On Tue, Oct 10, 2023 at 10:27:32AM +0200, Jerome Brunet wrote:
>
> On Tue 10 Oct 2023 at 08:56, Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> > On Fri, Oct 06, 2023 at 12:10:28PM +0200, Jerome Brunet wrote:
> >> Initial tests with the gl3510 has been done on libretech aml-a311d-cc.
> >> A 50us reset was fine as long as the hub node was under the usb phy node it
> >> DT. DT schema does not allow that. Moving the hub under the dwc3 controller
> >> caused issues, such as:
> >>
> >> onboard-usb-hub 1-1: Failed to suspend device, error -32
> >> onboard-usb-hub 1-1: can't set config #1, error -71
> >> onboard-usb-hub 1-1: Failed to suspend device, error -32
> >> onboard-usb-hub 1-1: USB disconnect, device number 2
> >>
> >> Extending the reset duration solves the problem.
> >> Since there is no documentation available for this hub, it is difficult to
> >> know the actual required reset duration. 200us seems to work fine so far.
> >>
> >> Suggested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> >> Fixes: 65009ccf7e8f ("usb: misc: onboard_usb_hub: add Genesys Logic gl3510 hub support")
> >
> > I can't find this git id, what tree is it in?
>
> Silly mistake. I must have taken the git id I had before you merged it. Sorry.
> The correct tag with usb-next is
>
> Fixes: b447e9efe50a ("usb: misc: onboard_usb_hub: add Genesys Logic gl3510 hub support")
>
> Should I resend it ?
Please do.
