From: Neil Armstrong <neil.armstrong@xxxxxxxxxx> [ Upstream commit c6165ed2f425c273244191930a47c8be23bc51bd ] On SM8550, the non-altmode orientation is not given anymore within altmode events, even with USB SVIDs events. On the other side, the Type-C connector orientation is correctly reported by a signal from the PMIC. Take this gpio signal when we detect some Type-C port activity to notify any Type-C switches tied to the Type-C port connectors. Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Link: https://lore.kernel.org/r/20231002-topic-sm8550-upstream-type-c-orientation-v2-2-125410d3ff95@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/usb/typec/ucsi/ucsi_glink.c | 54 ++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index bb1854b3311dc..db6e248f82083 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -8,9 +8,13 @@ #include <linux/mutex.h> #include <linux/property.h> #include <linux/soc/qcom/pdr.h> +#include <linux/usb/typec_mux.h> +#include <linux/gpio/consumer.h> #include <linux/soc/qcom/pmic_glink.h> #include "ucsi.h" +#define PMIC_GLINK_MAX_PORTS 2 + #define UCSI_BUF_SIZE 48 #define MSG_TYPE_REQ_RESP 1 @@ -52,6 +56,9 @@ struct ucsi_notify_ind_msg { struct pmic_glink_ucsi { struct device *dev; + struct gpio_desc *port_orientation[PMIC_GLINK_MAX_PORTS]; + struct typec_switch *port_switch[PMIC_GLINK_MAX_PORTS]; + struct pmic_glink_client *client; struct ucsi *ucsi; @@ -220,8 +227,20 @@ static void pmic_glink_ucsi_notify(struct work_struct *work) } con_num = UCSI_CCI_CONNECTOR(cci); - if (con_num) + if (con_num) { + if (con_num < PMIC_GLINK_MAX_PORTS && + ucsi->port_orientation[con_num - 1]) { + int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]); + + if (orientation >= 0) { + typec_switch_set(ucsi->port_switch[con_num - 1], + orientation ? TYPEC_ORIENTATION_REVERSE + : TYPEC_ORIENTATION_NORMAL); + } + } + ucsi_connector_change(ucsi->ucsi, con_num); + } if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) { ucsi->sync_val = -EBUSY; @@ -282,6 +301,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, { struct pmic_glink_ucsi *ucsi; struct device *dev = &adev->dev; + struct fwnode_handle *fwnode; int ret; ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL); @@ -309,6 +329,38 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, ucsi_set_drvdata(ucsi->ucsi, ucsi); + device_for_each_child_node(dev, fwnode) { + struct gpio_desc *desc; + u32 port; + + ret = fwnode_property_read_u32(fwnode, "reg", &port); + if (ret < 0) { + dev_err(dev, "missing reg property of %pOFn\n", fwnode); + return ret; + } + + if (port >= PMIC_GLINK_MAX_PORTS) { + dev_warn(dev, "invalid connector number, ignoring\n"); + continue; + } + + desc = devm_gpiod_get_index_optional(&adev->dev, "orientation", port, GPIOD_IN); + + /* If GPIO isn't found, continue */ + if (!desc) + continue; + + if (IS_ERR(desc)) + return dev_err_probe(dev, PTR_ERR(desc), + "unable to acquire orientation gpio\n"); + ucsi->port_orientation[port] = desc; + + ucsi->port_switch[port] = fwnode_typec_switch_get(fwnode); + if (IS_ERR(ucsi->port_switch[port])) + return dev_err_probe(dev, PTR_ERR(ucsi->port_switch[port]), + "failed to acquire orientation-switch\n"); + } + ucsi->client = devm_pmic_glink_register_client(dev, PMIC_GLINK_OWNER_USBC, pmic_glink_ucsi_callback, -- 2.42.0
