module_platform_driver_probe() has the advantage that the .probe() and .remove() calls can live in .init.text and .exit.text respectively and so some memory is saved. The downside is that dynamic bind and unbind are impossible. As the driver doesn't benefit from the advantages (both .probe and .remove are defined in plain .text), stop suffering from the downsides and use module_platform_driver() instead of module_platform_driver_probe(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- drivers/usb/gadget/udc/m66592-udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index e05f45a4b56b..bfaa5291e6c8 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1687,10 +1687,11 @@ static int m66592_probe(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ static struct platform_driver m66592_driver = { + .probe = m66592_probe, .remove_new = m66592_remove, .driver = { .name = udc_name, }, }; -module_platform_driver_probe(m66592_driver, m66592_probe); +module_platform_driver(m66592_driver); -- 2.42.0