Document bindings for this Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver. The PTN36502 can also run in GPIO mode where it is configured differently, without any I2C connection, but this is not supported yet. Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> --- .../devicetree/bindings/usb/nxp,ptn36502.yaml | 94 ++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml new file mode 100644 index 000000000000..eee548ac1abe --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nxp,ptn36502.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver + +maintainers: + - Luca Weiss <luca.weiss@xxxxxxxxxxxxx> + +properties: + compatible: + enum: + - nxp,ptn36502 + + reg: + maxItems: 1 + + vdd18-supply: + description: Power supply for VDD18 pin + + retimer-switch: + description: Flag the port as possible handle of SuperSpeed signals retiming + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@1a { + compatible = "nxp,ptn36502"; + reg = <0x1a>; + + vdd18-supply = <&usb_redrive_1v8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + port@1 { + reg = <1>; + phy_con_ss: endpoint { + remote-endpoint = <&usb_phy_ss>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... -- 2.42.0
