On Fri, Oct 13, 2023, Piyush Mehta wrote: > Add a reset-controller for supporting Xilinx versal platforms. To reset > the USB controller, get the reset ID from device-tree and using ID trigger > the reset, with the assert and deassert reset controller APIs for USB > controller initialization. > > Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxx> > --- > Changes in V2: > - Removed unnecessary delay between assert and deassert. > - Updated commit message. > > Link: https://urldefense.com/v3/__https://lore.kernel.org/all/20231005142215.1530-1-piyush.mehta@xxxxxxx/__;!!A4F2R9G_pg!bfb-RqDhjA0qIQNJAgzN9gEJwRreQtrSyytdCt-ysljuyyvoMnLB3onr7h2qLi3R0GQfn0SuAoW_I15iQSsRjvjV$ > --- > drivers/usb/dwc3/dwc3-xilinx.c | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c > index 19307d24f3a0..5b7e92f476de 100644 > --- a/drivers/usb/dwc3/dwc3-xilinx.c > +++ b/drivers/usb/dwc3/dwc3-xilinx.c > @@ -32,9 +32,6 @@ > #define XLNX_USB_TRAFFIC_ROUTE_CONFIG 0x005C > #define XLNX_USB_TRAFFIC_ROUTE_FPD 0x1 > > -/* Versal USB Reset ID */ > -#define VERSAL_USB_RESET_ID 0xC104036 > - > #define XLNX_USB_FPD_PIPE_CLK 0x7c > #define PIPE_CLK_DESELECT 1 > #define PIPE_CLK_SELECT 0 > @@ -72,20 +69,23 @@ static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask) > static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data) > { > struct device *dev = priv_data->dev; > + struct reset_control *crst; > int ret; > > + crst = devm_reset_control_get_exclusive(dev, NULL); > + if (IS_ERR(crst)) > + return dev_err_probe(dev, PTR_ERR(crst), "failed to get reset signal\n"); > + > dwc3_xlnx_mask_phy_rst(priv_data, false); > > /* Assert and De-assert reset */ > - ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID, > - PM_RESET_ACTION_ASSERT); > + ret = reset_control_assert(crst); > if (ret < 0) { > dev_err_probe(dev, ret, "failed to assert Reset\n"); > return ret; > } > > - ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID, > - PM_RESET_ACTION_RELEASE); > + ret = reset_control_deassert(crst); > if (ret < 0) { > dev_err_probe(dev, ret, "failed to De-assert Reset\n"); > return ret; > -- > 2.17.1 > Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> Thanks, Thinh
