Re: [PATCH v13 01/10] usb: dwc3: core: Access XHCI address space temporarily to read port info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/20/2023 2:02 PM, Johan Hovold wrote:
On Sat, Oct 07, 2023 at 09:17:57PM +0530, Krishna Kurapati wrote:
Currently host-only capable DWC3 controllers support Multiport.

You use the word "currently" in a few places like this (e.g. in comments
in the code). What exactly do you mean? That all current multiport
controllers are host-only, or that this is all that the driver supports
after your changes?

This means that, today the capable multiport controllers are host-only capable, not that the driver is designed that way.

Please rephrase accordingly throughout so that this becomes clear.

In any case it looks like the above sentence is at least missing an
"only".
+static int dwc3_read_port_info(struct dwc3 *dwc)
+{
+	void __iomem *base;
+	u8 major_revision;
+	u32 offset = 0;

I'd move the initialisation just before the loop.

+	u32 val;
+
+	/*
+	 * Remap xHCI address space to access XHCI ext cap regs,

Drop comma and merge with next line and break it closer to 80 chars
(instead of 65).

+	 * since it is needed to get port info.

s/since it is needed to get/which hold the/?

+	 */
+	base = ioremap(dwc->xhci_resources[0].start,
+				resource_size(&dwc->xhci_resources[0]));
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	do {
+		offset = xhci_find_next_ext_cap(base, offset,
+				XHCI_EXT_CAPS_PROTOCOL);
+		if (!offset)
+			break;
+
+		val = readl(base + offset);
+		major_revision = XHCI_EXT_PORT_MAJOR(val);
+
+		val = readl(base + offset + 0x08);
+		if (major_revision == 0x03) {
+			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
+		} else if (major_revision <= 0x02) {
+			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
+		} else {
+			dev_err(dwc->dev,

This should be dev_warn() (as in the xhci driver) now that you no longer
treat it as a fatal error.

+				"Unrecognized port major revision %d\n",

Merge this with the previous line (even if it makes that line 83 chars).

Use a lower case 'U' for consistency with most of the error messages.

Sure, will change this to dev_warn and modify the "u".

+							major_revision);
+		}
+	} while (1);
+
+	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
+			dwc->num_usb2_ports, dwc->num_usb3_ports);
+
+	iounmap(base);
+
+	return 0;
+}
+
  static int dwc3_probe(struct platform_device *pdev)
  {
  	struct device		*dev = &pdev->dev;
@@ -1846,6 +1892,7 @@ static int dwc3_probe(struct platform_device *pdev)
  	void __iomem		*regs;
  	struct dwc3		*dwc;
  	int			ret;
+	unsigned int		hw_mode;

Nit: I'd place this one before ret.
>>
  	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
  	if (!dwc)
@@ -1926,6 +1973,20 @@ static int dwc3_probe(struct platform_device *pdev)
  			goto err_disable_clks;
  	}
+ /*
+	 * Currently only DWC3 controllers that are host-only capable
+	 * support Multiport.
+	 */

So is this is a limitation of the hardware or implementation?


This is how the hardware is implemented today. I wanted to convey that "lets check for host-only condition before going for reading port info"

+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+		ret = dwc3_read_port_info(dwc);
+		if (ret)
+			goto err_disable_clks;
+	} else {
+		dwc->num_usb2_ports = 1;
+		dwc->num_usb3_ports = 1;
+	}
+
  	spin_lock_init(&dwc->lock);
  	mutex_init(&dwc->mutex);

Johan





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux