Make the USB Test & Measurement driver use usb_clear_halt() instead of usb_control_msg() to clear a stalled endpoint. This will allow devices to be tested under an xHCI host controller. The endpoint stall will not be cleared in the internal xHCI hardware state unless usb_clear_halt() is used. Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> Cc: Steve Holland <sdh4@xxxxxxxxxxx> Cc: Oliver Neukum <oliver@xxxxxxxxxx> Cc: Jouni Ryno <Jouni.Ryno@xxxxxx> Cc: Gergely Imreh <imrehg@xxxxxxxxx> --- drivers/usb/class/usbtmc.c | 36 ++++++++---------------------------- 1 files changed, 8 insertions(+), 28 deletions(-) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 2473cf0..51d5107 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -347,13 +347,8 @@ usbtmc_abort_bulk_out_check_status: goto exit; usbtmc_abort_bulk_out_clear_halt: - rv = usb_control_msg(data->usb_dev, - usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, data->bulk_out, buffer, - 0, USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(dev, "usb_control_msg returned %d\n", rv); @@ -702,14 +697,8 @@ usbtmc_clear_check_status: usbtmc_clear_bulk_out_halt: - rv = usb_control_msg(data->usb_dev, - usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, - data->bulk_out, buffer, 0, - USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(dev, "usb_control_msg returned %d\n", rv); goto exit; @@ -730,13 +719,8 @@ static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data) if (!buffer) return -ENOMEM; - rv = usb_control_msg(data->usb_dev, - usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, data->bulk_out, - buffer, 0, USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", @@ -759,12 +743,8 @@ static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data) if (!buffer) return -ENOMEM; - rv = usb_control_msg(data->usb_dev, usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, data->bulk_in, buffer, 0, - USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, data->bulk_in)); if (rv < 0) { dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html