On Mon, Oct 02, 2023 at 05:51:40PM +0200, Benoît Monin wrote: > Following a firmware update of the modem, the interface for the AT > command port changed, so add it back. > > T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=1199 ProdID=90d3 Rev=00.06 > S: Manufacturer=Sierra Wireless, Incorporated > S: Product=Sierra Wireless EM9191 > S: SerialNumber=xxxxxxxxxxxxxxxx > C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim > I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > Signed-off-by: Benoît Monin <benoit.monin@xxxxxx> Now applied, thanks. Johan
