 R15: 00007f8e5e4fb000 2023-11-08T18:05:17.585036+01:00 heisenberg kernel: [ 2780.244890] </TASK> 2023-11-08T18:05:23.792987+01:00 heisenberg kernel: [ 2786.452313] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:05:23.792997+01:00 heisenberg kernel: [ 2786.453331] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T18:05:23.792998+01:00 heisenberg kernel: [ 2786.453336] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:05:23.792998+01:00 heisenberg kernel: [ 2786.453339] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T18:05:23.792998+01:00 heisenberg kernel: [ 2786.453341] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:05:23.792999+01:00 heisenberg kernel: [ 2786.453343] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T18:05:23.792999+01:00 heisenberg kernel: [ 2786.453344] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:05:23.792999+01:00 heisenberg kernel: [ 2786.453346] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T18:05:23.793001+01:00 heisenberg kernel: [ 2786.453347] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:05:23.793001+01:00 heisenberg kernel: [ 2786.453349] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T18:05:23.793001+01:00 heisenberg kernel: [ 2786.453350] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:05:23.793002+01:00 heisenberg kernel: [ 2786.453352] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T18:05:23.793002+01:00 heisenberg kernel: [ 2786.453353] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:05:23.877189+01:00 heisenberg kernel: [ 2786.537061] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:05:23.901019+01:00 heisenberg kernel: [ 2786.561872] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:05:54.504985+01:00 heisenberg kernel: [ 2817.164689] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:05:54.505001+01:00 heisenberg kernel: [ 2817.165549] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD 2023-11-08T18:05:54.505002+01:00 heisenberg kernel: [ 2817.165553] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:05:54.505003+01:00 heisenberg kernel: [ 2817.165555] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD 2023-11-08T18:05:54.505004+01:00 heisenberg kernel: [ 2817.165557] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:05:54.505004+01:00 heisenberg kernel: [ 2817.165558] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 3 inflight: CMD 2023-11-08T18:05:54.505005+01:00 heisenberg kernel: [ 2817.165560] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:05:54.505005+01:00 heisenberg kernel: [ 2817.165561] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 4 inflight: CMD 2023-11-08T18:05:54.505007+01:00 heisenberg kernel: [ 2817.165563] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:05:54.505008+01:00 heisenberg kernel: [ 2817.165564] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 5 inflight: CMD 2023-11-08T18:05:54.505009+01:00 heisenberg kernel: [ 2817.165566] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:05:54.505009+01:00 heisenberg kernel: [ 2817.165567] sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 6 inflight: CMD 2023-11-08T18:05:54.505010+01:00 heisenberg kernel: [ 2817.165568] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:05:54.585121+01:00 heisenberg kernel: [ 2817.245102] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:05:54.609155+01:00 heisenberg kernel: [ 2817.271476] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:06:04.689094+01:00 heisenberg kernel: [ 2827.348805] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 2023-11-08T18:06:04.689121+01:00 heisenberg kernel: [ 2827.348828] sd 0:0:0:0: [sda] tag#0 CDB: Test Unit Ready 00 00 00 00 00 00 2023-11-08T18:06:04.689124+01:00 heisenberg kernel: [ 2827.348835] scsi host0: uas_eh_device_reset_handler start 2023-11-08T18:06:04.773096+01:00 heisenberg kernel: [ 2827.433308] usb 4-1.4.1: reset SuperSpeed Plus Gen 2x1 USB device number 15 using xhci_hcd 2023-11-08T18:06:04.797012+01:00 heisenberg kernel: [ 2827.458888] scsi host0: uas_eh_device_reset_handler success 2023-11-08T18:06:04.797028+01:00 heisenberg kernel: [ 2827.458901] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T18:06:04.797030+01:00 heisenberg kernel: [ 2827.458913] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T18:06:04.797030+01:00 heisenberg kernel: [ 2827.458916] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T18:06:04.797033+01:00 heisenberg kernel: [ 2827.458918] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T18:06:04.797033+01:00 heisenberg kernel: [ 2827.458920] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T18:06:04.797034+01:00 heisenberg kernel: [ 2827.458922] sd 0:0:0:0: Device offlined - not ready after error recovery 2023-11-08T18:06:04.797035+01:00 heisenberg kernel: [ 2827.458933] sd 0:0:0:0: [sda] tag#5 timing out command, waited 180s 2023-11-08T18:06:04.797035+01:00 heisenberg kernel: [ 2827.458937] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T18:06:04.797036+01:00 heisenberg kernel: [ 2827.458941] sd 0:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 10 ff 08 00 00 00 04 00 00 00 2023-11-08T18:06:04.797037+01:00 heisenberg kernel: [ 2827.458943] blk_print_req_error: 16 callbacks suppressed 2023-11-08T18:06:04.797037+01:00 heisenberg kernel: [ 2827.458945] I/O error, dev sda, sector 285149184 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797038+01:00 heisenberg kernel: [ 2827.458965] sd 0:0:0:0: [sda] tag#4 timing out command, waited 180s 2023-11-08T18:06:04.797039+01:00 heisenberg kernel: [ 2827.458969] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T18:06:04.797040+01:00 heisenberg kernel: [ 2827.458972] sd 0:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 10 fe f8 00 00 00 04 00 00 00 2023-11-08T18:06:04.797041+01:00 heisenberg kernel: [ 2827.458974] I/O error, dev sda, sector 285145088 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797042+01:00 heisenberg kernel: [ 2827.458978] sd 0:0:0:0: rejecting I/O to offline device 2023-11-08T18:06:04.797042+01:00 heisenberg kernel: [ 2827.458985] sd 0:0:0:0: [sda] tag#3 timing out command, waited 180s 2023-11-08T18:06:04.797043+01:00 heisenberg kernel: [ 2827.458985] I/O error, dev sda, sector 285151232 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797044+01:00 heisenberg kernel: [ 2827.458989] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T18:06:04.797045+01:00 heisenberg kernel: [ 2827.458992] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 10 ff 04 00 00 00 04 00 00 00 2023-11-08T18:06:04.797046+01:00 heisenberg kernel: [ 2827.458993] I/O error, dev sda, sector 285148160 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797047+01:00 heisenberg kernel: [ 2827.459001] sd 0:0:0:0: [sda] tag#2 timing out command, waited 180s 2023-11-08T18:06:04.797048+01:00 heisenberg kernel: [ 2827.459000] I/O error, dev sda, sector 285152256 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797048+01:00 heisenberg kernel: [ 2827.459004] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T18:06:04.797049+01:00 heisenberg kernel: [ 2827.459006] I/O error, dev sda, sector 285153280 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797050+01:00 heisenberg kernel: [ 2827.459008] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 00 10 fe fc 00 00 00 04 00 00 00 2023-11-08T18:06:04.797051+01:00 heisenberg kernel: [ 2827.459011] I/O error, dev sda, sector 285154304 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797051+01:00 heisenberg kernel: [ 2827.459011] I/O error, dev sda, sector 285146112 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797052+01:00 heisenberg kernel: [ 2827.459017] I/O error, dev sda, sector 285155328 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797053+01:00 heisenberg kernel: [ 2827.459019] sd 0:0:0:0: [sda] tag#1 timing out command, waited 180s 2023-11-08T18:06:04.797054+01:00 heisenberg kernel: [ 2827.459021] I/O error, dev sda, sector 285156352 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2 2023-11-08T18:06:04.797055+01:00 heisenberg kernel: [ 2827.459022] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T18:06:04.797055+01:00 heisenberg kernel: [ 2827.459025] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 00 10 ff 0c 00 00 00 04 00 00 00 2023-11-08T18:06:04.797056+01:00 heisenberg kernel: [ 2827.459031] sd 0:0:0:0: [sda] tag#0 timing out command, waited 180s 2023-11-08T18:06:04.797057+01:00 heisenberg kernel: [ 2827.459034] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_OK cmd_age=194s 2023-11-08T18:06:04.797057+01:00 heisenberg kernel: [ 2827.459036] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 10 ff 00 00 00 00 04 00 00 00 2023-11-08T18:10:34.369147+01:00 heisenberg kernel: [ 3097.031699] sd 1:0:0:0: [sdb] Synchronizing SCSI cache 2023-11-08T18:10:34.613024+01:00 heisenberg kernel: [ 3097.275824] sd 1:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK 2023-11-08T18:10:34.640985+01:00 heisenberg kernel: [ 3097.304175] usb 4-1.4.2: USB disconnect, device number 7 2023-11-08T18:15:01.297147+01:00 heisenberg kernel: [ 3363.962824] usb 4-1.4.1: USB disconnect, device number 15 2023-11-08T18:15:01.385073+01:00 heisenberg kernel: [ 3364.050320] sd 0:0:0:0: [sda] Synchronizing SCSI cache 2023-11-08T18:15:01.641016+01:00 heisenberg kernel: [ 3364.306296] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK 2023-11-08T18:15:41.333209+01:00 heisenberg kernel: [ 3404.000219] usb 1-1: USB disconnect, device number 2 2023-11-08T18:15:41.333227+01:00 heisenberg kernel: [ 3404.000232] usb 1-1.2: USB disconnect, device number 5 2023-11-08T18:15:41.333238+01:00 heisenberg kernel: [ 3404.001297] usb 1-1.4: USB disconnect, device number 8 2023-11-08T18:15:41.333240+01:00 heisenberg kernel: [ 3404.001306] usb 1-1.4.3: USB disconnect, device number 10 2023-11-08T18:15:41.333242+01:00 heisenberg kernel: [ 3404.002364] usb 1-1.4.4: USB disconnect, device number 11 2023-11-08T18:15:41.333245+01:00 heisenberg kernel: [ 3404.002669] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T18:15:41.341063+01:00 heisenberg kernel: [ 3404.009644] usb 4-1: USB disconnect, device number 2 2023-11-08T18:15:41.341101+01:00 heisenberg kernel: [ 3404.009681] usb 4-1.4: USB disconnect, device number 3 2023-11-08T18:15:41.341106+01:00 heisenberg kernel: [ 3404.009696] usb 4-1.4.3: USB disconnect, device number 4 2023-11-08T18:15:41.341109+01:00 heisenberg kernel: [ 3404.009707] r8152-cfgselector 4-1.4.3.4: USB disconnect, device number 5 2023-11-08T18:15:41.341116+01:00 heisenberg kernel: [ 3404.010053] r8152 4-1.4.3.4:1.0 eth2: Stop submitting intr, status -108 2023-11-08T18:15:41.349590+01:00 heisenberg kernel: [ 3404.014733] thunderbolt 0-1: device disconnected 2023-11-08T18:15:41.361077+01:00 heisenberg kernel: [ 3404.027264] pcieport 0000:00:07.0: pciehp: Slot(3): Link Down 2023-11-08T18:15:41.361137+01:00 heisenberg kernel: [ 3404.027303] pcieport 0000:00:07.0: pciehp: Slot(3): Card not present 2023-11-08T18:15:41.373369+01:00 heisenberg kernel: [ 3404.041973] igc 0000:28:00.0 eth1: PHC removed 2023-11-08T18:15:41.373417+01:00 heisenberg kernel: [ 3404.042382] igc 0000:28:00.0 eth1: PCIe link lost, device now detached 2023-11-08T18:15:41.524988+01:00 heisenberg kernel: [ 3404.192166] usb 1-1.4.5: USB disconnect, device number 12 2023-11-08T18:15:41.605028+01:00 heisenberg kernel: [ 3404.271236] pcieport 0000:03:03.0: Unable to change power state from D3hot to D0, device inaccessible 2023-11-08T18:15:41.605051+01:00 heisenberg kernel: [ 3404.271521] pcieport 0000:03:03.0: Runtime PM usage count underflow! 2023-11-08T18:15:41.605053+01:00 heisenberg kernel: [ 3404.271541] pcieport 0000:03:02.0: Unable to change power state from D3hot to D0, device inaccessible 2023-11-08T18:15:41.605054+01:00 heisenberg kernel: [ 3404.272774] pcieport 0000:03:02.0: Runtime PM usage count underflow! 2023-11-08T18:15:41.605055+01:00 heisenberg kernel: [ 3404.272801] pcieport 0000:03:01.0: Unable to change power state from D3hot to D0, device inaccessible 2023-11-08T18:15:41.605056+01:00 heisenberg kernel: [ 3404.273388] pcieport 0000:03:01.0: Runtime PM usage count underflow! 2023-11-08T18:15:41.605057+01:00 heisenberg kernel: [ 3404.273408] pcieport 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible 2023-11-08T18:15:41.605060+01:00 heisenberg kernel: [ 3404.274253] pci_bus 0000:04: busn_res: [bus 04] is released 2023-11-08T18:15:41.609013+01:00 heisenberg kernel: [ 3404.274916] pci_bus 0000:05: busn_res: [bus 05-0f] is released 2023-11-08T18:15:41.609025+01:00 heisenberg kernel: [ 3404.275489] pci_bus 0000:10: busn_res: [bus 10-1a] is released 2023-11-08T18:15:41.609026+01:00 heisenberg kernel: [ 3404.276044] pci_bus 0000:1b: busn_res: [bus 1b-27] is released 2023-11-08T18:15:41.609027+01:00 heisenberg kernel: [ 3404.276617] pci_bus 0000:28: busn_res: [bus 28] is released 2023-11-08T18:15:41.609028+01:00 heisenberg kernel: [ 3404.276791] pci_bus 0000:03: busn_res: [bus 03-28] is released 2023-11-08T18:16:17.021245+01:00 heisenberg kernel: [ 3439.687336] usb usb4-port1: attempt power cycle 2023-11-08T18:16:25.545026+01:00 heisenberg kernel: [ 3448.211497] usb usb4-port1: unable to enumerate USB device 2023-11-08T18:17:30.681024+01:00 heisenberg kernel: [ 3513.349839] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T18:17:30.749014+01:00 heisenberg kernel: [ 3513.417937] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T18:17:30.749037+01:00 heisenberg kernel: [ 3513.417953] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T18:17:32.145098+01:00 heisenberg kernel: [ 3514.811746] usb 1-1: new high-speed USB device number 13 using xhci_hcd 2023-11-08T18:17:32.293012+01:00 heisenberg kernel: [ 3514.960376] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T18:17:32.293030+01:00 heisenberg kernel: [ 3514.960390] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T18:17:32.293032+01:00 heisenberg kernel: [ 3514.960394] usb 1-1: Product: USB2.0 Hub 2023-11-08T18:17:32.293033+01:00 heisenberg kernel: [ 3514.960397] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T18:17:32.293034+01:00 heisenberg kernel: [ 3514.961365] usb 1-1: Device is not authorized for usage 2023-11-08T18:17:32.325004+01:00 heisenberg kernel: [ 3514.991933] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 20 using xhci_hcd 2023-11-08T18:17:32.344993+01:00 heisenberg kernel: [ 3515.012200] usb 4-1: New USB device found, idVendor=8087, idProduct=0b40, bcdDevice=12.34 2023-11-08T18:17:32.345005+01:00 heisenberg kernel: [ 3515.012208] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T18:17:32.345006+01:00 heisenberg kernel: [ 3515.012209] usb 4-1: Product: USB3.0 Hub 2023-11-08T18:17:32.345007+01:00 heisenberg kernel: [ 3515.012210] usb 4-1: Manufacturer: Intel Corporation. 2023-11-08T18:17:32.345007+01:00 heisenberg kernel: [ 3515.013386] usb 4-1: Device is not authorized for usage 2023-11-08T18:17:36.709177+01:00 heisenberg kernel: [ 3519.376706] usb 1-1: USB disconnect, device number 13 2023-11-08T18:17:36.709234+01:00 heisenberg kernel: [ 3519.378990] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T18:17:36.717162+01:00 heisenberg kernel: [ 3519.386817] usb 4-1: USB disconnect, device number 20 2023-11-08T18:17:36.721086+01:00 heisenberg kernel: [ 3519.387912] thunderbolt 0-1: device disconnected 2023-11-08T18:18:16.677065+01:00 heisenberg kernel: [ 3559.346990] thunderbolt 0-0:3.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T18:18:16.745047+01:00 heisenberg kernel: [ 3559.414512] thunderbolt 0-3: new device found, vendor=0x23f device=0x19 2023-11-08T18:18:16.745056+01:00 heisenberg kernel: [ 3559.414517] thunderbolt 0-3: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T18:18:18.169321+01:00 heisenberg kernel: [ 3560.836415] usb 4-2: new SuperSpeed Plus Gen 2x1 USB device number 21 using xhci_hcd 2023-11-08T18:18:18.193039+01:00 heisenberg kernel: [ 3560.860584] usb 4-2: New USB device found, idVendor=8087, idProduct=0b40, bcdDevice=12.34 2023-11-08T18:18:18.193072+01:00 heisenberg kernel: [ 3560.860599] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T18:18:18.193075+01:00 heisenberg kernel: [ 3560.860604] usb 4-2: Product: USB3.0 Hub 2023-11-08T18:18:18.193080+01:00 heisenberg kernel: [ 3560.860607] usb 4-2: Manufacturer: Intel Corporation. 2023-11-08T18:18:18.193081+01:00 heisenberg kernel: [ 3560.861410] usb 4-2: Device is not authorized for usage 2023-11-08T18:18:18.277147+01:00 heisenberg kernel: [ 3560.944168] usb 1-2: new high-speed USB device number 14 using xhci_hcd 2023-11-08T18:18:18.425037+01:00 heisenberg kernel: [ 3561.092677] usb 1-2: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T18:18:18.425060+01:00 heisenberg kernel: [ 3561.092693] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T18:18:18.425061+01:00 heisenberg kernel: [ 3561.092697] usb 1-2: Product: USB2.0 Hub 2023-11-08T18:18:18.425063+01:00 heisenberg kernel: [ 3561.092700] usb 1-2: Manufacturer: Fresco Logic, Inc. 2023-11-08T18:18:18.425064+01:00 heisenberg kernel: [ 3561.095509] usb 1-2: Device is not authorized for usage 2023-11-08T18:19:11.089081+01:00 heisenberg kernel: [ 3613.758537] usb 1-2: USB disconnect, device number 14 2023-11-08T18:19:11.093230+01:00 heisenberg kernel: [ 3613.760931] thunderbolt 0-0:3.1: retimer disconnected 2023-11-08T18:19:11.101136+01:00 heisenberg kernel: [ 3613.769449] usb 4-2: USB disconnect, device number 21 2023-11-08T18:19:11.105087+01:00 heisenberg kernel: [ 3613.774073] thunderbolt 0-3: device disconnected 2023-11-08T18:24:55.201379+01:00 heisenberg kernel: [ 3957.871961] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd 2023-11-08T18:24:55.221011+01:00 heisenberg kernel: [ 3957.893236] usb 2-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 2023-11-08T18:24:55.221030+01:00 heisenberg kernel: [ 3957.893249] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T18:24:55.221032+01:00 heisenberg kernel: [ 3957.893252] usb 2-2: Product: SanDisk 3.2Gen1 2023-11-08T18:24:55.221035+01:00 heisenberg kernel: [ 3957.893255] usb 2-2: Manufacturer: USB 2023-11-08T18:24:55.221036+01:00 heisenberg kernel: [ 3957.893257] usb 2-2: SerialNumber: 0501f9a44b35cbf8a48a068790eeb6a92d81ea59c9bd332312e9d82a0d7eb312b7cd0000000000000000000060c53a5a00130510915581071daac696 2023-11-08T18:24:55.221038+01:00 heisenberg kernel: [ 3957.894121] usb 2-2: Device is not authorized for usage 2023-11-08T18:24:56.689009+01:00 heisenberg kernel: [ 3959.361173] usb-storage 2-2:1.0: USB Mass Storage device detected 2023-11-08T18:24:56.689080+01:00 heisenberg kernel: [ 3959.361956] scsi host0: usb-storage 2-2:1.0 2023-11-08T18:24:56.689084+01:00 heisenberg kernel: [ 3959.362179] usb 2-2: authorized to connect 2023-11-08T18:24:57.713023+01:00 heisenberg kernel: [ 3960.385696] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 2023-11-08T18:24:57.713045+01:00 heisenberg kernel: [ 3960.386068] sd 0:0:0:0: Attached scsi generic sg0 type 0 2023-11-08T18:24:57.713048+01:00 heisenberg kernel: [ 3960.386716] sd 0:0:0:0: [sda] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) 2023-11-08T18:24:57.713049+01:00 heisenberg kernel: [ 3960.387585] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T18:24:57.713050+01:00 heisenberg kernel: [ 3960.387593] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 2023-11-08T18:24:57.717009+01:00 heisenberg kernel: [ 3960.388135] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 2023-11-08T18:24:57.733107+01:00 heisenberg kernel: [ 3960.405407] sda: sda1 sda2 sda3 2023-11-08T18:24:57.733115+01:00 heisenberg kernel: [ 3960.405575] sd 0:0:0:0: [sda] Attached SCSI removable disk 2023-11-08T18:25:51.465001+01:00 heisenberg kernel: [ 4014.136376] usb 2-2: USB disconnect, device number 2
2023-11-08T17:14:12.699549+01:00 heisenberg kernel: [ 1.868535] ACPI: bus type USB registered 2023-11-08T17:14:12.699549+01:00 heisenberg kernel: [ 1.869102] usbcore: registered new interface driver usbfs 2023-11-08T17:14:12.699550+01:00 heisenberg kernel: [ 1.869652] usbcore: registered new interface driver hub 2023-11-08T17:14:12.699550+01:00 heisenberg kernel: [ 1.870205] usbcore: registered new device driver usb 2023-11-08T17:14:12.699553+01:00 heisenberg kernel: [ 1.871356] e1000e: Intel(R) PRO/1000 Network Driver 2023-11-08T17:14:12.699553+01:00 heisenberg kernel: [ 1.871357] AVX2 version of gcm_enc/dec engaged. 2023-11-08T17:14:12.699554+01:00 heisenberg kernel: [ 1.872506] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 2023-11-08T17:14:12.699554+01:00 heisenberg kernel: [ 1.873020] AES CTR mode by8 optimization enabled 2023-11-08T17:14:12.699555+01:00 heisenberg kernel: [ 1.873326] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 2023-11-08T17:14:12.699555+01:00 heisenberg kernel: [ 1.877931] ACPI: bus type thunderbolt registered 2023-11-08T17:14:12.699555+01:00 heisenberg kernel: [ 1.888246] ACPI: bus type drm_connector registered 2023-11-08T17:14:12.699559+01:00 heisenberg kernel: [ 1.890962] xhci_hcd 0000:00:14.0: xHCI Host Controller 2023-11-08T17:14:12.699559+01:00 heisenberg kernel: [ 1.891571] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 2023-11-08T17:14:12.699561+01:00 heisenberg kernel: [ 1.892456] nvme 0000:01:00.0: platform quirk: setting simple suspend 2023-11-08T17:14:12.699562+01:00 heisenberg kernel: [ 1.893269] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810 2023-11-08T17:14:12.699562+01:00 heisenberg kernel: [ 1.893509] nvme nvme0: pci function 0000:01:00.0 2023-11-08T17:14:12.699563+01:00 heisenberg kernel: [ 1.894181] xhci_hcd 0000:00:14.0: xHCI Host Controller 2023-11-08T17:14:12.699566+01:00 heisenberg kernel: [ 1.895295] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 2023-11-08T17:14:12.699567+01:00 heisenberg kernel: [ 1.895695] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed 2023-11-08T17:14:12.699567+01:00 heisenberg kernel: [ 1.896145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 2023-11-08T17:14:12.699567+01:00 heisenberg kernel: [ 1.896546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:14:12.699568+01:00 heisenberg kernel: [ 1.896962] usb usb1: Product: xHCI Host Controller 2023-11-08T17:14:12.699568+01:00 heisenberg kernel: [ 1.897380] usb usb1: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:14:12.699572+01:00 heisenberg kernel: [ 1.897775] usb usb1: SerialNumber: 0000:00:14.0 2023-11-08T17:14:12.699572+01:00 heisenberg kernel: [ 1.898311] hub 1-0:1.0: USB hub found 2023-11-08T17:14:12.699573+01:00 heisenberg kernel: [ 1.898741] hub 1-0:1.0: 12 ports detected 2023-11-08T17:14:12.699573+01:00 heisenberg kernel: [ 1.902300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 2023-11-08T17:14:12.699573+01:00 heisenberg kernel: [ 1.902765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:14:12.699574+01:00 heisenberg kernel: [ 1.903251] usb usb2: Product: xHCI Host Controller 2023-11-08T17:14:12.699574+01:00 heisenberg kernel: [ 1.903708] usb usb2: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:14:12.699577+01:00 heisenberg kernel: [ 1.904173] usb usb2: SerialNumber: 0000:00:14.0 2023-11-08T17:14:12.699577+01:00 heisenberg kernel: [ 1.904662] hub 2-0:1.0: USB hub found 2023-11-08T17:14:12.699578+01:00 heisenberg kernel: [ 1.905092] hub 2-0:1.0: 4 ports detected 2023-11-08T17:14:12.699578+01:00 heisenberg kernel: [ 1.907339] nvme nvme0: Shutdown timeout set to 10 seconds 2023-11-08T17:14:12.699579+01:00 heisenberg kernel: [ 1.912085] nvme nvme0: 16/0/0 default/read/poll queues 2023-11-08T17:14:12.699579+01:00 heisenberg kernel: [ 1.914982] nvme0n1: p1 p2 p3 2023-11-08T17:14:12.699582+01:00 heisenberg kernel: [ 2.079168] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock 2023-11-08T17:14:12.699582+01:00 heisenberg kernel: [ 2.125259] i915 0000:00:02.0: [drm] VT-d active for gfx access 2023-11-08T17:14:12.699583+01:00 heisenberg kernel: [ 2.125998] Console: switching to colour dummy device 80x25 2023-11-08T17:14:12.699583+01:00 heisenberg kernel: [ 2.126025] i915 0000:00:02.0: vgaarb: deactivate vga console 2023-11-08T17:14:12.699584+01:00 heisenberg kernel: [ 2.126062] i915 0000:00:02.0: [drm] Using Transparent Hugepages 2023-11-08T17:14:12.699584+01:00 heisenberg kernel: [ 2.126533] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem 2023-11-08T17:14:12.699589+01:00 heisenberg kernel: [ 2.126618] i915 0000:00:02.0: firmware: direct-loading firmware i915/adlp_dmc.bin 2023-11-08T17:14:12.699589+01:00 heisenberg kernel: [ 2.128653] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.19) 2023-11-08T17:14:12.699590+01:00 heisenberg kernel: [ 2.143323] i915 0000:00:02.0: firmware: direct-loading firmware i915/adlp_guc_70.bin 2023-11-08T17:14:12.699590+01:00 heisenberg kernel: [ 2.144269] i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_huc.bin 2023-11-08T17:14:12.699590+01:00 heisenberg kernel: [ 2.148869] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 2023-11-08T17:14:12.699591+01:00 heisenberg kernel: [ 2.148876] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 2023-11-08T17:14:12.699591+01:00 heisenberg kernel: [ 2.149293] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) e4:46:b0:18:03:5b 2023-11-08T17:14:12.699594+01:00 heisenberg kernel: [ 2.149301] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection 2023-11-08T17:14:12.699595+01:00 heisenberg kernel: [ 2.149451] e1000e 0000:00:1f.6 eth0: MAC: 15, PHY: 12, PBA No: FFFFFF-0FF 2023-11-08T17:14:12.699595+01:00 heisenberg kernel: [ 2.157041] usb 1-5: new high-speed USB device number 2 using xhci_hcd 2023-11-08T17:14:12.699595+01:00 heisenberg kernel: [ 2.165963] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads 2023-11-08T17:14:12.699596+01:00 heisenberg kernel: [ 2.166524] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled 2023-11-08T17:14:12.699596+01:00 heisenberg kernel: [ 2.166526] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled 2023-11-08T17:14:12.699599+01:00 heisenberg kernel: [ 2.166805] xhci_hcd 0000:00:0d.0: xHCI Host Controller 2023-11-08T17:14:12.699600+01:00 heisenberg kernel: [ 2.166811] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 3 2023-11-08T17:14:12.699600+01:00 heisenberg kernel: [ 2.166966] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled 2023-11-08T17:14:12.699600+01:00 heisenberg kernel: [ 2.167786] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized 2023-11-08T17:14:12.699601+01:00 heisenberg kernel: [ 2.167894] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 2023-11-08T17:14:12.699601+01:00 heisenberg kernel: [ 2.168062] xhci_hcd 0000:00:0d.0: xHCI Host Controller 2023-11-08T17:14:12.699604+01:00 heisenberg kernel: [ 2.168065] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4 2023-11-08T17:14:12.699605+01:00 heisenberg kernel: [ 2.168067] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed 2023-11-08T17:14:12.699605+01:00 heisenberg kernel: [ 2.168286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 2023-11-08T17:14:12.699605+01:00 heisenberg kernel: [ 2.168290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:14:12.699606+01:00 heisenberg kernel: [ 2.168292] usb usb3: Product: xHCI Host Controller 2023-11-08T17:14:12.699606+01:00 heisenberg kernel: [ 2.168294] usb usb3: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:14:12.699606+01:00 heisenberg kernel: [ 2.168295] usb usb3: SerialNumber: 0000:00:0d.0 2023-11-08T17:14:12.699610+01:00 heisenberg kernel: [ 2.168375] hub 3-0:1.0: USB hub found 2023-11-08T17:14:12.699610+01:00 heisenberg kernel: [ 2.168385] hub 3-0:1.0: 1 port detected 2023-11-08T17:14:12.699611+01:00 heisenberg kernel: [ 2.168707] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 2023-11-08T17:14:12.699611+01:00 heisenberg kernel: [ 2.168709] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-11-08T17:14:12.699611+01:00 heisenberg kernel: [ 2.168710] usb usb4: Product: xHCI Host Controller 2023-11-08T17:14:12.699612+01:00 heisenberg kernel: [ 2.168712] usb usb4: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd 2023-11-08T17:14:12.699615+01:00 heisenberg kernel: [ 2.168713] usb usb4: SerialNumber: 0000:00:0d.0 2023-11-08T17:14:12.699615+01:00 heisenberg kernel: [ 2.168759] hub 4-0:1.0: USB hub found 2023-11-08T17:14:12.699616+01:00 heisenberg kernel: [ 2.168767] hub 4-0:1.0: 2 ports detected 2023-11-08T17:14:12.699616+01:00 heisenberg kernel: [ 2.309155] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32 2023-11-08T17:14:12.699616+01:00 heisenberg kernel: [ 2.309187] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 2023-11-08T17:14:12.699617+01:00 heisenberg kernel: [ 2.309196] usb 1-5: Product: USB2.0 Hub 2023-11-08T17:14:12.699620+01:00 heisenberg kernel: [ 2.313035] hub 1-5:1.0: USB hub found 2023-11-08T17:14:12.699620+01:00 heisenberg kernel: [ 2.313707] hub 1-5:1.0: 4 ports detected 2023-11-08T17:14:12.699621+01:00 heisenberg kernel: [ 2.449269] usb 1-6: new high-speed USB device number 3 using xhci_hcd 2023-11-08T17:14:12.699621+01:00 heisenberg kernel: [ 2.609839] usb 1-6: New USB device found, idVendor=04f2, idProduct=b704, bcdDevice=33.05 2023-11-08T17:14:12.699621+01:00 heisenberg kernel: [ 2.609877] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699622+01:00 heisenberg kernel: [ 2.609888] usb 1-6: Product: FJ Camera 2023-11-08T17:14:12.699622+01:00 heisenberg kernel: [ 2.609897] usb 1-6: Manufacturer: Chicony 2023-11-08T17:14:12.699625+01:00 heisenberg kernel: [ 2.681199] usb 1-5.2: new full-speed USB device number 4 using xhci_hcd 2023-11-08T17:14:12.699626+01:00 heisenberg kernel: [ 2.797046] usb 1-5.2: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20 2023-11-08T17:14:12.699626+01:00 heisenberg kernel: [ 2.797082] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699627+01:00 heisenberg kernel: [ 2.797093] usb 1-5.2: Product: EMV Smartcard Reader 2023-11-08T17:14:12.699627+01:00 heisenberg kernel: [ 2.797101] usb 1-5.2: Manufacturer: Generic 2023-11-08T17:14:12.699627+01:00 heisenberg kernel: [ 2.913250] usb 1-7: new high-speed USB device number 5 using xhci_hcd 2023-11-08T17:14:12.699630+01:00 heisenberg kernel: [ 3.065213] usb 1-7: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00 2023-11-08T17:14:12.699631+01:00 heisenberg kernel: [ 3.065243] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699631+01:00 heisenberg kernel: [ 3.065252] usb 1-7: Product: Mass Storage Device 2023-11-08T17:14:12.699631+01:00 heisenberg kernel: [ 3.065259] usb 1-7: Manufacturer: JetFlash 2023-11-08T17:14:12.699632+01:00 heisenberg kernel: [ 3.081868] SCSI subsystem initialized 2023-11-08T17:14:12.699632+01:00 heisenberg kernel: [ 3.085069] usb-storage 1-7:1.0: USB Mass Storage device detected 2023-11-08T17:14:12.699633+01:00 heisenberg kernel: [ 3.085135] scsi host0: usb-storage 1-7:1.0 2023-11-08T17:14:12.699687+01:00 heisenberg kernel: [ 3.085191] usbcore: registered new interface driver usb-storage 2023-11-08T17:14:12.699688+01:00 heisenberg kernel: [ 3.197215] usb 1-10: new full-speed USB device number 6 using xhci_hcd 2023-11-08T17:14:12.699689+01:00 heisenberg kernel: [ 3.349372] usb 1-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00 2023-11-08T17:14:12.699689+01:00 heisenberg kernel: [ 3.349401] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2023-11-08T17:14:12.699690+01:00 heisenberg kernel: [ 3.754209] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 2023-11-08T17:14:12.699690+01:00 heisenberg kernel: [ 3.756737] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) 2023-11-08T17:14:12.699694+01:00 heisenberg kernel: [ 3.757113] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1 2023-11-08T17:14:12.699694+01:00 heisenberg kernel: [ 3.759883] fbcon: i915drmfb (fb0) is primary device 2023-11-08T17:14:12.699695+01:00 heisenberg kernel: [ 3.766728] Console: switching to colour frame buffer device 240x67 2023-11-08T17:14:12.699695+01:00 heisenberg kernel: [ 3.786782] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device 2023-11-08T17:14:12.699696+01:00 heisenberg kernel: [ 3.884988] raid6: avx2x4 gen() 41410 MB/s 2023-11-08T17:14:12.699696+01:00 heisenberg kernel: [ 3.952988] raid6: avx2x2 gen() 46183 MB/s 2023-11-08T17:14:12.699700+01:00 heisenberg kernel: [ 4.020988] raid6: avx2x1 gen() 42700 MB/s 2023-11-08T17:14:12.699701+01:00 heisenberg kernel: [ 4.020995] raid6: using algorithm avx2x2 gen() 46183 MB/s 2023-11-08T17:14:12.699701+01:00 heisenberg kernel: [ 4.088988] raid6: .... xor() 30761 MB/s, rmw enabled 2023-11-08T17:14:12.699702+01:00 heisenberg kernel: [ 4.088995] raid6: using avx2x2 recovery algorithm 2023-11-08T17:14:12.699702+01:00 heisenberg kernel: [ 4.090573] xor: automatically using best checksumming function avx 2023-11-08T17:14:12.699702+01:00 heisenberg kernel: [ 4.156182] Btrfs loaded, zoned=yes, fsverity=yes 2023-11-08T17:14:12.699703+01:00 heisenberg kernel: [ 4.201084] usb 1-1: new high-speed USB device number 7 using xhci_hcd 2023-11-08T17:14:12.699706+01:00 heisenberg kernel: [ 4.355845] scsi 0:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4 2023-11-08T17:14:12.699706+01:00 heisenberg kernel: [ 4.364431] sd 0:0:0:0: [sda] 31690752 512-byte logical blocks: (16.2 GB/15.1 GiB) 2023-11-08T17:14:12.699707+01:00 heisenberg kernel: [ 4.364872] sd 0:0:0:0: [sda] Write Protect is off 2023-11-08T17:14:12.699707+01:00 heisenberg kernel: [ 4.364902] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 2023-11-08T17:14:12.699707+01:00 heisenberg kernel: [ 4.365351] sd 0:0:0:0: [sda] No Caching mode page found 2023-11-08T17:14:12.699708+01:00 heisenberg kernel: [ 4.365383] sd 0:0:0:0: [sda] Assuming drive cache: write through 2023-11-08T17:14:12.699711+01:00 heisenberg kernel: [ 4.376365] sda: sda1 sda2 sda3 sda4 sda5 2023-11-08T17:14:12.699711+01:00 heisenberg kernel: [ 4.376454] sd 0:0:0:0: [sda] Attached SCSI removable disk 2023-11-08T17:14:12.699711+01:00 heisenberg kernel: [ 4.384336] async_tx: api initialized (async) 2023-11-08T17:14:12.699712+01:00 heisenberg kernel: [ 4.408194] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. 2023-11-08T17:14:12.699712+01:00 heisenberg kernel: [ 4.408240] device-mapper: uevent: version 1.0.3 2023-11-08T17:14:12.699713+01:00 heisenberg kernel: [ 4.408300] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxx 2023-11-08T17:14:12.699716+01:00 heisenberg kernel: [ 4.421313] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699716+01:00 heisenberg kernel: [ 4.421329] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699716+01:00 heisenberg kernel: [ 4.421340] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699717+01:00 heisenberg kernel: [ 4.421352] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699717+01:00 heisenberg kernel: [ 4.422791] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699718+01:00 heisenberg kernel: [ 4.422844] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699719+01:00 heisenberg kernel: [ 4.596639] BTRFS: device label gss-boot-sys_ devid 1 transid 61 /dev/sda2 scanned by (udev-worker) (254) 2023-11-08T17:14:12.699723+01:00 heisenberg kernel: [ 4.627315] BTRFS: device label gss-boot-data_ devid 1 transid 55 /dev/sda3 scanned by (udev-worker) (271) 2023-11-08T17:14:12.699724+01:00 heisenberg kernel: [ 4.627543] BTRFS: device label system-meta devid 1 transid 22 /dev/nvme0n1p3 scanned by (udev-worker) (268) 2023-11-08T17:14:12.699724+01:00 heisenberg kernel: [ 4.653922] BTRFS: device label gss-boot-rescue_ devid 1 transid 304 /dev/sda5 scanned by (udev-worker) (233) 2023-11-08T17:14:12.699725+01:00 heisenberg kernel: [ 4.655136] BTRFS: device label gss-boot-archive_ devid 1 transid 39 /dev/sda4 scanned by (udev-worker) (242) 2023-11-08T17:14:12.699725+01:00 heisenberg kernel: [ 4.692619] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:14:12.699728+01:00 heisenberg kernel: [ 4.692662] BTRFS info (device sda3): disk space caching is enabled 2023-11-08T17:14:12.699729+01:00 heisenberg kernel: [ 4.717355] BTRFS: device label gss-boot-data_ devid 1 transid 55 /dev/disk/by-label/gss-boot-data_ scanned by mount (493) 2023-11-08T17:14:12.699729+01:00 heisenberg kernel: [ 4.718893] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:14:12.699729+01:00 heisenberg kernel: [ 4.718922] BTRFS info (device sda3): disk space caching is enabled 2023-11-08T17:14:12.699730+01:00 heisenberg kernel: [ 4.794392] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.699730+01:00 heisenberg kernel: [ 4.860147] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.699733+01:00 heisenberg kernel: [ 4.860158] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.699733+01:00 heisenberg kernel: [ 4.989242] usb 1-1.2: new full-speed USB device number 8 using xhci_hcd 2023-11-08T17:14:12.699734+01:00 heisenberg kernel: [ 5.096124] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.699734+01:00 heisenberg kernel: [ 5.096154] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.699735+01:00 heisenberg kernel: [ 5.096165] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.699735+01:00 heisenberg kernel: [ 5.096174] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.699738+01:00 heisenberg kernel: [ 5.096180] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.699739+01:00 heisenberg kernel: [ 5.185284] usb 1-1.4: new high-speed USB device number 9 using xhci_hcd 2023-11-08T17:14:12.699739+01:00 heisenberg kernel: [ 5.287046] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.699739+01:00 heisenberg kernel: [ 5.287076] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699740+01:00 heisenberg kernel: [ 5.287088] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.699740+01:00 heisenberg kernel: [ 5.287096] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.699740+01:00 heisenberg kernel: [ 5.289253] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.699744+01:00 heisenberg kernel: [ 5.289352] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.699745+01:00 heisenberg kernel: [ 5.741733] usb 1-1: USB disconnect, device number 7 2023-11-08T17:14:12.699745+01:00 heisenberg kernel: [ 5.741759] usb 1-1.2: USB disconnect, device number 8 2023-11-08T17:14:12.699746+01:00 heisenberg kernel: [ 5.743537] usb 1-1.4: USB disconnect, device number 9 2023-11-08T17:14:12.699746+01:00 heisenberg kernel: [ 5.838114] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.699746+01:00 heisenberg kernel: [ 5.839006] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.699750+01:00 heisenberg kernel: [ 5.841457] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.699750+01:00 heisenberg kernel: [ 5.844445] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.699751+01:00 heisenberg kernel: [ 5.845382] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.699751+01:00 heisenberg kernel: [ 9.301000] usb 1-1: new high-speed USB device number 10 using xhci_hcd 2023-11-08T17:14:12.699751+01:00 heisenberg kernel: [ 9.518093] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699752+01:00 heisenberg kernel: [ 9.518107] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699755+01:00 heisenberg kernel: [ 9.518112] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699755+01:00 heisenberg kernel: [ 9.518116] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699756+01:00 heisenberg kernel: [ 9.523573] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699756+01:00 heisenberg kernel: [ 9.523629] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699757+01:00 heisenberg kernel: [ 9.888241] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.699757+01:00 heisenberg kernel: [ 9.953268] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.699757+01:00 heisenberg kernel: [ 9.953272] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.699760+01:00 heisenberg kernel: [ 10.073256] usb 1-1.2: new full-speed USB device number 11 using xhci_hcd 2023-11-08T17:14:12.699761+01:00 heisenberg kernel: [ 10.179916] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.699761+01:00 heisenberg kernel: [ 10.179938] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.699762+01:00 heisenberg kernel: [ 10.179946] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.699762+01:00 heisenberg kernel: [ 10.179952] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.699762+01:00 heisenberg kernel: [ 10.179956] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.699765+01:00 heisenberg kernel: [ 10.265260] usb 1-1.4: new high-speed USB device number 12 using xhci_hcd 2023-11-08T17:14:12.699766+01:00 heisenberg kernel: [ 10.370286] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.699766+01:00 heisenberg kernel: [ 10.370319] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699767+01:00 heisenberg kernel: [ 10.370331] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.699767+01:00 heisenberg kernel: [ 10.370339] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.699767+01:00 heisenberg kernel: [ 10.372886] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.699768+01:00 heisenberg kernel: [ 10.373048] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.699771+01:00 heisenberg kernel: [ 10.842369] usb 1-1: USB disconnect, device number 10 2023-11-08T17:14:12.699771+01:00 heisenberg kernel: [ 10.842397] usb 1-1.2: USB disconnect, device number 11 2023-11-08T17:14:12.699772+01:00 heisenberg kernel: [ 10.844425] usb 1-1.4: USB disconnect, device number 12 2023-11-08T17:14:12.699772+01:00 heisenberg kernel: [ 10.931160] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.699772+01:00 heisenberg kernel: [ 10.932736] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.699773+01:00 heisenberg kernel: [ 10.936079] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.699776+01:00 heisenberg kernel: [ 10.937963] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.699776+01:00 heisenberg kernel: [ 10.938554] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.699776+01:00 heisenberg kernel: [ 14.333054] usb 1-1: new high-speed USB device number 13 using xhci_hcd 2023-11-08T17:14:12.699777+01:00 heisenberg kernel: [ 14.549745] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699777+01:00 heisenberg kernel: [ 14.550947] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699778+01:00 heisenberg kernel: [ 14.552142] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699781+01:00 heisenberg kernel: [ 14.553198] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699834+01:00 heisenberg kernel: [ 14.555663] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699835+01:00 heisenberg kernel: [ 14.556789] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699835+01:00 heisenberg kernel: [ 14.978913] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.699835+01:00 heisenberg kernel: [ 15.043063] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.699836+01:00 heisenberg kernel: [ 15.044252] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.699836+01:00 heisenberg kernel: [ 15.097149] usb 1-1.2: new full-speed USB device number 14 using xhci_hcd 2023-11-08T17:14:12.699840+01:00 heisenberg kernel: [ 15.202155] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.699841+01:00 heisenberg kernel: [ 15.203360] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.699841+01:00 heisenberg kernel: [ 15.204541] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.699841+01:00 heisenberg kernel: [ 15.205626] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.699842+01:00 heisenberg kernel: [ 15.206639] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.699842+01:00 heisenberg kernel: [ 15.293149] usb 1-1.4: new high-speed USB device number 15 using xhci_hcd 2023-11-08T17:14:12.699847+01:00 heisenberg kernel: [ 15.395133] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.699848+01:00 heisenberg kernel: [ 15.396304] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699849+01:00 heisenberg kernel: [ 15.397476] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.699849+01:00 heisenberg kernel: [ 15.398569] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.699849+01:00 heisenberg kernel: [ 15.401088] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.699850+01:00 heisenberg kernel: [ 15.402100] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.699850+01:00 heisenberg kernel: [ 15.942306] usb 1-1: USB disconnect, device number 13 2023-11-08T17:14:12.699853+01:00 heisenberg kernel: [ 15.943431] usb 1-1.2: USB disconnect, device number 14 2023-11-08T17:14:12.699854+01:00 heisenberg kernel: [ 15.945518] usb 1-1.4: USB disconnect, device number 15 2023-11-08T17:14:12.699854+01:00 heisenberg kernel: [ 16.021498] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.699855+01:00 heisenberg kernel: [ 16.022864] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.699855+01:00 heisenberg kernel: [ 16.025487] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.699855+01:00 heisenberg kernel: [ 16.027165] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.699860+01:00 heisenberg kernel: [ 16.028418] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.699860+01:00 heisenberg kernel: [ 19.501056] usb 1-1: new high-speed USB device number 16 using xhci_hcd 2023-11-08T17:14:12.699860+01:00 heisenberg kernel: [ 19.717711] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699861+01:00 heisenberg kernel: [ 19.718874] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699861+01:00 heisenberg kernel: [ 19.720048] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699862+01:00 heisenberg kernel: [ 19.721086] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699865+01:00 heisenberg kernel: [ 19.723520] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699865+01:00 heisenberg kernel: [ 19.724714] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699866+01:00 heisenberg kernel: [ 20.088626] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.699866+01:00 heisenberg kernel: [ 20.152665] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.699867+01:00 heisenberg kernel: [ 20.153823] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.699867+01:00 heisenberg kernel: [ 20.281123] usb 1-1.2: new full-speed USB device number 17 using xhci_hcd 2023-11-08T17:14:12.699867+01:00 heisenberg kernel: [ 20.386051] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.699871+01:00 heisenberg kernel: [ 20.387219] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.699871+01:00 heisenberg kernel: [ 20.388375] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.699871+01:00 heisenberg kernel: [ 20.389527] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.699872+01:00 heisenberg kernel: [ 20.390536] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.699872+01:00 heisenberg kernel: [ 20.477132] usb 1-1.4: new high-speed USB device number 18 using xhci_hcd 2023-11-08T17:14:12.699873+01:00 heisenberg kernel: [ 20.579209] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.699876+01:00 heisenberg kernel: [ 20.580328] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699876+01:00 heisenberg kernel: [ 20.581422] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.699877+01:00 heisenberg kernel: [ 20.582476] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.699877+01:00 heisenberg kernel: [ 20.584734] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.699877+01:00 heisenberg kernel: [ 20.585747] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.699878+01:00 heisenberg kernel: [ 21.042671] usb 1-1: USB disconnect, device number 16 2023-11-08T17:14:12.699878+01:00 heisenberg kernel: [ 21.043767] usb 1-1.2: USB disconnect, device number 17 2023-11-08T17:14:12.699881+01:00 heisenberg kernel: [ 21.045746] usb 1-1.4: USB disconnect, device number 18 2023-11-08T17:14:12.699882+01:00 heisenberg kernel: [ 21.129399] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.699882+01:00 heisenberg kernel: [ 21.130691] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.699882+01:00 heisenberg kernel: [ 21.133211] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.699883+01:00 heisenberg kernel: [ 21.134898] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.699883+01:00 heisenberg kernel: [ 21.136066] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.699886+01:00 heisenberg kernel: [ 24.593028] usb 1-1: new high-speed USB device number 19 using xhci_hcd 2023-11-08T17:14:12.699887+01:00 heisenberg kernel: [ 24.809719] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699887+01:00 heisenberg kernel: [ 24.810711] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699887+01:00 heisenberg kernel: [ 24.811697] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699888+01:00 heisenberg kernel: [ 24.812639] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699888+01:00 heisenberg kernel: [ 24.814934] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699891+01:00 heisenberg kernel: [ 24.815880] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699892+01:00 heisenberg kernel: [ 25.179842] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.699892+01:00 heisenberg kernel: [ 25.245125] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.699892+01:00 heisenberg kernel: [ 25.246033] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.699893+01:00 heisenberg kernel: [ 25.369039] usb 1-1.2: new full-speed USB device number 20 using xhci_hcd 2023-11-08T17:14:12.699893+01:00 heisenberg kernel: [ 25.474288] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.699894+01:00 heisenberg kernel: [ 25.475212] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.699897+01:00 heisenberg kernel: [ 25.476141] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.699897+01:00 heisenberg kernel: [ 25.477053] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.699898+01:00 heisenberg kernel: [ 25.477941] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.699898+01:00 heisenberg kernel: [ 25.565048] usb 1-1.4: new high-speed USB device number 21 using xhci_hcd 2023-11-08T17:14:12.699898+01:00 heisenberg kernel: [ 25.669616] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.699899+01:00 heisenberg kernel: [ 25.670526] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699902+01:00 heisenberg kernel: [ 25.671422] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.699903+01:00 heisenberg kernel: [ 25.672319] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.699903+01:00 heisenberg kernel: [ 25.674633] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.699903+01:00 heisenberg kernel: [ 25.675590] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.699904+01:00 heisenberg kernel: [ 26.142924] usb 1-1: USB disconnect, device number 19 2023-11-08T17:14:12.699904+01:00 heisenberg kernel: [ 26.143810] usb 1-1.2: USB disconnect, device number 20 2023-11-08T17:14:12.699904+01:00 heisenberg kernel: [ 26.145581] usb 1-1.4: USB disconnect, device number 21 2023-11-08T17:14:12.699908+01:00 heisenberg kernel: [ 26.221767] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.699909+01:00 heisenberg kernel: [ 26.222990] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.699909+01:00 heisenberg kernel: [ 26.225810] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.699909+01:00 heisenberg kernel: [ 26.227329] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.699910+01:00 heisenberg kernel: [ 26.228392] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.699910+01:00 heisenberg kernel: [ 29.901001] usb 1-1: new high-speed USB device number 22 using xhci_hcd 2023-11-08T17:14:12.699914+01:00 heisenberg kernel: [ 30.117773] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699914+01:00 heisenberg kernel: [ 30.118702] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699914+01:00 heisenberg kernel: [ 30.119624] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699915+01:00 heisenberg kernel: [ 30.120552] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699915+01:00 heisenberg kernel: [ 30.122921] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699915+01:00 heisenberg kernel: [ 30.123890] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699919+01:00 heisenberg kernel: [ 30.278411] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.699919+01:00 heisenberg kernel: [ 30.343717] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.699920+01:00 heisenberg kernel: [ 30.344640] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.699920+01:00 heisenberg kernel: [ 30.681134] usb 1-1.2: new full-speed USB device number 23 using xhci_hcd 2023-11-08T17:14:12.699921+01:00 heisenberg kernel: [ 30.785813] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.699921+01:00 heisenberg kernel: [ 30.786763] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.699921+01:00 heisenberg kernel: [ 30.787696] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.699925+01:00 heisenberg kernel: [ 30.788640] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.699925+01:00 heisenberg kernel: [ 30.789560] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.699926+01:00 heisenberg kernel: [ 30.877022] usb 1-1.4: new high-speed USB device number 24 using xhci_hcd 2023-11-08T17:14:12.699926+01:00 heisenberg kernel: [ 30.978395] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.699926+01:00 heisenberg kernel: [ 30.979328] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699927+01:00 heisenberg kernel: [ 30.980249] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.699930+01:00 heisenberg kernel: [ 30.981176] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.699931+01:00 heisenberg kernel: [ 30.983501] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.699931+01:00 heisenberg kernel: [ 30.984473] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.699931+01:00 heisenberg kernel: [ 31.243162] usb 1-1: USB disconnect, device number 22 2023-11-08T17:14:12.699932+01:00 heisenberg kernel: [ 31.244075] usb 1-1.2: USB disconnect, device number 23 2023-11-08T17:14:12.699932+01:00 heisenberg kernel: [ 31.245894] usb 1-1.4: USB disconnect, device number 24 2023-11-08T17:14:12.699932+01:00 heisenberg kernel: [ 31.321717] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.699936+01:00 heisenberg kernel: [ 31.322966] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.699936+01:00 heisenberg kernel: [ 31.325787] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.699988+01:00 heisenberg kernel: [ 31.327297] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.699989+01:00 heisenberg kernel: [ 31.328388] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.699989+01:00 heisenberg kernel: [ 34.793059] usb 1-1: new high-speed USB device number 25 using xhci_hcd 2023-11-08T17:14:12.699989+01:00 heisenberg kernel: [ 34.941888] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.699994+01:00 heisenberg kernel: [ 34.942819] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.699995+01:00 heisenberg kernel: [ 34.943740] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.699995+01:00 heisenberg kernel: [ 34.944677] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.699996+01:00 heisenberg kernel: [ 34.947086] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.699996+01:00 heisenberg kernel: [ 34.948137] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.699996+01:00 heisenberg kernel: [ 35.377822] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700000+01:00 heisenberg kernel: [ 35.444074] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700000+01:00 heisenberg kernel: [ 35.445007] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700001+01:00 heisenberg kernel: [ 35.513017] usb 1-1.2: new full-speed USB device number 26 using xhci_hcd 2023-11-08T17:14:12.700001+01:00 heisenberg kernel: [ 35.618157] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700001+01:00 heisenberg kernel: [ 35.619115] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700002+01:00 heisenberg kernel: [ 35.620051] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700002+01:00 heisenberg kernel: [ 35.620979] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700005+01:00 heisenberg kernel: [ 35.621873] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700006+01:00 heisenberg kernel: [ 35.709040] usb 1-1.4: new high-speed USB device number 27 using xhci_hcd 2023-11-08T17:14:12.700006+01:00 heisenberg kernel: [ 35.813764] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700007+01:00 heisenberg kernel: [ 35.814692] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700007+01:00 heisenberg kernel: [ 35.815612] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700007+01:00 heisenberg kernel: [ 35.816529] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700010+01:00 heisenberg kernel: [ 35.818891] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700011+01:00 heisenberg kernel: [ 35.819859] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700011+01:00 heisenberg kernel: [ 36.343420] usb 1-1: USB disconnect, device number 25 2023-11-08T17:14:12.700011+01:00 heisenberg kernel: [ 36.344339] usb 1-1.2: USB disconnect, device number 26 2023-11-08T17:14:12.700012+01:00 heisenberg kernel: [ 36.346132] usb 1-1.4: USB disconnect, device number 27 2023-11-08T17:14:12.700012+01:00 heisenberg kernel: [ 36.421597] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700012+01:00 heisenberg kernel: [ 36.422891] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700015+01:00 heisenberg kernel: [ 36.425365] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700016+01:00 heisenberg kernel: [ 36.427911] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700016+01:00 heisenberg kernel: [ 36.429013] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700016+01:00 heisenberg kernel: [ 39.893051] usb 1-1: new high-speed USB device number 28 using xhci_hcd 2023-11-08T17:14:12.700017+01:00 heisenberg kernel: [ 40.109502] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.700017+01:00 heisenberg kernel: [ 40.110437] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700020+01:00 heisenberg kernel: [ 40.111371] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.700021+01:00 heisenberg kernel: [ 40.112318] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.700021+01:00 heisenberg kernel: [ 40.114671] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.700021+01:00 heisenberg kernel: [ 40.115644] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.700022+01:00 heisenberg kernel: [ 40.476254] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700022+01:00 heisenberg kernel: [ 40.541213] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700025+01:00 heisenberg kernel: [ 40.542156] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700025+01:00 heisenberg kernel: [ 40.669038] usb 1-1.2: new full-speed USB device number 29 using xhci_hcd 2023-11-08T17:14:12.700026+01:00 heisenberg kernel: [ 40.774213] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700026+01:00 heisenberg kernel: [ 40.775163] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700027+01:00 heisenberg kernel: [ 40.776110] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700027+01:00 heisenberg kernel: [ 40.777059] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700027+01:00 heisenberg kernel: [ 40.777968] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700030+01:00 heisenberg kernel: [ 40.865039] usb 1-1.4: new high-speed USB device number 30 using xhci_hcd 2023-11-08T17:14:12.700031+01:00 heisenberg kernel: [ 40.966365] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700031+01:00 heisenberg kernel: [ 40.967298] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700031+01:00 heisenberg kernel: [ 40.968217] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700032+01:00 heisenberg kernel: [ 40.969147] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700032+01:00 heisenberg kernel: [ 40.971495] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700035+01:00 heisenberg kernel: [ 40.972467] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700035+01:00 heisenberg kernel: [ 41.443872] usb 1-1: USB disconnect, device number 28 2023-11-08T17:14:12.700036+01:00 heisenberg kernel: [ 41.444783] usb 1-1.2: USB disconnect, device number 29 2023-11-08T17:14:12.700036+01:00 heisenberg kernel: [ 41.446615] usb 1-1.4: USB disconnect, device number 30 2023-11-08T17:14:12.700036+01:00 heisenberg kernel: [ 41.517531] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700037+01:00 heisenberg kernel: [ 41.518820] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700037+01:00 heisenberg kernel: [ 41.521390] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700040+01:00 heisenberg kernel: [ 41.523844] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700041+01:00 heisenberg kernel: [ 41.524949] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700041+01:00 heisenberg kernel: [ 45.005003] usb 1-1: new high-speed USB device number 31 using xhci_hcd 2023-11-08T17:14:12.700041+01:00 heisenberg kernel: [ 45.221667] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.700042+01:00 heisenberg kernel: [ 45.222600] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700042+01:00 heisenberg kernel: [ 45.223526] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.700045+01:00 heisenberg kernel: [ 45.224460] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.700046+01:00 heisenberg kernel: [ 45.226811] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.700046+01:00 heisenberg kernel: [ 45.227842] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.700047+01:00 heisenberg kernel: [ 45.595021] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700047+01:00 heisenberg kernel: [ 45.660318] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700047+01:00 heisenberg kernel: [ 45.661247] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700051+01:00 heisenberg kernel: [ 45.785127] usb 1-1.2: new full-speed USB device number 32 using xhci_hcd 2023-11-08T17:14:12.700051+01:00 heisenberg kernel: [ 45.890463] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700052+01:00 heisenberg kernel: [ 45.891413] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700052+01:00 heisenberg kernel: [ 45.892358] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700052+01:00 heisenberg kernel: [ 45.893299] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700053+01:00 heisenberg kernel: [ 45.894215] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700053+01:00 heisenberg kernel: [ 45.981039] usb 1-1.4: new high-speed USB device number 33 using xhci_hcd 2023-11-08T17:14:12.700056+01:00 heisenberg kernel: [ 46.086806] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700057+01:00 heisenberg kernel: [ 46.087746] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700057+01:00 heisenberg kernel: [ 46.088671] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700057+01:00 heisenberg kernel: [ 46.089594] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700058+01:00 heisenberg kernel: [ 46.091989] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700058+01:00 heisenberg kernel: [ 46.092976] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700061+01:00 heisenberg kernel: [ 46.544163] usb 1-1: USB disconnect, device number 31 2023-11-08T17:14:12.700062+01:00 heisenberg kernel: [ 46.545087] usb 1-1.2: USB disconnect, device number 32 2023-11-08T17:14:12.700062+01:00 heisenberg kernel: [ 46.546940] usb 1-1.4: USB disconnect, device number 33 2023-11-08T17:14:12.700062+01:00 heisenberg kernel: [ 46.637544] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700063+01:00 heisenberg kernel: [ 46.638826] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700063+01:00 heisenberg kernel: [ 46.641588] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700063+01:00 heisenberg kernel: [ 46.643094] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700067+01:00 heisenberg kernel: [ 46.644181] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700068+01:00 heisenberg kernel: [ 50.301029] usb 1-1: new high-speed USB device number 34 using xhci_hcd 2023-11-08T17:14:12.700068+01:00 heisenberg kernel: [ 50.517790] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.700068+01:00 heisenberg kernel: [ 50.518710] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700069+01:00 heisenberg kernel: [ 50.519643] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.700069+01:00 heisenberg kernel: [ 50.520580] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.700074+01:00 heisenberg kernel: [ 50.522948] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.700074+01:00 heisenberg kernel: [ 50.523927] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.700075+01:00 heisenberg kernel: [ 50.664671] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700075+01:00 heisenberg kernel: [ 50.730933] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700076+01:00 heisenberg kernel: [ 50.731855] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700076+01:00 heisenberg kernel: [ 51.065143] usb 1-1.2: new full-speed USB device number 35 using xhci_hcd 2023-11-08T17:14:12.700079+01:00 heisenberg kernel: [ 51.173996] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700080+01:00 heisenberg kernel: [ 51.174940] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700080+01:00 heisenberg kernel: [ 51.175874] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700081+01:00 heisenberg kernel: [ 51.176808] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700081+01:00 heisenberg kernel: [ 51.177729] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700081+01:00 heisenberg kernel: [ 51.265125] usb 1-1.4: new high-speed USB device number 36 using xhci_hcd 2023-11-08T17:14:12.700082+01:00 heisenberg kernel: [ 51.366389] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700085+01:00 heisenberg kernel: [ 51.367314] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700086+01:00 heisenberg kernel: [ 51.368231] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700086+01:00 heisenberg kernel: [ 51.369149] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700086+01:00 heisenberg kernel: [ 51.371290] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700135+01:00 heisenberg kernel: [ 51.372435] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700136+01:00 heisenberg kernel: [ 51.644170] usb 1-1: USB disconnect, device number 34 2023-11-08T17:14:12.700140+01:00 heisenberg kernel: [ 51.645086] usb 1-1.2: USB disconnect, device number 35 2023-11-08T17:14:12.700140+01:00 heisenberg kernel: [ 51.646924] usb 1-1.4: USB disconnect, device number 36 2023-11-08T17:14:12.700141+01:00 heisenberg kernel: [ 51.709522] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700141+01:00 heisenberg kernel: [ 51.710774] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700142+01:00 heisenberg kernel: [ 51.713306] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700142+01:00 heisenberg kernel: [ 51.714972] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700142+01:00 heisenberg kernel: [ 51.716075] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700146+01:00 heisenberg kernel: [ 55.193001] usb 1-1: new high-speed USB device number 37 using xhci_hcd 2023-11-08T17:14:12.700146+01:00 heisenberg kernel: [ 55.341767] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.700147+01:00 heisenberg kernel: [ 55.342708] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700147+01:00 heisenberg kernel: [ 55.343636] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.700147+01:00 heisenberg kernel: [ 55.344568] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.700148+01:00 heisenberg kernel: [ 55.346913] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.700151+01:00 heisenberg kernel: [ 55.347879] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.700151+01:00 heisenberg kernel: [ 55.758592] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700152+01:00 heisenberg kernel: [ 55.822612] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700152+01:00 heisenberg kernel: [ 55.823535] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700153+01:00 heisenberg kernel: [ 55.897137] usb 1-1.2: new full-speed USB device number 38 using xhci_hcd 2023-11-08T17:14:12.700153+01:00 heisenberg kernel: [ 56.002024] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700156+01:00 heisenberg kernel: [ 56.002962] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700157+01:00 heisenberg kernel: [ 56.003897] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700157+01:00 heisenberg kernel: [ 56.004829] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700158+01:00 heisenberg kernel: [ 56.005748] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700158+01:00 heisenberg kernel: [ 56.093132] usb 1-1.4: new high-speed USB device number 39 using xhci_hcd 2023-11-08T17:14:12.700158+01:00 heisenberg kernel: [ 56.194366] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700159+01:00 heisenberg kernel: [ 56.195303] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700162+01:00 heisenberg kernel: [ 56.196225] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700162+01:00 heisenberg kernel: [ 56.197155] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700163+01:00 heisenberg kernel: [ 56.199289] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700163+01:00 heisenberg kernel: [ 56.200258] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700164+01:00 heisenberg kernel: [ 56.744671] usb 1-1: USB disconnect, device number 37 2023-11-08T17:14:12.700164+01:00 heisenberg kernel: [ 56.745584] usb 1-1.2: USB disconnect, device number 38 2023-11-08T17:14:12.700167+01:00 heisenberg kernel: [ 56.747408] usb 1-1.4: USB disconnect, device number 39 2023-11-08T17:14:12.700168+01:00 heisenberg kernel: [ 56.801722] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700168+01:00 heisenberg kernel: [ 56.803047] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700168+01:00 heisenberg kernel: [ 56.805914] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700169+01:00 heisenberg kernel: [ 56.807465] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700169+01:00 heisenberg kernel: [ 56.808579] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700169+01:00 heisenberg kernel: [ 60.292999] usb 1-1: new high-speed USB device number 40 using xhci_hcd 2023-11-08T17:14:12.700173+01:00 heisenberg kernel: [ 60.509745] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.700173+01:00 heisenberg kernel: [ 60.510673] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700174+01:00 heisenberg kernel: [ 60.511596] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.700174+01:00 heisenberg kernel: [ 60.512539] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.700174+01:00 heisenberg kernel: [ 60.514913] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.700175+01:00 heisenberg kernel: [ 60.515888] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.700178+01:00 heisenberg kernel: [ 60.877622] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700178+01:00 heisenberg kernel: [ 60.943749] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700179+01:00 heisenberg kernel: [ 60.944675] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700179+01:00 heisenberg kernel: [ 61.081124] usb 1-1.2: new full-speed USB device number 41 using xhci_hcd 2023-11-08T17:14:12.700180+01:00 heisenberg kernel: [ 61.186024] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700180+01:00 heisenberg kernel: [ 61.186976] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700183+01:00 heisenberg kernel: [ 61.187915] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700184+01:00 heisenberg kernel: [ 61.188859] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700184+01:00 heisenberg kernel: [ 61.189781] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700184+01:00 heisenberg kernel: [ 61.277040] usb 1-1.4: new high-speed USB device number 42 using xhci_hcd 2023-11-08T17:14:12.700185+01:00 heisenberg kernel: [ 61.382369] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700185+01:00 heisenberg kernel: [ 61.383291] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700186+01:00 heisenberg kernel: [ 61.384209] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700189+01:00 heisenberg kernel: [ 61.385132] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700189+01:00 heisenberg kernel: [ 61.387488] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700190+01:00 heisenberg kernel: [ 61.388474] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700190+01:00 heisenberg kernel: [ 61.844914] usb 1-1: USB disconnect, device number 40 2023-11-08T17:14:12.700190+01:00 heisenberg kernel: [ 61.845833] usb 1-1.2: USB disconnect, device number 41 2023-11-08T17:14:12.700191+01:00 heisenberg kernel: [ 61.847680] usb 1-1.4: USB disconnect, device number 42 2023-11-08T17:14:12.700194+01:00 heisenberg kernel: [ 61.921776] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700194+01:00 heisenberg kernel: [ 61.923095] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700195+01:00 heisenberg kernel: [ 61.925800] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700195+01:00 heisenberg kernel: [ 61.927374] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700195+01:00 heisenberg kernel: [ 61.928472] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700196+01:00 heisenberg kernel: [ 65.396995] usb 1-1: new high-speed USB device number 43 using xhci_hcd 2023-11-08T17:14:12.700196+01:00 heisenberg kernel: [ 65.583924] BTRFS: device label system devid 1 transid 415332 /dev/dm-0 scanned by (udev-worker) (2132) 2023-11-08T17:14:12.700200+01:00 heisenberg kernel: [ 65.613341] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:12.700200+01:00 heisenberg kernel: [ 65.615122] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700200+01:00 heisenberg kernel: [ 65.616908] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:12.700201+01:00 heisenberg kernel: [ 65.618495] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:12.700201+01:00 heisenberg kernel: [ 65.621109] hub 1-1:1.0: USB hub found 2023-11-08T17:14:12.700202+01:00 heisenberg kernel: [ 65.622510] hub 1-1:1.0: 6 ports detected 2023-11-08T17:14:12.700206+01:00 heisenberg kernel: [ 65.885572] BTRFS: device label gss-boot-data_ devid 1 transid 55 /dev/sda3 scanned by btrfs (2144) 2023-11-08T17:14:12.700207+01:00 heisenberg kernel: [ 65.916394] PM: Image not found (code -22) 2023-11-08T17:14:12.700207+01:00 heisenberg kernel: [ 65.939329] BTRFS info (device dm-0): using crc32c (crc32c-intel) checksum algorithm 2023-11-08T17:14:12.700207+01:00 heisenberg kernel: [ 65.940064] BTRFS info (device dm-0): using free space tree 2023-11-08T17:14:12.700208+01:00 heisenberg kernel: [ 65.962529] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:12.700210+01:00 heisenberg kernel: [ 66.028873] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:12.700213+01:00 heisenberg kernel: [ 66.030904] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:12.700214+01:00 heisenberg kernel: [ 66.097437] BTRFS info (device dm-0): enabling ssd optimizations 2023-11-08T17:14:12.700214+01:00 heisenberg kernel: [ 66.145242] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. 2023-11-08T17:14:12.700215+01:00 heisenberg kernel: [ 66.169137] usb 1-1.2: new full-speed USB device number 44 using xhci_hcd 2023-11-08T17:14:12.700215+01:00 heisenberg kernel: [ 66.274015] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5220, bcdDevice=17.46 2023-11-08T17:14:12.700216+01:00 heisenberg kernel: [ 66.274832] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-11-08T17:14:12.700219+01:00 heisenberg kernel: [ 66.275640] usb 1-1.2: Product: DMC Device 2023-11-08T17:14:12.700219+01:00 heisenberg kernel: [ 66.276445] usb 1-1.2: Manufacturer: FCCL 2023-11-08T17:14:12.700220+01:00 heisenberg kernel: [ 66.277244] usb 1-1.2: SerialNumber: 11AD1D0A1F61400836340B00 2023-11-08T17:14:12.700220+01:00 heisenberg kernel: [ 66.365054] usb 1-1.4: new high-speed USB device number 45 using xhci_hcd 2023-11-08T17:14:12.700221+01:00 heisenberg kernel: [ 66.474895] usb 1-1.4: New USB device found, idVendor=0424, idProduct=4252, bcdDevice= 6.30 2023-11-08T17:14:12.700221+01:00 heisenberg kernel: [ 66.474898] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:12.700265+01:00 heisenberg kernel: [ 66.474899] usb 1-1.4: Product: USB4252 Smart Hub 2023-11-08T17:14:12.700282+01:00 heisenberg kernel: [ 66.474900] usb 1-1.4: Manufacturer: Microchip 2023-11-08T17:14:12.700283+01:00 heisenberg kernel: [ 66.476222] hub 1-1.4:1.0: USB hub found 2023-11-08T17:14:12.700284+01:00 heisenberg kernel: [ 66.478350] hub 1-1.4:1.0: 5 ports detected 2023-11-08T17:14:12.700286+01:00 heisenberg kernel: [ 66.538882] pstore: Using crash dump compression: deflate 2023-11-08T17:14:12.700287+01:00 heisenberg kernel: [ 66.558250] fuse: init (API version 7.38) 2023-11-08T17:14:12.700287+01:00 heisenberg kernel: [ 66.567039] loop: module loaded 2023-11-08T17:14:12.700288+01:00 heisenberg kernel: [ 66.570804] lp: driver loaded but no devices found 2023-11-08T17:14:12.700288+01:00 heisenberg kernel: [ 66.577480] ppdev: user-space parallel port driver 2023-11-08T17:14:12.700289+01:00 heisenberg kernel: [ 66.604084] pstore: Registered efi_pstore as persistent store backend 2023-11-08T17:14:12.700290+01:00 heisenberg kernel: [ 66.731891] BTRFS info: devid 1 device path /dev/mapper/system changed to /dev/dm-0 scanned by (udev-worker) (2308) 2023-11-08T17:14:12.700336+01:00 heisenberg kernel: [ 66.734306] BTRFS info: devid 1 device path /dev/dm-0 changed to /dev/mapper/system scanned by (udev-worker) (2308) 2023-11-08T17:14:12.700337+01:00 heisenberg kernel: [ 66.739960] ACPI: AC: AC Adapter [AC] (on-line) 2023-11-08T17:14:12.700338+01:00 heisenberg kernel: [ 66.747257] usbcore: registered new interface driver uas 2023-11-08T17:14:12.700338+01:00 heisenberg kernel: [ 66.759850] intel_pmc_core INT33A1:00: initialized 2023-11-08T17:14:12.700338+01:00 heisenberg kernel: [ 66.762967] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] 2023-11-08T17:14:12.700339+01:00 heisenberg kernel: [ 66.770640] ACPI: \_SB_.FEXT: BTNI: [0x10001] 2023-11-08T17:14:12.700339+01:00 heisenberg kernel: [ 66.772532] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input3 2023-11-08T17:14:12.700340+01:00 heisenberg kernel: [ 66.773746] Consider using thermal netlink events interface 2023-11-08T17:14:12.700340+01:00 heisenberg kernel: [ 66.773905] input: Intel HID events as /devices/platform/INTC1070:00/input/input2 2023-11-08T17:14:12.700341+01:00 heisenberg kernel: [ 66.774099] intel-hid INTC1070:00: platform supports 5 button array 2023-11-08T17:14:12.700341+01:00 heisenberg kernel: [ 66.780746] fujitsu_laptop: driver 0.6.0 successfully loaded 2023-11-08T17:14:12.700342+01:00 heisenberg kernel: [ 66.781424] input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input4 2023-11-08T17:14:12.700342+01:00 heisenberg kernel: [ 66.785493] intel-hid INTC1070:00: failed to get button capability 2023-11-08T17:14:12.700342+01:00 heisenberg kernel: [ 66.786736] intel-hid INTC1070:00: failed to enable HID power button 2023-11-08T17:14:12.700343+01:00 heisenberg kernel: [ 66.794640] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 2023-11-08T17:14:12.700343+01:00 heisenberg kernel: [ 66.798948] hid: raw HID events driver (C) Jiri Kosina 2023-11-08T17:14:12.700344+01:00 heisenberg kernel: [ 66.801995] sd 0:0:0:0: Attached scsi generic sg0 type 0 2023-11-08T17:14:12.700344+01:00 heisenberg kernel: [ 66.803322] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff] 2023-11-08T17:14:12.700345+01:00 heisenberg kernel: [ 66.804589] caller igen6_probe+0x1a0/0x8d0 [igen6_edac] mapping multiple BARs 2023-11-08T17:14:12.700345+01:00 heisenberg kernel: [ 66.806152] ACPI: button: Power Button [PWRB] 2023-11-08T17:14:12.700346+01:00 heisenberg kernel: [ 66.809155] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 2023-11-08T17:14:12.700346+01:00 heisenberg kernel: [ 66.816972] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) 2023-11-08T17:14:12.700347+01:00 heisenberg kernel: [ 66.818506] ACPI: button: Lid Switch [LID] 2023-11-08T17:14:12.700347+01:00 heisenberg kernel: [ 66.843537] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) 2023-11-08T17:14:12.700348+01:00 heisenberg kernel: [ 66.844482] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR 2023-11-08T17:14:12.700348+01:00 heisenberg kernel: [ 66.844485] EDAC igen6 MC1: ADDR 0x7fffffffe0 2023-11-08T17:14:12.700349+01:00 heisenberg kernel: [ 66.844487] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR 2023-11-08T17:14:12.700349+01:00 heisenberg kernel: [ 66.844488] EDAC igen6 MC0: ADDR 0x7fffffffe0 2023-11-08T17:14:12.700350+01:00 heisenberg kernel: [ 66.845029] EDAC igen6: v2.5.1 2023-11-08T17:14:12.700350+01:00 heisenberg kernel: [ 66.862716] ACPI Warning: \_SB.CMB1._BIX: Return Package is too small - found 20 elements, expected 21 (20230331/nsprepkg-649) 2023-11-08T17:14:12.700350+01:00 heisenberg kernel: [ 66.866527] input: PC Speaker as /devices/platform/pcspkr/input/input7 2023-11-08T17:14:12.700351+01:00 heisenberg kernel: [ 66.869016] ACPI: battery: Slot [CMB1] (battery present) 2023-11-08T17:14:12.700351+01:00 heisenberg kernel: [ 66.881336] mc: Linux media interface: v0.10 2023-11-08T17:14:12.700352+01:00 heisenberg kernel: [ 66.883065] mei_me 0000:00:16.0: enabling device (0000 -> 0002) 2023-11-08T17:14:12.700352+01:00 heisenberg kernel: [ 66.883382] i801_smbus 0000:00:1f.4: SPD Write Disable is set 2023-11-08T17:14:12.700352+01:00 heisenberg kernel: [ 66.884916] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt 2023-11-08T17:14:12.700353+01:00 heisenberg kernel: [ 66.893448] i2c i2c-14: 2/8 memory slots populated (from DMI) 2023-11-08T17:14:12.700353+01:00 heisenberg kernel: [ 66.894784] i2c i2c-14: Systems with more than 4 memory slots not supported yet, not instantiating SPD 2023-11-08T17:14:12.700354+01:00 heisenberg kernel: [ 66.904724] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) 2023-11-08T17:14:12.700354+01:00 heisenberg kernel: [ 66.905140] idma64 idma64.0: Found Intel integrated DMA 64-bit 2023-11-08T17:14:12.700355+01:00 heisenberg kernel: [ 66.925019] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006) 2023-11-08T17:14:12.700355+01:00 heisenberg kernel: [ 66.925522] idma64 idma64.1: Found Intel integrated DMA 64-bit 2023-11-08T17:14:12.700355+01:00 heisenberg kernel: [ 66.929259] sdhci: Secure Digital Host Controller Interface driver 2023-11-08T17:14:12.700356+01:00 heisenberg kernel: [ 66.929261] sdhci: Copyright(c) Pierre Ossman 2023-11-08T17:14:12.700356+01:00 heisenberg kernel: [ 66.932687] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) 2023-11-08T17:14:12.700357+01:00 heisenberg kernel: [ 66.944905] usb 1-1: USB disconnect, device number 43 2023-11-08T17:14:12.700357+01:00 heisenberg kernel: [ 66.944909] usb 1-1.2: USB disconnect, device number 44 2023-11-08T17:14:12.700358+01:00 heisenberg kernel: [ 66.953753] intel_rapl_msr: PL4 support detected. 2023-11-08T17:14:12.700358+01:00 heisenberg kernel: [ 66.953829] intel_rapl_common: Found RAPL domain package 2023-11-08T17:14:12.700358+01:00 heisenberg kernel: [ 66.955343] intel_rapl_common: Found RAPL domain core 2023-11-08T17:14:12.700359+01:00 heisenberg kernel: [ 66.955344] intel_rapl_common: Found RAPL domain uncore 2023-11-08T17:14:12.700359+01:00 heisenberg kernel: [ 66.955345] intel_rapl_common: Found RAPL domain psys 2023-11-08T17:14:12.700360+01:00 heisenberg kernel: [ 66.955348] intel_rapl_common: package-0:package:long_term locked by BIOS 2023-11-08T17:14:12.700360+01:00 heisenberg kernel: [ 66.958768] intel_rapl_common: package-0:package:short_term locked by BIOS 2023-11-08T17:14:12.700360+01:00 heisenberg kernel: [ 66.961051] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006) 2023-11-08T17:14:12.700361+01:00 heisenberg kernel: [ 66.972483] sdhci-pci 0000:59:00.0: SDHCI controller found [1217:8621] (rev 1) 2023-11-08T17:14:12.700361+01:00 heisenberg kernel: [ 66.972886] cfg80211: Loading compiled-in X.509 certificates for regulatory database 2023-11-08T17:14:12.700362+01:00 heisenberg kernel: [ 66.974957] Loaded X.509 cert 'benh@xxxxxxxxxx: 577e021cb980e0e820821ba7b54b4961b8b4fadf' 2023-11-08T17:14:12.700362+01:00 heisenberg kernel: [ 66.975482] sdhci-pci 0000:59:00.0: enabling device (0000 -> 0002) 2023-11-08T17:14:12.700363+01:00 heisenberg kernel: [ 66.976457] Loaded X.509 cert 'romain.perier@xxxxxxxxx: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' 2023-11-08T17:14:12.700363+01:00 heisenberg kernel: [ 66.978627] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 2023-11-08T17:14:12.700364+01:00 heisenberg kernel: [ 66.978887] usb 1-1.4: USB disconnect, device number 45 2023-11-08T17:14:12.700364+01:00 heisenberg kernel: [ 66.979290] idma64 idma64.2: Found Intel integrated DMA 64-bit 2023-11-08T17:14:12.700365+01:00 heisenberg kernel: [ 66.979854] platform regulatory.0: firmware: direct-loading firmware regulatory.db 2023-11-08T17:14:12.700365+01:00 heisenberg kernel: [ 66.979956] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s 2023-11-08T17:14:12.700366+01:00 heisenberg kernel: [ 66.980714] videodev: Linux video capture interface: v2.00 2023-11-08T17:14:12.700366+01:00 heisenberg kernel: [ 66.982752] iTCO_vendor_support: vendor-support=0 2023-11-08T17:14:12.700367+01:00 heisenberg kernel: [ 66.983174] mmc0: SDHCI controller on PCI [0000:59:00.0] using ADMA 2023-11-08T17:14:12.700367+01:00 heisenberg kernel: [ 66.991079] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) 2023-11-08T17:14:12.700368+01:00 heisenberg kernel: [ 66.994613] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) 2023-11-08T17:14:12.700368+01:00 heisenberg kernel: [ 66.999542] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) 2023-11-08T17:14:12.700369+01:00 heisenberg kernel: [ 67.001175] intel_rapl_common: Found RAPL domain package 2023-11-08T17:14:12.700369+01:00 heisenberg kernel: [ 67.002149] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 2023-11-08T17:14:12.700370+01:00 heisenberg kernel: [ 67.003448] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer 2023-11-08T17:14:12.700370+01:00 heisenberg kernel: [ 67.004208] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules 2023-11-08T17:14:12.700371+01:00 heisenberg kernel: [ 67.004968] RAPL PMU: hw unit of domain package 2^-14 Joules 2023-11-08T17:14:12.700371+01:00 heisenberg kernel: [ 67.005967] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules 2023-11-08T17:14:12.700371+01:00 heisenberg kernel: [ 67.006703] RAPL PMU: hw unit of domain psys 2^-14 Joules 2023-11-08T17:14:12.700372+01:00 heisenberg kernel: [ 67.017414] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:12.700372+01:00 heisenberg kernel: [ 67.018736] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:12.700373+01:00 heisenberg kernel: [ 67.021389] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:12.700373+01:00 heisenberg kernel: [ 67.023130] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:12.700374+01:00 heisenberg kernel: [ 67.024035] thunderbolt 0-1: device disconnected 2023-11-08T17:14:12.700374+01:00 heisenberg kernel: [ 67.093110] Intel(R) Wireless WiFi driver for Linux 2023-11-08T17:14:12.700375+01:00 heisenberg kernel: [ 67.104285] iwlwifi 0000:00:14.3: Detected crf-id 0x400410, cnv-id 0x80400 wfpm id 0x80000020 2023-11-08T17:14:12.700375+01:00 heisenberg kernel: [ 67.105273] iwlwifi 0000:00:14.3: PCI dev 51f0/0090, rev=0x370, rfid=0x2010d000 2023-11-08T17:14:12.700376+01:00 heisenberg kernel: [ 67.108626] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-83.ucode (-2) 2023-11-08T17:14:12.700376+01:00 heisenberg kernel: [ 67.109572] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware 2023-11-08T17:14:12.700377+01:00 heisenberg kernel: [ 67.109585] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-83.ucode (-2) 2023-11-08T17:14:12.700377+01:00 heisenberg kernel: [ 67.111690] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-83.ucode failed with error -2 2023-11-08T17:14:12.700377+01:00 heisenberg kernel: [ 67.111705] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-82.ucode (-2) 2023-11-08T17:14:12.700378+01:00 heisenberg kernel: [ 67.113700] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-82.ucode (-2) 2023-11-08T17:14:12.700378+01:00 heisenberg kernel: [ 67.113701] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-82.ucode failed with error -2 2023-11-08T17:14:12.700379+01:00 heisenberg kernel: [ 67.113713] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-81.ucode (-2) 2023-11-08T17:14:12.700379+01:00 heisenberg kernel: [ 67.113721] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-81.ucode (-2) 2023-11-08T17:14:12.700380+01:00 heisenberg kernel: [ 67.113723] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-81.ucode failed with error -2 2023-11-08T17:14:12.700380+01:00 heisenberg kernel: [ 67.113732] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-80.ucode (-2) 2023-11-08T17:14:12.700380+01:00 heisenberg kernel: [ 67.119240] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-80.ucode (-2) 2023-11-08T17:14:12.700381+01:00 heisenberg kernel: [ 67.119242] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-80.ucode failed with error -2 2023-11-08T17:14:12.700381+01:00 heisenberg kernel: [ 67.119253] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-79.ucode (-2) 2023-11-08T17:14:12.700421+01:00 heisenberg kernel: [ 67.119260] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-79.ucode (-2) 2023-11-08T17:14:12.700422+01:00 heisenberg kernel: [ 67.119261] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-79.ucode failed with error -2 2023-11-08T17:14:12.700422+01:00 heisenberg kernel: [ 67.119270] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-78.ucode (-2) 2023-11-08T17:14:12.700422+01:00 heisenberg kernel: [ 67.119279] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-78.ucode (-2) 2023-11-08T17:14:12.700423+01:00 heisenberg kernel: [ 67.119280] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-78.ucode failed with error -2 2023-11-08T17:14:12.700423+01:00 heisenberg kernel: [ 67.119289] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-77.ucode (-2) 2023-11-08T17:14:12.700424+01:00 heisenberg kernel: [ 67.119297] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-77.ucode (-2) 2023-11-08T17:14:12.700424+01:00 heisenberg kernel: [ 67.119298] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-77.ucode failed with error -2 2023-11-08T17:14:12.700424+01:00 heisenberg kernel: [ 67.119307] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-76.ucode (-2) 2023-11-08T17:14:12.700425+01:00 heisenberg kernel: [ 67.119315] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-76.ucode (-2) 2023-11-08T17:14:12.700425+01:00 heisenberg kernel: [ 67.119316] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-76.ucode failed with error -2 2023-11-08T17:14:12.700426+01:00 heisenberg kernel: [ 67.119325] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-75.ucode (-2) 2023-11-08T17:14:12.700426+01:00 heisenberg kernel: [ 67.119333] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-75.ucode (-2) 2023-11-08T17:14:12.700426+01:00 heisenberg kernel: [ 67.119334] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-75.ucode failed with error -2 2023-11-08T17:14:12.700427+01:00 heisenberg kernel: [ 67.119343] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-74.ucode (-2) 2023-11-08T17:14:12.700427+01:00 heisenberg kernel: [ 67.119350] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-74.ucode (-2) 2023-11-08T17:14:12.700428+01:00 heisenberg kernel: [ 67.119351] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-74.ucode failed with error -2 2023-11-08T17:14:12.700428+01:00 heisenberg kernel: [ 67.119360] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-73.ucode (-2) 2023-11-08T17:14:12.700428+01:00 heisenberg kernel: [ 67.119367] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-so-a0-gf-a0-73.ucode (-2) 2023-11-08T17:14:12.700429+01:00 heisenberg kernel: [ 67.119368] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-73.ucode failed with error -2 2023-11-08T17:14:12.700429+01:00 heisenberg kernel: [ 67.127801] usb 1-6: Found UVC 1.50 device FJ Camera (04f2:b704) 2023-11-08T17:14:12.700431+01:00 heisenberg kernel: [ 67.137209] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-so-a0-gf-a0-72.ucode 2023-11-08T17:14:12.700431+01:00 heisenberg kernel: [ 67.142168] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0001/input/input8 2023-11-08T17:14:12.700432+01:00 heisenberg kernel: [ 67.151863] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0001/input/input10 2023-11-08T17:14:12.700432+01:00 heisenberg kernel: [ 67.152798] hid-generic 0018:04F3:31B0.0001: input,hidraw0: I2C HID v1.00 Mouse [0X45 0X4C 0X41 0X4E 04F3:31B0] on i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00 2023-11-08T17:14:12.700433+01:00 heisenberg kernel: [ 67.153351] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 2023-11-08T17:14:12.700433+01:00 heisenberg kernel: [ 67.153980] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver 2023-11-08T17:14:12.700434+01:00 heisenberg kernel: [ 67.155024] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver 2023-11-08T17:14:12.700434+01:00 heisenberg kernel: [ 67.155324] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36 2023-11-08T17:14:12.700435+01:00 heisenberg kernel: [ 67.157530] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2) 2023-11-08T17:14:12.700436+01:00 heisenberg kernel: [ 67.157539] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2) 2023-11-08T17:14:12.700436+01:00 heisenberg kernel: [ 67.157541] iwlwifi 0000:00:14.3: loaded firmware version 72.a764baac.0 so-a0-gf-a0-72.ucode op_mode iwlmvm 2023-11-08T17:14:12.700490+01:00 heisenberg kernel: [ 67.158488] usbcore: registered new interface driver uvcvideo 2023-11-08T17:14:12.700491+01:00 heisenberg kernel: [ 67.283513] Bluetooth: Core ver 2.22 2023-11-08T17:14:12.700492+01:00 heisenberg kernel: [ 67.284742] NET: Registered PF_BLUETOOTH protocol family 2023-11-08T17:14:12.700492+01:00 heisenberg kernel: [ 67.285882] Bluetooth: HCI device and connection manager initialized 2023-11-08T17:14:12.700493+01:00 heisenberg kernel: [ 67.287060] Bluetooth: HCI socket layer initialized 2023-11-08T17:14:12.700493+01:00 heisenberg kernel: [ 67.288273] Bluetooth: L2CAP socket layer initialized 2023-11-08T17:14:12.700494+01:00 heisenberg kernel: [ 67.289711] Bluetooth: SCO socket layer initialized 2023-11-08T17:14:12.700494+01:00 heisenberg kernel: [ 67.334627] usbcore: registered new interface driver btusb 2023-11-08T17:14:12.700494+01:00 heisenberg kernel: [ 67.340579] Bluetooth: hci0: Device revision is 0 2023-11-08T17:14:12.700495+01:00 heisenberg kernel: [ 67.341525] Bluetooth: hci0: Secure boot is enabled 2023-11-08T17:14:12.700495+01:00 heisenberg kernel: [ 67.342455] Bluetooth: hci0: OTP lock is enabled 2023-11-08T17:14:12.700495+01:00 heisenberg kernel: [ 67.343343] Bluetooth: hci0: API lock is enabled 2023-11-08T17:14:12.700496+01:00 heisenberg kernel: [ 67.344206] Bluetooth: hci0: Debug lock is disabled 2023-11-08T17:14:12.700496+01:00 heisenberg kernel: [ 67.345076] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 2023-11-08T17:14:12.700496+01:00 heisenberg kernel: [ 67.345940] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 2023-11-08T17:14:12.700497+01:00 heisenberg kernel: [ 67.348393] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0040-0041.sfi 2023-11-08T17:14:12.700497+01:00 heisenberg kernel: [ 67.354223] Bluetooth: hci0: Found device firmware: intel/ibt-0040-0041.sfi 2023-11-08T17:14:12.700498+01:00 heisenberg kernel: [ 67.354899] Bluetooth: hci0: Boot Address: 0x100800 2023-11-08T17:14:12.700498+01:00 heisenberg kernel: [ 67.355559] Bluetooth: hci0: Firmware Version: 98-13.23 2023-11-08T17:14:12.700499+01:00 heisenberg kernel: [ 67.361740] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 2023-11-08T17:14:12.700499+01:00 heisenberg kernel: [ 67.373435] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver 2023-11-08T17:14:12.700499+01:00 heisenberg kernel: [ 67.374699] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) 2023-11-08T17:14:12.700500+01:00 heisenberg kernel: [ 67.374889] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 2023-11-08T17:14:12.700500+01:00 heisenberg kernel: [ 67.375207] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x370 2023-11-08T17:14:12.700501+01:00 heisenberg kernel: [ 67.375279] thermal thermal_zone5: failed to read out thermal zone (-61) 2023-11-08T17:14:12.700501+01:00 heisenberg kernel: [ 67.384476] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) 2023-11-08T17:14:12.700502+01:00 heisenberg kernel: [ 67.391209] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode 2023-11-08T17:14:12.700502+01:00 heisenberg kernel: [ 67.425523] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 2023-11-08T17:14:12.700502+01:00 heisenberg kernel: [ 67.426659] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now 2023-11-08T17:14:12.700503+01:00 heisenberg kernel: [ 67.427794] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 2023-11-08T17:14:12.700503+01:00 heisenberg kernel: [ 67.430068] sof-audio-pci-intel-tgl 0000:00:1f.3: firmware: direct-loading firmware intel/sof/sof-adl.ri 2023-11-08T17:14:12.700504+01:00 heisenberg kernel: [ 67.430306] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0001/input/input11 2023-11-08T17:14:12.700504+01:00 heisenberg kernel: [ 67.432195] input: 0X45 0X4C 0X41 0X4E 04F3:31B0 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-17/i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00/0018:04F3:31B0.0001/input/input13 2023-11-08T17:14:12.700505+01:00 heisenberg kernel: [ 67.433339] hid-multitouch 0018:04F3:31B0.0001: input,hidraw0: I2C HID v1.00 Mouse [0X45 0X4C 0X41 0X4E 04F3:31B0] on i2c-0X45 0X4C 0X41 0X4E 0X30 0X44 0X30 0X38 0X00:00 2023-11-08T17:14:12.700505+01:00 heisenberg kernel: [ 67.434037] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 2023-11-08T17:14:12.700505+01:00 heisenberg kernel: [ 67.435564] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 2023-11-08T17:14:12.700506+01:00 heisenberg kernel: [ 67.436701] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 2023-11-08T17:14:12.700506+01:00 heisenberg kernel: [ 67.534986] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 2023-11-08T17:14:12.700507+01:00 heisenberg kernel: [ 67.536238] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 2023-11-08T17:14:12.700507+01:00 heisenberg kernel: [ 67.543465] sof-audio-pci-intel-tgl 0000:00:1f.3: firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg 2023-11-08T17:14:12.700507+01:00 heisenberg kernel: [ 67.544288] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 2023-11-08T17:14:12.700508+01:00 heisenberg kernel: [ 67.545166] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred 2023-11-08T17:14:12.700509+01:00 heisenberg kernel: [ 67.549677] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f 2023-11-08T17:14:12.700516+01:00 heisenberg kernel: [ 67.550747] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f 2023-11-08T17:14:12.700517+01:00 heisenberg kernel: [ 67.551757] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80 2023-11-08T17:14:12.700518+01:00 heisenberg kernel: [ 67.552822] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 2023-11-08T17:14:12.700518+01:00 heisenberg kernel: [ 67.554526] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-so-a0-gf-a0.pnvm 2023-11-08T17:14:12.700518+01:00 heisenberg kernel: [ 67.555609] iwlwifi 0000:00:14.3: loaded PNVM version e4a49534 2023-11-08T17:14:12.700519+01:00 heisenberg kernel: [ 67.568375] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker 2023-11-08T17:14:12.700523+01:00 heisenberg kernel: [ 67.569108] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 2023-11-08T17:14:12.700523+01:00 heisenberg kernel: [ 67.569812] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) 2023-11-08T17:14:12.700538+01:00 heisenberg kernel: [ 67.570462] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 2023-11-08T17:14:12.700538+01:00 heisenberg kernel: [ 67.571143] snd_hda_codec_realtek ehdaudio0D0: inputs: 2023-11-08T17:14:12.700538+01:00 heisenberg kernel: [ 67.571708] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000 2023-11-08T17:14:12.700539+01:00 heisenberg kernel: [ 67.571829] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 2023-11-08T17:14:12.700539+01:00 heisenberg kernel: [ 67.623352] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten 2023-11-08T17:14:12.700543+01:00 heisenberg kernel: [ 67.623998] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten 2023-11-08T17:14:12.700543+01:00 heisenberg kernel: [ 67.625163] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten 2023-11-08T17:14:12.700544+01:00 heisenberg kernel: [ 67.625835] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten 2023-11-08T17:14:12.700544+01:00 heisenberg kernel: [ 67.626494] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten 2023-11-08T17:14:12.700544+01:00 heisenberg kernel: [ 67.627147] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten 2023-11-08T17:14:12.700545+01:00 heisenberg kernel: [ 67.627814] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten 2023-11-08T17:14:12.700548+01:00 heisenberg kernel: [ 67.628500] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten 2023-11-08T17:14:12.700549+01:00 heisenberg kernel: [ 67.629168] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten 2023-11-08T17:14:12.700549+01:00 heisenberg kernel: [ 67.629725] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten 2023-11-08T17:14:12.700550+01:00 heisenberg kernel: [ 67.630259] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten 2023-11-08T17:14:12.700550+01:00 heisenberg kernel: [ 67.630786] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten 2023-11-08T17:14:12.700553+01:00 heisenberg kernel: [ 67.631337] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten 2023-11-08T17:14:12.700554+01:00 heisenberg kernel: [ 67.631877] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 2023-11-08T17:14:12.700554+01:00 heisenberg kernel: [ 67.638429] typec port0: bound usb4-port1 (ops connector_ops [usbcore]) 2023-11-08T17:14:12.700555+01:00 heisenberg kernel: [ 67.642275] iwlwifi 0000:00:14.3: base HW address: 7c:b5:66:f7:a8:a5 2023-11-08T17:14:12.700555+01:00 heisenberg kernel: [ 67.650720] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input14 2023-11-08T17:14:12.700555+01:00 heisenberg kernel: [ 67.651441] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input15 2023-11-08T17:14:12.700559+01:00 heisenberg kernel: [ 67.652145] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input16 2023-11-08T17:14:12.700559+01:00 heisenberg kernel: [ 67.653280] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input17 2023-11-08T17:14:12.700560+01:00 heisenberg kernel: [ 67.653878] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input18 2023-11-08T17:14:12.732458+01:00 heisenberg kernel: [ 67.855294] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:14:12.736539+01:00 heisenberg kernel: [ 67.857046] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:14:12.736544+01:00 heisenberg kernel: [ 67.857829] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:14:12.736546+01:00 heisenberg kernel: [ 67.858999] serial8250 serial8250: LSR safety check engaged! 2023-11-08T17:14:12.832490+01:00 heisenberg kernel: [ 67.954271] Bluetooth: hci0: Failed to send firmware data (-108) 2023-11-08T17:14:12.832496+01:00 heisenberg kernel: [ 67.955366] Bluetooth: hci0: Intel reset sent to retry FW download 2023-11-08T17:14:13.225051+01:00 heisenberg kernel: [ 68.347407] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f 2023-11-08T17:14:13.225079+01:00 heisenberg kernel: [ 68.348123] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f 2023-11-08T17:14:13.225080+01:00 heisenberg kernel: [ 68.348792] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80 2023-11-08T17:14:13.225081+01:00 heisenberg kernel: [ 68.349480] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 2023-11-08T17:14:13.320471+01:00 heisenberg kernel: [ 68.443759] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 1 2023-11-08T17:14:13.548630+01:00 heisenberg kernel: [ 68.669344] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f 2023-11-08T17:14:13.548641+01:00 heisenberg kernel: [ 68.669916] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f 2023-11-08T17:14:13.548642+01:00 heisenberg kernel: [ 68.670521] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80 2023-11-08T17:14:13.548643+01:00 heisenberg kernel: [ 68.671081] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 2023-11-08T17:14:13.920456+01:00 heisenberg kernel: [ 69.044283] qemu-system-x86[3814]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set 2023-11-08T17:14:15.024539+01:00 heisenberg kernel: [ 70.145138] Bluetooth: hci0: command 0xfca6 tx timeout 2023-11-08T17:14:15.388462+01:00 heisenberg kernel: [ 70.509015] usb 1-1: new high-speed USB device number 46 using xhci_hcd 2023-11-08T17:14:15.488550+01:00 heisenberg kernel: [ 70.611162] typec port1: bound usb4-port2 (ops connector_ops [usbcore]) 2023-11-08T17:14:15.604465+01:00 heisenberg kernel: [ 70.725427] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:15.604475+01:00 heisenberg kernel: [ 70.725439] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:15.604476+01:00 heisenberg kernel: [ 70.725444] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:15.604485+01:00 heisenberg kernel: [ 70.725447] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:15.604486+01:00 heisenberg kernel: [ 70.726198] usb 1-1: Device is not authorized for usage 2023-11-08T17:14:15.948510+01:00 heisenberg kernel: [ 71.069874] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:16.012458+01:00 heisenberg kernel: [ 71.134531] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:16.012466+01:00 heisenberg kernel: [ 71.134539] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:16.368593+01:00 heisenberg kernel: [ 71.490861] wlan0: authenticate with 50:e6:36:3c:99:36 2023-11-08T17:14:16.372595+01:00 heisenberg kernel: [ 71.496749] wlan0: send auth to 50:e6:36:3c:99:36 (try 1/3) 2023-11-08T17:14:16.924564+01:00 heisenberg kernel: [ 72.045587] usb 1-1: USB disconnect, device number 46 2023-11-08T17:14:16.988622+01:00 heisenberg kernel: [ 72.109681] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:16.988650+01:00 heisenberg kernel: [ 72.109938] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:16.992507+01:00 heisenberg kernel: [ 72.113858] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:16.992536+01:00 heisenberg kernel: [ 72.116295] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:16.992539+01:00 heisenberg kernel: [ 72.116819] thunderbolt 0-1: device disconnected 2023-11-08T17:14:17.028637+01:00 heisenberg kernel: [ 72.150618] wlan0: authenticate with 50:e6:36:3c:99:36 2023-11-08T17:14:17.028668+01:00 heisenberg kernel: [ 72.152184] wlan0: send auth to 50:e6:36:3c:99:36 (try 1/3) 2023-11-08T17:14:17.116701+01:00 heisenberg kernel: [ 72.237717] wlan0: authenticated 2023-11-08T17:14:17.116725+01:00 heisenberg kernel: [ 72.241276] wlan0: associate with 50:e6:36:3c:99:36 (try 1/3) 2023-11-08T17:14:17.120613+01:00 heisenberg kernel: [ 72.244652] wlan0: RX AssocResp from 50:e6:36:3c:99:36 (capab=0x1511 status=0 aid=1) 2023-11-08T17:14:17.128531+01:00 heisenberg kernel: [ 72.251618] wlan0: associated 2023-11-08T17:14:17.128543+01:00 heisenberg kernel: [ 72.251657] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 50:e6:36:3c:99:36 2023-11-08T17:14:17.156495+01:00 heisenberg kernel: [ 72.278051] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156514+01:00 heisenberg kernel: [ 72.278518] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156516+01:00 heisenberg kernel: [ 72.278944] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156517+01:00 heisenberg kernel: [ 72.279207] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156518+01:00 heisenberg kernel: [ 72.279598] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156519+01:00 heisenberg kernel: [ 72.279982] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156519+01:00 heisenberg kernel: [ 72.280413] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.156520+01:00 heisenberg kernel: [ 72.280811] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 2023-11-08T17:14:17.720701+01:00 heisenberg kernel: [ 72.844357] usb 1-10: USB disconnect, device number 6 2023-11-08T17:14:21.032529+01:00 heisenberg kernel: [ 76.156842] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:21.100585+01:00 heisenberg kernel: [ 76.221493] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:21.100596+01:00 heisenberg kernel: [ 76.221497] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:22.080653+01:00 heisenberg kernel: [ 77.201781] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:22.080681+01:00 heisenberg kernel: [ 77.202885] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:22.080682+01:00 heisenberg kernel: [ 77.204496] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:22.084524+01:00 heisenberg kernel: [ 77.205698] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:22.084544+01:00 heisenberg kernel: [ 77.206191] thunderbolt 0-1: device disconnected 2023-11-08T17:14:23.028535+01:00 heisenberg kernel: [ 78.145249] Bluetooth: hci0: Reading supported features failed (-110) 2023-11-08T17:14:23.028555+01:00 heisenberg kernel: [ 78.145272] Bluetooth: hci0: Error reading debug features 2023-11-08T17:14:23.312853+01:00 heisenberg kernel: [ 78.433347] usb 1-10: new full-speed USB device number 47 using xhci_hcd 2023-11-08T17:14:23.460678+01:00 heisenberg kernel: [ 78.583875] usb 1-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00 2023-11-08T17:14:23.460727+01:00 heisenberg kernel: [ 78.583905] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2023-11-08T17:14:23.464501+01:00 heisenberg kernel: [ 78.585404] usb 1-10: Device is not authorized for usage 2023-11-08T17:14:25.576574+01:00 heisenberg kernel: [ 80.697172] usb 1-1: new high-speed USB device number 48 using xhci_hcd 2023-11-08T17:14:25.792579+01:00 heisenberg kernel: [ 80.913809] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:25.792599+01:00 heisenberg kernel: [ 80.913823] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:25.792601+01:00 heisenberg kernel: [ 80.913829] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:25.792603+01:00 heisenberg kernel: [ 80.913833] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:25.792604+01:00 heisenberg kernel: [ 80.914894] usb 1-1: Device is not authorized for usage 2023-11-08T17:14:26.156540+01:00 heisenberg kernel: [ 81.279928] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:26.220540+01:00 heisenberg kernel: [ 81.344644] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:26.220566+01:00 heisenberg kernel: [ 81.344654] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:27.124590+01:00 heisenberg kernel: [ 82.246188] usb 1-1: USB disconnect, device number 48 2023-11-08T17:14:27.200648+01:00 heisenberg kernel: [ 82.321839] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:27.200677+01:00 heisenberg kernel: [ 82.323179] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:27.204526+01:00 heisenberg kernel: [ 82.325482] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:27.204548+01:00 heisenberg kernel: [ 82.326838] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:27.204550+01:00 heisenberg kernel: [ 82.327298] thunderbolt 0-1: device disconnected 2023-11-08T17:14:30.684537+01:00 heisenberg kernel: [ 85.805213] usb 1-1: new high-speed USB device number 49 using xhci_hcd 2023-11-08T17:14:30.900510+01:00 heisenberg kernel: [ 86.021876] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:30.900529+01:00 heisenberg kernel: [ 86.021892] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:30.900532+01:00 heisenberg kernel: [ 86.021897] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:30.900535+01:00 heisenberg kernel: [ 86.021902] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:30.900537+01:00 heisenberg kernel: [ 86.022935] usb 1-1: Device is not authorized for usage 2023-11-08T17:14:31.260586+01:00 heisenberg kernel: [ 86.384241] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:14:31.324575+01:00 heisenberg kernel: [ 86.448966] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:14:31.324604+01:00 heisenberg kernel: [ 86.448978] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:14:32.224728+01:00 heisenberg kernel: [ 87.346353] usb 1-1: USB disconnect, device number 49 2023-11-08T17:14:32.304683+01:00 heisenberg kernel: [ 87.425945] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:14:32.304744+01:00 heisenberg kernel: [ 87.427038] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:14:32.304748+01:00 heisenberg kernel: [ 87.428610] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:14:32.308492+01:00 heisenberg kernel: [ 87.429825] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:14:32.308503+01:00 heisenberg kernel: [ 87.430529] thunderbolt 0-1: device disconnected 2023-11-08T17:14:35.784633+01:00 heisenberg kernel: [ 90.905267] usb 1-1: new high-speed USB device number 50 using xhci_hcd 2023-11-08T17:14:36.003143+01:00 heisenberg kernel: [ 91.121920] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:14:36.003172+01:00 heisenberg kernel: [ 91.121936] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:14:36.003173+01:00 heisenberg kernel: [ 91.121942] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:14:36.003175+01:00 heisenberg kernel: [ 91.121946] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:14:36.003176+01:00 heisenberg kernel: [ 91.122966] usb 1-1: Device is not authorized for usage 2023-11-08T17:14:36.280546+01:00 heisenberg kernel: [ 91.402449] usb 1-1: USB disconnect, device number 50 2023-11-08T17:15:56.916580+01:00 heisenberg kernel: [ 172.038974] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:15:56.980514+01:00 heisenberg kernel: [ 172.105165] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:15:56.980545+01:00 heisenberg kernel: [ 172.105175] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:15:57.204601+01:00 heisenberg kernel: [ 172.326891] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:15:57.204631+01:00 heisenberg kernel: [ 172.327884] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:15:57.208486+01:00 heisenberg kernel: [ 172.330294] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:15:57.208501+01:00 heisenberg kernel: [ 172.331691] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:15:57.208503+01:00 heisenberg kernel: [ 172.332057] thunderbolt 0-1: device disconnected 2023-11-08T17:16:01.328484+01:00 heisenberg kernel: [ 176.453532] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:16:01.396612+01:00 heisenberg kernel: [ 176.518111] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:16:01.396641+01:00 heisenberg kernel: [ 176.518122] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:16:02.372658+01:00 heisenberg kernel: [ 177.496219] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:16:02.372702+01:00 heisenberg kernel: [ 177.497295] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:16:02.376608+01:00 heisenberg kernel: [ 177.500914] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:16:02.380538+01:00 heisenberg kernel: [ 177.502345] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:16:02.380552+01:00 heisenberg kernel: [ 177.502971] thunderbolt 0-1: device disconnected 2023-11-08T17:16:03.812801+01:00 heisenberg kernel: [ 178.934409] usb usb1-port1: attempt power cycle 2023-11-08T17:16:06.428533+01:00 heisenberg kernel: [ 181.550518] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:16:06.496570+01:00 heisenberg kernel: [ 181.618035] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:16:06.496590+01:00 heisenberg kernel: [ 181.618049] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:16:07.472595+01:00 heisenberg kernel: [ 182.596245] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:16:07.476541+01:00 heisenberg kernel: [ 182.598513] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:16:07.476653+01:00 heisenberg kernel: [ 182.601266] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:16:07.480487+01:00 heisenberg kernel: [ 182.602864] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:16:07.480504+01:00 heisenberg kernel: [ 182.603607] thunderbolt 0-1: device disconnected 2023-11-08T17:16:11.544474+01:00 heisenberg kernel: [ 186.668685] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:16:11.612542+01:00 heisenberg kernel: [ 186.734540] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:16:11.612561+01:00 heisenberg kernel: [ 186.734554] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:16:12.480657+01:00 heisenberg kernel: [ 187.603139] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:16:12.480710+01:00 heisenberg kernel: [ 187.604435] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:16:12.484625+01:00 heisenberg kernel: [ 187.607873] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:16:12.484661+01:00 heisenberg kernel: [ 187.609381] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:16:12.484679+01:00 heisenberg kernel: [ 187.610185] thunderbolt 0-1: device disconnected 2023-11-08T17:16:13.824803+01:00 heisenberg kernel: [ 188.946717] usb usb1-port1: attempt power cycle 2023-11-08T17:16:14.660613+01:00 heisenberg kernel: [ 189.782849] usb 1-7: USB disconnect, device number 5 2023-11-08T17:16:16.640603+01:00 heisenberg kernel: [ 191.762080] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:16:16.708599+01:00 heisenberg kernel: [ 191.830982] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:16:16.708617+01:00 heisenberg kernel: [ 191.830995] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:16:17.684625+01:00 heisenberg kernel: [ 192.808165] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:16:17.688621+01:00 heisenberg kernel: [ 192.810422] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:16:17.688651+01:00 heisenberg kernel: [ 192.813366] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:16:17.692662+01:00 heisenberg kernel: [ 192.814753] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:16:17.692680+01:00 heisenberg kernel: [ 192.815365] thunderbolt 0-1: device disconnected 2023-11-08T17:16:21.728585+01:00 heisenberg kernel: [ 196.853625] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:16:21.796599+01:00 heisenberg kernel: [ 196.918482] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:16:21.796623+01:00 heisenberg kernel: [ 196.918490] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:16:22.776681+01:00 heisenberg kernel: [ 197.900133] thunderbolt 0000:00:0d.2: 1: failed to enable CL states 2023-11-08T17:16:22.776733+01:00 heisenberg kernel: [ 197.901520] thunderbolt 0000:00:0d.2: 1: failed to enable TMU 2023-11-08T17:16:22.780657+01:00 heisenberg kernel: [ 197.905458] thunderbolt 0000:00:0d.2: 1: USB3 tunnel creation failed 2023-11-08T17:16:22.784517+01:00 heisenberg kernel: [ 197.906999] thunderbolt 0-0:1.1: retimer disconnected 2023-11-08T17:16:22.784544+01:00 heisenberg kernel: [ 197.907647] thunderbolt 0-1: device disconnected 2023-11-08T17:16:24.020794+01:00 heisenberg kernel: [ 199.142426] usb usb1-port1: attempt power cycle 2023-11-08T17:16:34.220806+01:00 heisenberg kernel: [ 209.342852] usb usb1-port1: attempt power cycle 2023-11-08T17:17:13.260470+01:00 heisenberg kernel: [ 248.382720] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee 2023-11-08T17:17:13.324466+01:00 heisenberg kernel: [ 248.448824] thunderbolt 0-1: new device found, vendor=0x23f device=0x19 2023-11-08T17:17:13.324485+01:00 heisenberg kernel: [ 248.448832] thunderbolt 0-1: Fujitsu Client Computing Limited Thunderbolt4 Port Replicator 2023-11-08T17:17:14.796707+01:00 heisenberg kernel: [ 249.918791] usb 1-1: new high-speed USB device number 63 using xhci_hcd 2023-11-08T17:17:14.944651+01:00 heisenberg kernel: [ 250.067515] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01 2023-11-08T17:17:14.944692+01:00 heisenberg kernel: [ 250.067542] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:17:14.944694+01:00 heisenberg kernel: [ 250.067549] usb 1-1: Product: USB2.0 Hub 2023-11-08T17:17:14.944696+01:00 heisenberg kernel: [ 250.067554] usb 1-1: Manufacturer: Fresco Logic, Inc. 2023-11-08T17:17:14.944698+01:00 heisenberg kernel: [ 250.069139] usb 1-1: Device is not authorized for usage 2023-11-08T17:17:14.968656+01:00 heisenberg kernel: [ 250.090613] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd 2023-11-08T17:17:14.992671+01:00 heisenberg kernel: [ 250.115138] usb 4-1: New USB device found, idVendor=8087, idProduct=0b40, bcdDevice=12.34 2023-11-08T17:17:14.992689+01:00 heisenberg kernel: [ 250.115145] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:17:14.992690+01:00 heisenberg kernel: [ 250.115146] usb 4-1: Product: USB3.0 Hub 2023-11-08T17:17:14.992691+01:00 heisenberg kernel: [ 250.115147] usb 4-1: Manufacturer: Intel Corporation. 2023-11-08T17:17:14.992691+01:00 heisenberg kernel: [ 250.115591] usb 4-1: Device is not authorized for usage 2023-11-08T17:17:18.892475+01:00 heisenberg kernel: [ 254.015259] hub 4-1:1.0: USB hub found 2023-11-08T17:17:18.892492+01:00 heisenberg kernel: [ 254.015345] hub 4-1:1.0: 4 ports detected 2023-11-08T17:17:18.892493+01:00 heisenberg kernel: [ 254.016081] usb 4-1: authorized to connect 2023-11-08T17:17:19.432774+01:00 heisenberg kernel: [ 254.555011] usb 4-1.4: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd 2023-11-08T17:17:19.452486+01:00 heisenberg kernel: [ 254.575438] usb 4-1.4: New USB device found, idVendor=0424, idProduct=7252, bcdDevice= 6.30 2023-11-08T17:17:19.452510+01:00 heisenberg kernel: [ 254.575453] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:17:19.452512+01:00 heisenberg kernel: [ 254.575458] usb 4-1.4: Product: USB7252 Smart Hub 2023-11-08T17:17:19.452514+01:00 heisenberg kernel: [ 254.575461] usb 4-1.4: Manufacturer: Microchip 2023-11-08T17:17:19.452514+01:00 heisenberg kernel: [ 254.575751] usb 4-1.4: Device is not authorized for usage 2023-11-08T17:17:19.812580+01:00 heisenberg kernel: [ 254.937407] hub 4-1.4:1.0: USB hub found 2023-11-08T17:17:19.812586+01:00 heisenberg kernel: [ 254.937465] hub 4-1.4:1.0: 3 ports detected 2023-11-08T17:17:19.812587+01:00 heisenberg kernel: [ 254.937971] usb 4-1.4: authorized to connect 2023-11-08T17:17:20.104774+01:00 heisenberg kernel: [ 255.227921] usb 4-1.4.3: new SuperSpeed USB device number 4 using xhci_hcd 2023-11-08T17:17:20.144523+01:00 heisenberg kernel: [ 255.269669] usb 4-1.4.3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.26 2023-11-08T17:17:20.144549+01:00 heisenberg kernel: [ 255.269684] usb 4-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2023-11-08T17:17:20.144552+01:00 heisenberg kernel: [ 255.269688] usb 4-1.4.3: Product: 4-Port USB 3.1 Hub 2023-11-08T17:17:20.144553+01:00 heisenberg kernel: [ 255.269691] usb 4-1.4.3: Manufacturer: Generic 2023-11-08T17:17:20.144554+01:00 heisenberg kernel: [ 255.270049] usb 4-1.4.3: Device is not authorized for usage 2023-11-08T17:17:25.872610+01:00 heisenberg kernel: [ 260.997580] hub 4-1.4.3:1.0: USB hub found 2023-11-08T17:17:25.876625+01:00 heisenberg kernel: [ 260.998986] hub 4-1.4.3:1.0: 4 ports detected 2023-11-08T17:17:25.880530+01:00 heisenberg kernel: [ 261.006009] usb 4-1.4.3: authorized to connect