Re: [PATCH v9 4/4] usb: gadget: uvc: Fix use-after-free for inflight usb_requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for taking a look Dan!

On 10/28/23 13:56, Dan Scally wrote:
> Hi Avichal
> 
> On 27/10/2023 21:19, Avichal Rakesh wrote:
>> Currently, the uvc gadget driver allocates all uvc_requests as one array
>> and deallocates them all when the video stream stops. This includes
>> de-allocating all the usb_requests associated with those uvc_requests.
>> This can lead to use-after-free issues if any of those de-allocated
>> usb_requests were still owned by the usb controller.
>>
>> This is patch 2 of 2 in fixing the use-after-free issue. It adds a new
>> flag to uvc_video to track when frames and requests should be flowing.
>> When disabling the video stream, the flag is tripped and, instead
>> of de-allocating all uvc_requests and usb_requests, the gadget
>> driver only de-allocates those usb_requests that are currently
>> owned by it (as present in req_free). Other usb_requests are left
>> untouched until their completion handler is called which takes care
>> of freeing the usb_request and its corresponding uvc_request.
>>
>> Now that uvc_video does not depends on uvc->state, this patch removes
>> unnecessary upates to uvc->state that were made to accommodate uvc_video
>> logic. This should ensure that uvc gadget driver never accidentally
>> de-allocates a usb_request that it doesn't own.
>>
>> Link: https://lore.kernel.org/7cd81649-2795-45b6-8c10-b7df1055020d@xxxxxxxxxx
>> Suggested-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
>> Reviewed-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
>> Tested-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
>> Signed-off-by: Avichal Rakesh <arakesh@xxxxxxxxxx>
>> ---
>> v1 -> v2: Rebased to ToT, and fixed deadlock reported in
>>            https://lore.kernel.org/all/ZRv2UnKztgyqk2pt@xxxxxxxxxxxxxx/
>> v2 -> v3: Fix email threading goof-up
>> v3 -> v4: re-rebase to ToT & moved to a uvc_video level lock
>>            as discussed in
>>            https://lore.kernel.org/b14b296f-2e08-4edf-aeea-1c5b621e2d0c@xxxxxxxxxx/
>> v4 -> v5: Address review comments. Add Reviewed-by & Tested-by.
>> v5 -> v6: Added another patch before this one to make uvcg_video_disable
>>            easier to review.
>> v6 -> v7: Fix warning reported in
>>            https://lore.kernel.org/202310200457.GwPPFuHX-lkp@xxxxxxxxx/
>> v7 -> v8: No change. Getting back in review queue
>> v8 -> v9: No change.
>>
>>   drivers/usb/gadget/function/uvc.h       |   1 +
>>   drivers/usb/gadget/function/uvc_v4l2.c  |  12 +--
>>   drivers/usb/gadget/function/uvc_video.c | 128 ++++++++++++++++++++----
>>   3 files changed, 111 insertions(+), 30 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
>> index 993694da0bbc..be0d012aa244 100644
>> --- a/drivers/usb/gadget/function/uvc.h
>> +++ b/drivers/usb/gadget/function/uvc.h
>> @@ -102,6 +102,7 @@ struct uvc_video {
>>       unsigned int uvc_num_requests;
>>
>>       /* Requests */
>> +    bool is_enabled; /* tracks whether video stream is enabled */
>>       unsigned int req_size;
>>       struct list_head ureqs; /* all uvc_requests allocated by uvc_video */
>>       struct list_head req_free;
>> diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
>> index 904dd283cbf7..2f8634e05612 100644
>> --- a/drivers/usb/gadget/function/uvc_v4l2.c
>> +++ b/drivers/usb/gadget/function/uvc_v4l2.c
>> @@ -451,8 +451,8 @@ uvc_v4l2_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
>>        * Complete the alternate setting selection setup phase now that
>>        * userspace is ready to provide video frames.
>>        */
>> -    uvc_function_setup_continue(uvc, 0);
>>       uvc->state = UVC_STATE_STREAMING;
>> +    uvc_function_setup_continue(uvc, 0);
>>
>>       return 0;
>>   }
>> @@ -468,11 +468,11 @@ uvc_v4l2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
>>       if (type != video->queue.queue.type)
>>           return -EINVAL;
>>
>> -    uvc->state = UVC_STATE_CONNECTED;
>>       ret = uvcg_video_disable(video);
>>       if (ret < 0)
>>           return ret;
>>
>> +    uvc->state = UVC_STATE_CONNECTED;
>>       uvc_function_setup_continue(uvc, 1);
>>       return 0;
>>   }
> 
> 
> I'm not sure I understand what these re-orderings are for...can you explain please?

This specific one was a leftover from testing, removed this hunk.
But the ones below are undoing the change in patch 1, which is
flawed in its use of uvc->state without any memory guarantees.

So from patch 1 to patch 4, we shuffle the code around a bit,
but this makes patch 1 somewhat complete and functional even if 
patch 4 were to be reverted.

> 
>> @@ -507,14 +507,6 @@ uvc_v4l2_subscribe_event(struct v4l2_fh *fh,
>>   static void uvc_v4l2_disable(struct uvc_device *uvc)
>>   {
>>       uvc_function_disconnect(uvc);
>> -    /*
>> -     * Drop uvc->state to CONNECTED if it was streaming before.
>> -     * This ensures that the usb_requests are no longer queued
>> -     * to the controller.
>> -     */
>> -    if (uvc->state == UVC_STATE_STREAMING)
>> -        uvc->state = UVC_STATE_CONNECTED;
>> -
>>       uvcg_video_disable(&uvc->video);
>>       uvcg_free_buffers(&uvc->video.queue);
>>       uvc->func_connected = false;
>> diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
>> index 1081dd790fd6..8f330ce696ec 100644
>> --- a/drivers/usb/gadget/function/uvc_video.c
>> +++ b/drivers/usb/gadget/function/uvc_video.c
>> @@ -227,6 +227,9 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
>>    * Request handling
>>    */
>>
>> +/*
>> + * Must be called with req_lock held as it modifies the list ureq is held in
>> + */
> 
> 
> 
> This comment probably belongs in patch #2. And in that case, shouldn't uvc_video_free_requests() hold the lock in that patch?

Patch 2 doesn't change any existing locking semantics. The current
code does not enforce any locking on freeing the requests, and neither
does patch 2. 

Patch 4 introduces another call site for uvc_video_free_request, so
some synchronization guarantees are needed (and hence the addition
of this comment).

As for uvc_video_free_requests not holding the lock, it is safe because
uvc_video_free_requests is only called if request initialization fails.
So uvc_video_free_requests should be the thread safe, as no other thread
is processing requests when it is called.

I did add a comment in uvcg_video_enable mentioning why it is safe to
not hold req_free even though it accesses request related fields.

Happy to add another comment to uvc_video_free_requests if that makes it 
clearer!

> 
>>   static void
>>   uvc_video_free_request(struct uvc_request *ureq, struct usb_ep *ep)
>>   {
>> @@ -271,9 +274,25 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
>>       struct uvc_request *ureq = req->context;
>>       struct uvc_video *video = ureq->video;
>>       struct uvc_video_queue *queue = &video->queue;
>> -    struct uvc_device *uvc = video->uvc;
>> +    struct uvc_buffer *last_buf = NULL;
>>       unsigned long flags;
>>
>> +    spin_lock_irqsave(&video->req_lock, flags);
>> +    if (!video->is_enabled) {
>> +        /*
>> +         * When is_enabled is false, uvc_video_disable ensures that
> s/uvc_video_disable/uvc_video_disable()

Done!

>> +         * in-flight uvc_buffers are returned, so we can safely
>> +         * call free_request without worrying about last_buf.
>> +         */
>> +        uvc_video_free_request(ureq, ep);
> Now I understand the conditional in this function in patch 2 :)
>> +        spin_unlock_irqrestore(&video->req_lock, flags);
>> +        return;
>> +    }
>> +
>> +    last_buf = ureq->last_buf;
>> +    ureq->last_buf = NULL;
>> +    spin_unlock_irqrestore(&video->req_lock, flags);
> 
> 
> I'm not a huge fan of this locking, unlocking and relocking the same spinlock within the same function. Can we just hold the lock for the duration? if not, can there be an explanatory comment as to why?

I agree that this is a little unfortunate, and it'd be nice if we
only had a single driver level lock. However, as it stands, if 
we hold req_lock for the entirety of completion handler, we risk
two things:

1. Adding dependencies between queue->irqlock and video->reqlock
2. Starving the video_pump thread. 

As of this patch, uvc_video_complete follows the same pattern as
video_pump function:
1. Acquire req_lock
2. Fetch/Query usb_request
3. Drop req_lock

4. Acquire queue->irqlock
5. Buffer ops (encode/free/stop)
6. Drop queue->irqlock

7. Acquire req_lock
8. usb_request cleanup/handling
9. Drop req_lock

(7), (8), and (9) are optional for video_pump, while
(4), (5), and (6) are optional for uvc_video_complete.

We can short-circuit uvc_video_complete with only one lock
on the happy path, but this would have to be the flow for
non-happy paths unless we want to hold the two locks at 
the same time (which isn't the worst idea, but comes with 
its own set of concerns).


>> +
>>       switch (req->status) {
>>       case 0:
>>           break;
>> @@ -295,17 +314,26 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
>>           uvcg_queue_cancel(queue, 0);
>>       }
>>
>> -    if (ureq->last_buf) {
>> -        uvcg_complete_buffer(&video->queue, ureq->last_buf);
>> -        ureq->last_buf = NULL;
>> +    if (last_buf) {
>> +        spin_lock_irqsave(&queue->irqlock, flags);
>> +        uvcg_complete_buffer(&video->queue, last_buf);
>> +        spin_unlock_irqrestore(&queue->irqlock, flags);
> 
> 
> 
> I think it's right to take the irqlock here but it probably should have always been held, so this probably ought to go in its own commit with a Fixes:

The lock here wasn't required before, because uvcg_complete_buffer was
only ever called by the completion handler, which is synchronized by
the usb controller. This is the reason we never saw an issue despite
not holding the lock.

This patch introduces another call site in uvcg_video_disable, so to
protect memory consistency, we need to make sure calls to 
uvcg_complete_buffer are synchronized on something other than
the usb controller.

> 
>>       }
>>
>>       spin_lock_irqsave(&video->req_lock, flags);
>> -    list_add_tail(&req->list, &video->req_free);
>> -    spin_unlock_irqrestore(&video->req_lock, flags);
>> -
>> -    if (uvc->state == UVC_STATE_STREAMING)
>> +    /*
>> +     * Video stream might have been disabled while we were
>> +     * processing the current usb_request. So make sure
>> +     * we're still streaming before queueing the usb_request
>> +     * back to req_free
>> +     */
>> +    if (video->is_enabled) {
>> +        list_add_tail(&req->list, &video->req_free);
>>           queue_work(video->async_wq, &video->pump);
>> +    } else {
>> +        uvc_video_free_request(ureq, ep);
>> +    }
>> +    spin_unlock_irqrestore(&video->req_lock, flags);
>>   }
>>
>>   static int
>> @@ -393,20 +421,22 @@ static void uvcg_video_pump(struct work_struct *work)
>>       struct uvc_video_queue *queue = &video->queue;
>>       /* video->max_payload_size is only set when using bulk transfer */
>>       bool is_bulk = video->max_payload_size;
>> -    struct uvc_device *uvc = video->uvc;
>>       struct usb_request *req = NULL;
>>       struct uvc_buffer *buf;
>>       unsigned long flags;
>>       bool buf_done;
>>       int ret;
>>
>> -    while (uvc->state == UVC_STATE_STREAMING && video->ep->enabled) {
>> +    while (true) {
>> +        if (!video->ep->enabled)
>> +            return;
>> +
>>           /*
>> -         * Retrieve the first available USB request, protected by the
>> -         * request lock.
>> +         * Check is_enabled and retrieve the first available USB
>> +         * request, protected by the request lock.
>>            */
>>           spin_lock_irqsave(&video->req_lock, flags);
>> -        if (list_empty(&video->req_free)) {
>> +        if (!video->is_enabled || list_empty(&video->req_free)) {
>>               spin_unlock_irqrestore(&video->req_lock, flags);
>>               return;
>>           }
>> @@ -488,9 +518,11 @@ static void uvcg_video_pump(struct work_struct *work)
>>           return;
>>
>>       spin_lock_irqsave(&video->req_lock, flags);
>> -    list_add_tail(&req->list, &video->req_free);
>> +    if (video->is_enabled)
>> +        list_add_tail(&req->list, &video->req_free);
>> +    else
>> +        uvc_video_free_request(req->context, video->ep);
>>       spin_unlock_irqrestore(&video->req_lock, flags);
>> -    return;
>>   }
>>
>>   /*
>> @@ -499,7 +531,11 @@ static void uvcg_video_pump(struct work_struct *work)
>>   int
>>   uvcg_video_disable(struct uvc_video *video)
>>   {
>> -    struct uvc_request *ureq;
>> +    unsigned long flags;
>> +    struct list_head inflight_bufs;
>> +    struct usb_request *req, *temp;
>> +    struct uvc_buffer *buf, *btemp;
>> +    struct uvc_request *ureq, *utemp;
>>
>>       if (video->ep == NULL) {
>>           uvcg_info(&video->uvc->func,
>> @@ -507,15 +543,58 @@ uvcg_video_disable(struct uvc_video *video)
>>           return -ENODEV;
>>       }
>>
>> +    INIT_LIST_HEAD(&inflight_bufs);
>> +    spin_lock_irqsave(&video->req_lock, flags);
>> +    video->is_enabled = false;
>> +
>> +    /*
>> +     * Remove any in-flight buffers from the uvc_requests
>> +     * because we want to return them before cancelling the
>> +     * queue. This ensures that we aren't stuck waiting for
>> +     * all complete callbacks to come through before disabling
>> +     * vb2 queue.
>> +     */
>> +    list_for_each_entry(ureq, &video->ureqs, list) {
>> +        if (ureq->last_buf) {
>> +            list_add_tail(&ureq->last_buf->queue, &inflight_bufs);
>> +            ureq->last_buf = NULL;
>> +        }
>> +    }
>> +    spin_unlock_irqrestore(&video->req_lock, flags);
>> +
>>       cancel_work_sync(&video->pump);
>>       uvcg_queue_cancel(&video->queue, 0);
>>
>> -    list_for_each_entry(ureq, &video->ureqs, list) {
>> -        if (ureq->req)
>> -            usb_ep_dequeue(video->ep, ureq->req);
>> +    spin_lock_irqsave(&video->req_lock, flags);
>> +    /*
>> +     * Remove all uvc_reqeusts from ureqs with list_del_init
>> +     * This lets uvc_video_free_request correctly identify
>> +     * if the uvc_request is attached to a list or not when freeing
>> +     * memory.
>> +     */
>> +    list_for_each_entry_safe(ureq, utemp, &video->ureqs, list)
>> +        list_del_init(&ureq->list);
>> +
>> +    list_for_each_entry_safe(req, temp, &video->req_free, list) {
>> +        list_del(&req->list);
>> +        uvc_video_free_request(req->context, video->ep);
>>       }
>>
>> -    uvc_video_free_requests(video);
>> +    INIT_LIST_HEAD(&video->ureqs);
>> +    INIT_LIST_HEAD(&video->req_free);
>> +    video->req_size = 0;
>> +    spin_unlock_irqrestore(&video->req_lock, flags);
>> +
>> +    /*
>> +     * Return all the video buffers before disabling the queue.
>> +     */
>> +    spin_lock_irqsave(&video->queue.irqlock, flags);
>> +    list_for_each_entry_safe(buf, btemp, &inflight_bufs, queue) {
>> +        list_del(&buf->queue);
>> +        uvcg_complete_buffer(&video->queue, buf);
>> +    }
>> +    spin_unlock_irqrestore(&video->queue.irqlock, flags);
>> +
>>       uvcg_queue_enable(&video->queue, 0);
>>       return 0;
>>   }
>> @@ -533,6 +612,14 @@ int uvcg_video_enable(struct uvc_video *video)
>>           return -ENODEV;
>>       }
>>
>> +    /*
>> +     * Safe to access request related fields without req_lock because
>> +     * this is the only thread currently active, and no other
>> +     * request handling thread will become active until this function
>> +     * returns.
>> +     */
>> +    video->is_enabled = true;
>> +
>>       if ((ret = uvcg_queue_enable(&video->queue, 1)) < 0)
>>           return ret;
>>
>> @@ -558,6 +645,7 @@ int uvcg_video_enable(struct uvc_video *video)
>>    */
>>   int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc)
>>   {
>> +    video->is_enabled = false;
>>       INIT_LIST_HEAD(&video->ureqs);
>>       INIT_LIST_HEAD(&video->req_free);
>>       spin_lock_init(&video->req_lock);
>> -- 
>> 2.42.0.820.g83a721a137-goog




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux