Re: [PATCH v6 3/3] usb: chipidea: Add support for NPCM

[Paul Menzel <pmenzel@xxxxxxxxxxxxx>]

Dear Tomer,


Thank you for your patch.

Am 13.10.23 um 01:00 schrieb Tomer Maimon:
> Add Nuvoton NPCM BMC SoCs support to USB ChipIdea driver.
> NPCM SoC include ChipIdea IP block that used for USB device controller

include*s*
“that *is* used” or just “… used for”

> mode.

Please add a line, how you tested this patch.

> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> Acked-by: Peter Chen <peter.chen@xxxxxxxxxx>
> ---
>   drivers/usb/chipidea/Kconfig        |   4 +
>   drivers/usb/chipidea/Makefile       |   1 +
>   drivers/usb/chipidea/ci_hdrc_npcm.c | 114 ++++++++++++++++++++++++++++
>   3 files changed, 119 insertions(+)
>   create mode 100644 drivers/usb/chipidea/ci_hdrc_npcm.c
>
> diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
> index c815824a0b2d..bab45bc62361 100644
> --- a/drivers/usb/chipidea/Kconfig
> +++ b/drivers/usb/chipidea/Kconfig
> @@ -43,6 +43,10 @@ config USB_CHIPIDEA_MSM
>   	tristate "Enable MSM hsusb glue driver" if EXPERT
>   	default USB_CHIPIDEA
>   
> +config USB_CHIPIDEA_NPCM
> +	tristate "Enable NPCM hsusb glue driver" if EXPERT
> +	default USB_CHIPIDEA
> +
>   config USB_CHIPIDEA_IMX
>   	tristate "Enable i.MX USB glue driver" if EXPERT
>   	depends on OF
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 71afeab97e83..718cb24603dd 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -13,6 +13,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM)		+= otg_fsm.o
>   
>   obj-$(CONFIG_USB_CHIPIDEA_GENERIC)	+= ci_hdrc_usb2.o
>   obj-$(CONFIG_USB_CHIPIDEA_MSM)		+= ci_hdrc_msm.o
> +obj-$(CONFIG_USB_CHIPIDEA_NPCM)		+= ci_hdrc_npcm.o
>   obj-$(CONFIG_USB_CHIPIDEA_PCI)		+= ci_hdrc_pci.o
>   obj-$(CONFIG_USB_CHIPIDEA_IMX)		+= usbmisc_imx.o ci_hdrc_imx.o
>   obj-$(CONFIG_USB_CHIPIDEA_TEGRA)	+= ci_hdrc_tegra.o
> diff --git a/drivers/usb/chipidea/ci_hdrc_npcm.c b/drivers/usb/chipidea/ci_hdrc_npcm.c
> new file mode 100644
> index 000000000000..37b64a3dbd96
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci_hdrc_npcm.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2023 Nuvoton Technology corporation.
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/usb/chipidea.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/reset-controller.h>
> +#include <linux/of.h>
> +
> +#include "ci.h"
> +
> +struct npcm_udc_data {
> +	struct platform_device	*ci;
> +	struct clk		*core_clk;
> +	struct ci_hdrc_platform_data pdata;
> +};
> +
> +static int npcm_udc_notify_event(struct ci_hdrc *ci, unsigned event)
> +{
> +	struct device *dev = ci->dev->parent;
> +
> +	switch (event) {
> +	case CI_HDRC_CONTROLLER_RESET_EVENT:
> +		/* clear all mode bits */
> +		hw_write(ci, OP_USBMODE, 0xffffffff, 0x0);
> +		break;
> +	default:
> +		dev_dbg(dev, "unknown ci_hdrc event\n");

Please print it out.

> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int npcm_udc_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct npcm_udc_data *ci;
> +	struct platform_device *plat_ci;
> +	struct device *dev = &pdev->dev;
> +
> +	ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
> +	if (!ci)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, ci);
> +
> +	ci->core_clk = devm_clk_get_optional(dev, NULL);
> +	if (IS_ERR(ci->core_clk))
> +		return PTR_ERR(ci->core_clk);
> +
> +	ret = clk_prepare_enable(ci->core_clk);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to enable the clock: %d\n", ret);
> +
> +	ci->pdata.name = dev_name(dev);
> +	ci->pdata.capoffset = DEF_CAPOFFSET;
> +	ci->pdata.flags	= CI_HDRC_REQUIRES_ALIGNED_DMA |
> +		CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS;
> +	ci->pdata.phy_mode = USBPHY_INTERFACE_MODE_UTMI;
> +	ci->pdata.notify_event = npcm_udc_notify_event;
> +
> +	plat_ci = ci_hdrc_add_device(dev, pdev->resource, pdev->num_resources,
> +				     &ci->pdata);
> +	if (IS_ERR(plat_ci)) {
> +		ret = PTR_ERR(plat_ci);
> +		dev_err(dev, "failed to register HDRC NPCM device: %d\n", ret);
> +		goto clk_err;
> +	}
> +
> +	pm_runtime_no_callbacks(dev);
> +	pm_runtime_enable(dev);
> +
> +	return 0;
> +
> +clk_err:
> +	clk_disable_unprepare(ci->core_clk);
> +	return ret;
> +}
> +
> +static int npcm_udc_remove(struct platform_device *pdev)
> +{
> +	struct npcm_udc_data *ci = platform_get_drvdata(pdev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +	ci_hdrc_remove_device(ci->ci);
> +	clk_disable_unprepare(ci->core_clk);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id npcm_udc_dt_match[] = {
> +	{ .compatible = "nuvoton,npcm750-udc", },
> +	{ .compatible = "nuvoton,npcm845-udc", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, npcm_udc_dt_match);
> +
> +static struct platform_driver npcm_udc_driver = {
> +	.probe = npcm_udc_probe,
> +	.remove = npcm_udc_remove,
> +	.driver = {
> +		.name = "npcm_udc",
> +		.of_match_table = npcm_udc_dt_match,
> +	},
> +};
> +
> +module_platform_driver(npcm_udc_driver);
> +
> +MODULE_DESCRIPTION("NPCM USB device controller driver");
> +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@xxxxxxxxxxx>");

Should that address also be recorded as the patch author?

> +MODULE_LICENSE("GPL v2");


Kind regards,

Paul