Re: [PATCH v3] usb: typec: tcpm: Fix sink caps op current check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 01, 2023 at 01:28:45AM +0000, Badhri Jagan Sridharan wrote:
> TCPM checks for sink caps operational current even when PD is disabled.
> This incorrectly sets tcpm_set_charge() when PD is disabled.
> Check for sink caps only when PD is enabled.
> 
> [   97.572342] Start toggling
> [   97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
> [   99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected]
> [   99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
> [   99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
> [   99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
> [   99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected]
> [   99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
> [   99.903584] VBUS on
> [   99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
> [   99.903600] polarity 1
> [   99.910155] enable vbus discharge ret:0
> [   99.910160] Requesting mux state 1, usb-role 2, orientation 2
> [   99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
> [   99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
> [   99.946800] Setting voltage/current limit 5000 mV 500 mA
> [   99.946803] vbus=0 charge:=1
> [  100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS]
> [  100.027145] Setting voltage/current limit 5000 mV 3000 mA
> [  100.466830] VBUS on
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA")
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>

Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
> Changes since v2:
> * Fix the "Fixes" tag
> * Refactor code based on Guenter Roeck's suggestion.
> 
> Changes since v1:
> * Fix commit title and description to address comments from Guenter Roeck
> ---
>  drivers/usb/typec/tcpm/tcpm.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 058d5b853b57..afc791ab6d4f 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port)
>  				current_lim = PD_P_SNK_STDBY_MW / 5;
>  			tcpm_set_current_limit(port, current_lim, 5000);
>  			/* Not sink vbus if operational current is 0mA */
> -			tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
> +			tcpm_set_charge(port, !port->pd_supported ||
> +					pdo_max_current(port->snk_pdo[0]));
>  
>  			if (!port->pd_supported)
>  				tcpm_set_state(port, SNK_READY, 0);
> 
> base-commit: c70793fb7632a153862ee9060e6d48131469a29c
> -- 
> 2.42.0.820.g83a721a137-goog

-- 
heikki




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux