Implements the USB part of Intel USB-I2C/GPIO/SPI adapter device
named "La Jolla Cove Adapter" (LJCA).
The communication between the various LJCA module drivers and the
hardware will be muxed/demuxed by this driver. Three modules (
I2C, GPIO, and SPI) are supported currently.
Each sub-module of LJCA device is identified by type field within
the LJCA message header.
The sub-modules of LJCA can use ljca_transfer() to issue a transfer
between host and hardware. And ljca_register_event_cb is exported
to LJCA sub-module drivers for hardware event subscription.
The minimum code in ASL that covers this board is
Scope (\_SB.PCI0.DWC3.RHUB.HS01)
{
Device (GPIO)
{
Name (_ADR, Zero)
Name (_STA, 0x0F)
}
Device (I2C)
{
Name (_ADR, One)
Name (_STA, 0x0F)
}
Device (SPI)
{
Name (_ADR, 0x02)
Name (_STA, 0x0F)
}
}
Signed-off-by: Wentong Wu <wentong.wu@xxxxxxxxx>
Reviewed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/usb/misc/Kconfig | 13 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/usb-ljca.c | 902 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/usb/ljca.h | 145 +++++++
4 files changed, 1061 insertions(+)
create mode 100644 drivers/usb/misc/usb-ljca.c
create mode 100644 include/linux/usb/ljca.h
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 99b15b7..c510af7 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -165,6 +165,19 @@ config APPLE_MFI_FASTCHARGE
It is safe to say M here.
+config USB_LJCA
+ tristate "Intel La Jolla Cove Adapter support"
+ select AUXILIARY_BUS
+ depends on USB && ACPI
+ help
+ This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO
+ Master Adapter (LJCA). Additional drivers such as I2C_LJCA,
+ GPIO_LJCA and SPI_LJCA must be enabled in order to use the
+ functionality of the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called usb-ljca.
+
source "drivers/usb/misc/sisusbvga/Kconfig"
config USB_LD
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 1992cc2..0bc732bc 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_EMI62) += emi62.o
obj-$(CONFIG_USB_EZUSB_FX2) += ezusb.o
obj-$(CONFIG_APPLE_MFI_FASTCHARGE) += apple-mfi-fastcharge.o
+obj-$(CONFIG_USB_LJCA) += usb-ljca.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
diff --git a/drivers/usb/misc/usb-ljca.c b/drivers/usb/misc/usb-ljca.c
new file mode 100644
index 0000000..c9decd0
--- /dev/null
+++ b/drivers/usb/misc/usb-ljca.c
@@ -0,0 +1,902 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel La Jolla Cove Adapter USB driver
+ *
+ * Copyright (c) 2023, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/dev_printk.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/usb/ljca.h>
+
+#include <asm/unaligned.h>
+
+/* command flags */
+#define LJCA_ACK_FLAG BIT(0)
+#define LJCA_RESP_FLAG BIT(1)
+#define LJCA_CMPL_FLAG BIT(2)
+
+#define LJCA_MAX_PACKET_SIZE 64u
+#define LJCA_MAX_PAYLOAD_SIZE \
+ (LJCA_MAX_PACKET_SIZE - sizeof(struct ljca_msg))
+
+#define LJCA_WRITE_TIMEOUT_MS 200
+#define LJCA_WRITE_ACK_TIMEOUT_MS 500
+#define LJCA_ENUM_CLIENT_TIMEOUT_MS 20
+
+/* ljca client type */
+enum ljca_client_type {
+ LJCA_CLIENT_MNG = 1,
+ LJCA_CLIENT_GPIO = 3,
+ LJCA_CLIENT_I2C = 4,
+ LJCA_CLIENT_SPI = 5,
+};
+
+/* MNG client commands */
+enum ljca_mng_cmd {
+ LJCA_MNG_RESET = 2,
+ LJCA_MNG_ENUM_GPIO = 4,
+ LJCA_MNG_ENUM_I2C = 5,
+ LJCA_MNG_ENUM_SPI = 8,
+};
+
+/* ljca client acpi _ADR */
+enum ljca_client_acpi_adr {
+ LJCA_GPIO_ACPI_ADR,
+ LJCA_I2C1_ACPI_ADR,
+ LJCA_I2C2_ACPI_ADR,
+ LJCA_SPI1_ACPI_ADR,
+ LJCA_SPI2_ACPI_ADR,
+ LJCA_CLIENT_ACPI_ADR_MAX,
+};
+
+/* ljca cmd message structure */
+struct ljca_msg {
+ u8 type;
+ u8 cmd;
+ u8 flags;
+ u8 len;
+ u8 data[] __counted_by(len);
+} __packed;
+
+struct ljca_i2c_ctr_info {
+ u8 id;
+ u8 capacity;
+ u8 intr_pin;
+} __packed;
+
+struct ljca_i2c_descriptor {
+ u8 num;
+ struct ljca_i2c_ctr_info info[] __counted_by(num);
+} __packed;
+
+struct ljca_spi_ctr_info {
+ u8 id;
+ u8 capacity;
+ u8 intr_pin;
+} __packed;
+
+struct ljca_spi_descriptor {
+ u8 num;
+ struct ljca_spi_ctr_info info[] __counted_by(num);
+} __packed;
+
+struct ljca_bank_descriptor {
+ u8 bank_id;
+ u8 pin_num;
+
+ /* 1 bit for each gpio, 1 means valid */
+ __le32 valid_pins;
+} __packed;
+
+struct ljca_gpio_descriptor {
+ u8 pins_per_bank;
+ u8 bank_num;
+ struct ljca_bank_descriptor bank_desc[] __counted_by(bank_num);
+} __packed;
+
+/**
+ * struct ljca_adapter - represent a ljca adapter
+ *
+ * @intf: the usb interface for this ljca adapter
+ * @usb_dev: the usb device for this ljca adapter
+ * @dev: the specific device info of the usb interface
+ * @rx_pipe: bulk in pipe for receive data from firmware
+ * @tx_pipe: bulk out pipe for send data to firmware
+ * @rx_urb: urb used for the bulk in pipe
+ * @rx_buf: buffer used to receive command response and event
+ * @rx_len: length of rx buffer
+ * @ex_buf: external buffer to save command response
+ * @ex_buf_len: length of external buffer
+ * @actual_length: actual length of data copied to external buffer
+ * @tx_buf: buffer used to download command to firmware
+ * @tx_buf_len: length of tx buffer
+ * @lock: spinlock to protect tx_buf and ex_buf
+ * @cmd_completion: completion object as the command receives ack
+ * @mutex: mutex to avoid command download concurrently
+ * @client_list: client device list
+ * @disconnect: usb disconnect ongoing or not
+ * @reset_id: used to reset firmware
+ */
+struct ljca_adapter {
+ struct usb_interface *intf;
+ struct usb_device *usb_dev;
+ struct device *dev;
+
+ unsigned int rx_pipe;
+ unsigned int tx_pipe;
+
+ struct urb *rx_urb;
+ void *rx_buf;
+ unsigned int rx_len;
+
+ u8 *ex_buf;
+ u8 ex_buf_len;
+ u8 actual_length;
+
+ void *tx_buf;
+ u8 tx_buf_len;
+
+ spinlock_t lock;
+
+ struct completion cmd_completion;
+ struct mutex mutex;
+
+ struct list_head client_list;
+
+ bool disconnect;
+
+ u32 reset_id;
+};
+
+struct ljca_match_ids_walk_data {
+ const struct acpi_device_id *ids;
+ const char *uid;
+ struct acpi_device *adev;
+};
+
+static const struct acpi_device_id ljca_gpio_hids[] = {
+ { "INTC1074" },
+ { "INTC1096" },
+ { "INTC100B" },
+ { "INTC10D1" },
+ {},
+};
+
+static const struct acpi_device_id ljca_i2c_hids[] = {
+ { "INTC1075" },
+ { "INTC1097" },
+ { "INTC100C" },
+ { "INTC10D2" },
+ {},
+};
+
+static const struct acpi_device_id ljca_spi_hids[] = {
+ { "INTC1091" },
+ { "INTC1098" },
+ { "INTC100D" },
+ { "INTC10D3" },
+ {},
+};
+
+static void ljca_handle_event(struct ljca_adapter *adap,
+ struct ljca_msg *header)
+{
+ struct ljca_client *client;
+
+ list_for_each_entry(client, &adap->client_list, link) {
+ /*
+ * Currently only GPIO register event callback, but
+ * firmware message structure should include id when
+ * multiple same type clients register event callback.
+ */
+ if (client->type == header->type) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&client->event_cb_lock, flags);
+ client->event_cb(client->context, header->cmd,
+ header->data, header->len);
+ spin_unlock_irqrestore(&client->event_cb_lock, flags);
+
+ break;
+ }
+ }
+}
+
+/* process command ack and received data if available */
+static void ljca_handle_cmd_ack(struct ljca_adapter *adap, struct ljca_msg *header)
+{
+ struct ljca_msg *tx_header = adap->tx_buf;
+ u8 ibuf_len, actual_len = 0;
+ unsigned long flags;
+ u8 *ibuf;
+
+ spin_lock_irqsave(&adap->lock, flags);
+
+ if (tx_header->type != header->type || tx_header->cmd != header->cmd) {
+ spin_unlock_irqrestore(&adap->lock, flags);
+ dev_err(adap->dev, "cmd ack mismatch error\n");
+ return;
+ }
+
+ ibuf_len = adap->ex_buf_len;
+ ibuf = adap->ex_buf;
+
+ if (ibuf && ibuf_len) {
+ actual_len = min(header->len, ibuf_len);
+
+ /* copy received data to external buffer */
+ memcpy(ibuf, header->data, actual_len);
+ }
+ /* update copied data length */
+ adap->actual_length = actual_len;
+
+ spin_unlock_irqrestore(&adap->lock, flags);
+
+ complete(&adap->cmd_completion);
+}
+
+static void ljca_recv(struct urb *urb)
+{
+ struct ljca_msg *header = urb->transfer_buffer;
+ struct ljca_adapter *adap = urb->context;
+ int ret;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ENOENT:
+ /*
+ * directly complete the possible ongoing transfer
+ * during disconnect
+ */
+ if (adap->disconnect)
+ complete(&adap->cmd_completion);
+ return;
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ case -EPIPE:
+ /* rx urb is terminated */
+ dev_dbg(adap->dev, "rx urb terminated with status: %d\n",
+ urb->status);
+ return;
+ default:
+ dev_dbg(adap->dev, "rx urb error: %d\n", urb->status);
+ goto resubmit;
+ }
+
+ if (header->len + sizeof(*header) != urb->actual_length)
+ goto resubmit;
+
+ if (header->flags & LJCA_ACK_FLAG)
+ ljca_handle_cmd_ack(adap, header);
+ else
+ ljca_handle_event(adap, header);
+
+resubmit:
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret && ret != -EPERM)
+ dev_err(adap->dev, "resubmit rx urb error %d\n", ret);
+}
+
+static int ljca_send(struct ljca_adapter *adap, u8 type, u8 cmd,
+ const u8 *obuf, u8 obuf_len, u8 *ibuf, u8 ibuf_len,
+ bool ack, unsigned long timeout)
+{
+ unsigned int msg_len = sizeof(struct ljca_msg) + obuf_len;
+ struct ljca_msg *header = adap->tx_buf;
+ unsigned int transferred;
+ unsigned long flags;
+ int ret;
+
+ if (adap->disconnect)
+ return -ENODEV;
+
+ if (msg_len > adap->tx_buf_len)
+ return -EINVAL;
+
+ mutex_lock(&adap->mutex);
+
+ spin_lock_irqsave(&adap->lock, flags);
+
+ header->type = type;
+ header->cmd = cmd;
+ header->len = obuf_len;
+ if (obuf)
+ memcpy(header->data, obuf, obuf_len);
+
+ header->flags = LJCA_CMPL_FLAG | (ack ? LJCA_ACK_FLAG : 0);
+
+ adap->ex_buf = ibuf;
+ adap->ex_buf_len = ibuf_len;
+ adap->actual_length = 0;
+
+ spin_unlock_irqrestore(&adap->lock, flags);
+
+ reinit_completion(&adap->cmd_completion);
+
+ ret = usb_autopm_get_interface(adap->intf);
+ if (ret < 0)
+ goto out;
+
+ ret = usb_bulk_msg(adap->usb_dev, adap->tx_pipe, header,
+ msg_len, &transferred, LJCA_WRITE_TIMEOUT_MS);
+
+ usb_autopm_put_interface(adap->intf);
+
+ if (ret < 0)
+ goto out;
+ if (transferred != msg_len) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (ack) {
+ ret = wait_for_completion_timeout(&adap->cmd_completion,
+ timeout);
+ if (!ret) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ }
+ ret = adap->actual_length;
+
+out:
+ spin_lock_irqsave(&adap->lock, flags);
+ adap->ex_buf = NULL;
+ adap->ex_buf_len = 0;
+
+ memset(header, 0, sizeof(*header));
+ spin_unlock_irqrestore(&adap->lock, flags);
+
+ mutex_unlock(&adap->mutex);
+
+ return ret;
+}
+
+int ljca_transfer(struct ljca_client *client, u8 cmd, const u8 *obuf,
+ u8 obuf_len, u8 *ibuf, u8 ibuf_len)
+{
+ return ljca_send(client->adapter, client->type, cmd,
+ obuf, obuf_len, ibuf, ibuf_len, true,
+ LJCA_WRITE_ACK_TIMEOUT_MS);
+}
+EXPORT_SYMBOL_NS_GPL(ljca_transfer, LJCA);
+
+int ljca_transfer_noack(struct ljca_client *client, u8 cmd, const u8 *obuf,
+ u8 obuf_len)
+{
+ return ljca_send(client->adapter, client->type, cmd, obuf,
+ obuf_len, NULL, 0, false, LJCA_WRITE_ACK_TIMEOUT_MS);
+}
+EXPORT_SYMBOL_NS_GPL(ljca_transfer_noack, LJCA);
+
+int ljca_register_event_cb(struct ljca_client *client, ljca_event_cb_t event_cb,
+ void *context)
+{
+ unsigned long flags;
+
+ if (!event_cb)
+ return -EINVAL;
+
+ spin_lock_irqsave(&client->event_cb_lock, flags);
+
+ if (client->event_cb) {
+ spin_unlock_irqrestore(&client->event_cb_lock, flags);
+ return -EALREADY;
+ }
+
+ client->event_cb = event_cb;
+ client->context = context;
+
+ spin_unlock_irqrestore(&client->event_cb_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(ljca_register_event_cb, LJCA);
+
+void ljca_unregister_event_cb(struct ljca_client *client)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&client->event_cb_lock, flags);
+
+ client->event_cb = NULL;
+ client->context = NULL;
+
+ spin_unlock_irqrestore(&client->event_cb_lock, flags);
+}
+EXPORT_SYMBOL_NS_GPL(ljca_unregister_event_cb, LJCA);
+
+static int ljca_match_device_ids(struct acpi_device *adev, void *data)
+{
+ struct ljca_match_ids_walk_data *wd = data;
+ const char *uid = acpi_device_uid(adev);
+
+ if (acpi_match_device_ids(adev, wd->ids))
+ return 0;
+
+ if (!wd->uid)
+ goto match;
+
+ if (!uid)
+ /*
+ * Some DSDTs have only one ACPI companion for the two I2C
+ * controllers and they don't set a UID at all (e.g. Dell
+ * Latitude 9420). On these platforms only the first I2C
+ * controller is used, so if a HID match has no UID we use
+ * "0" as the UID and assign ACPI companion to the first
+ * I2C controller.
+ */
+ uid = "0";
+ else
+ uid = strchr(uid, wd->uid[0]);
+
+ if (!uid || strcmp(uid, wd->uid))
+ return 0;
+
+match:
+ wd->adev = adev;
+
+ return 1;
+}
+
+/* bind auxiliary device to acpi device */
+static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap,
+ struct auxiliary_device *auxdev,
+ u64 adr, u8 id)
+{
+ struct ljca_match_ids_walk_data wd = { 0 };
+ struct acpi_device *parent, *adev;
+ struct device *dev = adap->dev;
+ char uid[4];
+
+ parent = ACPI_COMPANION(dev);
+ if (!parent)
+ return;
+
+ /*
+ * get auxdev ACPI handle from the ACPI device directly
+ * under the parent that matches _ADR.
+ */
+ adev = acpi_find_child_device(parent, adr, false);
+ if (adev) {
+ ACPI_COMPANION_SET(&auxdev->dev, adev);
+ return;
+ }
+
+ /*
+ * _ADR is a grey area in the ACPI specification, some
+ * platforms use _HID to distinguish children devices.
+ */
+ switch (adr) {
+ case LJCA_GPIO_ACPI_ADR:
+ wd.ids = ljca_gpio_hids;
+ break;
+ case LJCA_I2C1_ACPI_ADR:
+ case LJCA_I2C2_ACPI_ADR:
+ snprintf(uid, sizeof(uid), "%d", id);
+ wd.uid = uid;
+ wd.ids = ljca_i2c_hids;
+ break;
+ case LJCA_SPI1_ACPI_ADR:
+ case LJCA_SPI2_ACPI_ADR:
+ wd.ids = ljca_spi_hids;
+ break;
+ default:
+ dev_warn(dev, "unsupported _ADR\n");
+ return;
+ }
+
+ acpi_dev_for_each_child(parent, ljca_match_device_ids, &wd);
+ if (wd.adev) {
+ ACPI_COMPANION_SET(&auxdev->dev, wd.adev);
+ return;
+ }
+
+ parent = ACPI_COMPANION(dev->parent->parent);
+ if (!parent)
+ return;
+
+ acpi_dev_for_each_child(parent, ljca_match_device_ids, &wd);
+ if (wd.adev)
+ ACPI_COMPANION_SET(&auxdev->dev, wd.adev);
+}
+
+static void ljca_auxdev_release(struct device *dev)
+{
+ struct auxiliary_device *auxdev = to_auxiliary_dev(dev);
+
+ kfree(auxdev->dev.platform_data);
+}
+
+static int ljca_new_client_device(struct ljca_adapter *adap, u8 type, u8 id,
+ char *name, void *data, u64 adr)
+{
+ struct auxiliary_device *auxdev;
+ struct ljca_client *client;
+ int ret;
+
+ client = kzalloc(sizeof *client, GFP_KERNEL);
+ if (!client)
+ return -ENOMEM;
+
+ client->type = type;
+ client->id = id;
+ client->adapter = adap;
+ spin_lock_init(&client->event_cb_lock);
+
+ auxdev = &client->auxdev;
+ auxdev->name = name;
+ auxdev->id = id;
+
+ auxdev->dev.parent = adap->dev;
+ auxdev->dev.platform_data = data;
+ auxdev->dev.release = ljca_auxdev_release;
+
+ ret = auxiliary_device_init(auxdev);
+ if (ret)
+ goto err_free;
+
+ ljca_auxdev_acpi_bind(adap, auxdev, adr, id);
+
+ ret = auxiliary_device_add(auxdev);
+ if (ret)
+ goto err_uninit;
+
+ list_add_tail(&client->link, &adap->client_list);
+
+ return 0;
+
+err_uninit:
+ auxiliary_device_uninit(auxdev);
+
+err_free:
+ kfree(client);
+
+ return ret;
+}
+
+static int ljca_enumerate_gpio(struct ljca_adapter *adap)
+{
+ u32 valid_pin[LJCA_MAX_GPIO_NUM / BITS_PER_TYPE(u32)];
+ struct ljca_gpio_descriptor *desc;
+ struct ljca_gpio_info *gpio_info;
+ u8 buf[LJCA_MAX_PAYLOAD_SIZE];
+ int ret, gpio_num;
+ unsigned int i;
+
+ ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_GPIO, NULL, 0, buf,
+ sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS);
+ if (ret < 0)
+ return ret;
+
+ /* check firmware response */
+ desc = (struct ljca_gpio_descriptor *)buf;
+ if (ret != struct_size(desc, bank_desc, desc->bank_num))
+ return -EINVAL;
+
+ gpio_num = desc->pins_per_bank * desc->bank_num;
+ if (gpio_num > LJCA_MAX_GPIO_NUM)
+ return -EINVAL;
+
+ /* construct platform data */
+ gpio_info = kzalloc(sizeof *gpio_info, GFP_KERNEL);
+ if (!gpio_info)
+ return -ENOMEM;
+ gpio_info->num = gpio_num;
+
+ for (i = 0; i < desc->bank_num; i++)
+ valid_pin[i] = get_unaligned_le32(&desc->bank_desc[i].valid_pins);
+ bitmap_from_arr32(gpio_info->valid_pin_map, valid_pin, gpio_num);
+
+ ret = ljca_new_client_device(adap, LJCA_CLIENT_GPIO, 0, "ljca-gpio",
+ gpio_info, LJCA_GPIO_ACPI_ADR);
+ if (ret)
+ kfree(gpio_info);
+
+ return ret;
+}
+
+static int ljca_enumerate_i2c(struct ljca_adapter *adap)
+{
+ struct ljca_i2c_descriptor *desc;
+ struct ljca_i2c_info *i2c_info;
+ u8 buf[LJCA_MAX_PAYLOAD_SIZE];
+ unsigned int i;
+ int ret;
+
+ ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_I2C, NULL, 0, buf,
+ sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS);
+ if (ret < 0)
+ return ret;
+
+ /* check firmware response */
+ desc = (struct ljca_i2c_descriptor *)buf;
+ if (ret != struct_size(desc, info, desc->num))
+ return -EINVAL;
+
+ for (i = 0; i < desc->num; i++) {
+ /* construct platform data */
+ i2c_info = kzalloc(sizeof *i2c_info, GFP_KERNEL);
+ if (!i2c_info)
+ return -ENOMEM;
+
+ i2c_info->id = desc->info[i].id;
+ i2c_info->capacity = desc->info[i].capacity;
+ i2c_info->intr_pin = desc->info[i].intr_pin;
+
+ ret = ljca_new_client_device(adap, LJCA_CLIENT_I2C, i,
+ "ljca-i2c", i2c_info,
+ LJCA_I2C1_ACPI_ADR + i);
+ if (ret) {
+ kfree(i2c_info);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int ljca_enumerate_spi(struct ljca_adapter *adap)
+{
+ struct ljca_spi_descriptor *desc;
+ struct ljca_spi_info *spi_info;
+ u8 buf[LJCA_MAX_PAYLOAD_SIZE];
+ unsigned int i;
+ int ret;
+
+ ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_SPI, NULL, 0, buf,
+ sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS);
+ if (ret < 0)
+ return ret;
+
+ /* check firmware response */
+ desc = (struct ljca_spi_descriptor *)buf;
+ if (ret != struct_size(desc, info, desc->num))
+ return -EINVAL;
+
+ for (i = 0; i < desc->num; i++) {
+ /* construct platform data */
+ spi_info = kzalloc(sizeof *spi_info, GFP_KERNEL);
+ if (!spi_info)
+ return -ENOMEM;
+
+ spi_info->id = desc->info[i].id;
+ spi_info->capacity = desc->info[i].capacity;
+
+ ret = ljca_new_client_device(adap, LJCA_CLIENT_SPI, i,
+ "ljca-spi", spi_info,
+ LJCA_SPI1_ACPI_ADR + i);
+ if (ret) {
+ kfree(spi_info);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int ljca_reset_handshake(struct ljca_adapter *adap)
+{
+ __le32 reset_id = cpu_to_le32(adap->reset_id);
+ __le32 reset_id_ret = 0;
+ int ret;
+
+ adap->reset_id++;
+
+ ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_RESET, (u8 *)&reset_id,
+ sizeof(__le32), (u8 *)&reset_id_ret, sizeof(__le32),
+ true, LJCA_WRITE_ACK_TIMEOUT_MS);
+ if (ret < 0)
+ return ret;
+
+ if (reset_id_ret != reset_id)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ljca_enumerate_clients(struct ljca_adapter *adap)
+{
+ struct ljca_client *client, *next;
+ int ret;
+
+ ret = ljca_reset_handshake(adap);
+ if (ret)
+ goto err_kill;
+
+ ret = ljca_enumerate_gpio(adap);
+ if (ret) {
+ dev_err(adap->dev, "enumerate GPIO error\n");
+ goto err_kill;
+ }
+
+ ret = ljca_enumerate_i2c(adap);
+ if (ret) {
+ dev_err(adap->dev, "enumerate I2C error\n");
+ goto err_kill;
+ }
+
+ ret = ljca_enumerate_spi(adap);
+ if (ret) {
+ dev_err(adap->dev, "enumerate SPI error\n");
+ goto err_kill;
+ }
+
+ return 0;
+
+err_kill:
+ adap->disconnect = true;
+
+ usb_kill_urb(adap->rx_urb);
+
+ list_for_each_entry_safe_reverse(client, next, &adap->client_list, link) {
+ auxiliary_device_delete(&client->auxdev);
+ auxiliary_device_uninit(&client->auxdev);
+
+ list_del_init(&client->link);
+ kfree(client);
+ }
+
+ return ret;
+}
+
+static int ljca_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(interface);
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *ep_in, *ep_out;
+ struct device *dev = &interface->dev;
+ struct ljca_adapter *adap;
+ int ret;
+
+ adap = devm_kzalloc(dev, sizeof(*adap), GFP_KERNEL);
+ if (!adap)
+ return -ENOMEM;
+
+ /* separate tx buffer allocation for alignment */
+ adap->tx_buf = devm_kzalloc(dev, LJCA_MAX_PACKET_SIZE, GFP_KERNEL);
+ if (!adap->tx_buf)
+ return -ENOMEM;
+ adap->tx_buf_len = LJCA_MAX_PACKET_SIZE;
+
+ mutex_init(&adap->mutex);
+ spin_lock_init(&adap->lock);
+ init_completion(&adap->cmd_completion);
+ INIT_LIST_HEAD(&adap->client_list);
+
+ adap->intf = usb_get_intf(interface);
+ adap->usb_dev = usb_dev;
+ adap->dev = dev;
+
+ /*
+ * find the first bulk in and out endpoints.
+ * ignore any others.
+ */
+ ret = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL);
+ if (ret) {
+ dev_err(dev, "bulk endpoints not found\n");
+ goto err_put;
+ }
+ adap->rx_pipe = usb_rcvbulkpipe(usb_dev, usb_endpoint_num(ep_in));
+ adap->tx_pipe = usb_sndbulkpipe(usb_dev, usb_endpoint_num(ep_out));
+
+ /* setup rx buffer */
+ adap->rx_len = usb_endpoint_maxp(ep_in);
+ adap->rx_buf = devm_kzalloc(dev, adap->rx_len, GFP_KERNEL);
+ if (!adap->rx_buf) {
+ ret = -ENOMEM;
+ goto err_put;
+ }
+
+ /* alloc rx urb */
+ adap->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!adap->rx_urb) {
+ ret = -ENOMEM;
+ goto err_put;
+ }
+ usb_fill_bulk_urb(adap->rx_urb, usb_dev, adap->rx_pipe,
+ adap->rx_buf, adap->rx_len, ljca_recv, adap);
+
+ usb_set_intfdata(interface, adap);
+
+ /* submit rx urb before enumerate clients */
+ ret = usb_submit_urb(adap->rx_urb, GFP_KERNEL);
+ if (ret) {
+ dev_err(dev, "submit rx urb failed: %d\n", ret);
+ goto err_free;
+ }
+
+ ret = ljca_enumerate_clients(adap);
+ if (ret)
+ goto err_free;
+
+ usb_enable_autosuspend(usb_dev);
+
+ return 0;
+
+err_free:
+ usb_free_urb(adap->rx_urb);
+
+err_put:
+ usb_put_intf(adap->intf);
+
+ mutex_destroy(&adap->mutex);
+
+ return ret;
+}
+
+static void ljca_disconnect(struct usb_interface *interface)
+{
+ struct ljca_adapter *adap = usb_get_intfdata(interface);
+ struct ljca_client *client, *next;
+
+ adap->disconnect = true;
+
+ usb_kill_urb(adap->rx_urb);
+
+ list_for_each_entry_safe_reverse(client, next, &adap->client_list, link) {
+ auxiliary_device_delete(&client->auxdev);
+ auxiliary_device_uninit(&client->auxdev);
+
+ list_del_init(&client->link);
+ kfree(client);
+ }
+
+ usb_free_urb(adap->rx_urb);
+
+ usb_put_intf(adap->intf);
+
+ mutex_destroy(&adap->mutex);
+}
+
+static int ljca_suspend(struct usb_interface *interface, pm_message_t message)
+{
+ struct ljca_adapter *adap = usb_get_intfdata(interface);
+
+ usb_kill_urb(adap->rx_urb);
+
+ return 0;
+}
+
+static int ljca_resume(struct usb_interface *interface)
+{
+ struct ljca_adapter *adap = usb_get_intfdata(interface);
+
+ return usb_submit_urb(adap->rx_urb, GFP_KERNEL);
+}
+
+static const struct usb_device_id ljca_table[] = {
+ { USB_DEVICE(0x8086, 0x0b63) },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(usb, ljca_table);
+
+static struct usb_driver ljca_driver = {
+ .name = "ljca",
+ .id_table = ljca_table,
+ .probe = ljca_probe,
+ .disconnect = ljca_disconnect,
+ .suspend = ljca_suspend,
+ .resume = ljca_resume,
+ .supports_autosuspend = 1,
+};
+module_usb_driver(ljca_driver);
+
+MODULE_AUTHOR("Wentong Wu <wentong.wu@xxxxxxxxx>");
+MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@xxxxxxxxx>");
+MODULE_AUTHOR("Lixu Zhang <lixu.zhang@xxxxxxxxx>");
+MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/ljca.h b/include/linux/usb/ljca.h
new file mode 100644
index 0000000..47661fe
--- /dev/null
+++ b/include/linux/usb/ljca.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023, Intel Corporation. All rights reserved.
+ */
+#ifndef _LINUX_USB_LJCA_H_
+#define _LINUX_USB_LJCA_H_
+
+#include <linux/auxiliary_bus.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define LJCA_MAX_GPIO_NUM 64
+
+#define auxiliary_dev_to_ljca_client(auxiliary_dev) \
+ container_of(auxiliary_dev, struct ljca_client, auxdev)
+
+struct ljca_adapter;
+
+/**
+ * typedef ljca_event_cb_t - event callback function signature
+ *
+ * @context: the execution context of who registered this callback
+ * @cmd: the command from device for this event
+ * @evt_data: the event data payload
+ * @len: the event data payload length
+ *
+ * The callback function is called in interrupt context and the data payload is
+ * only valid during the call. If the user needs later access of the data, it
+ * must copy it.
+ */
+typedef void (*ljca_event_cb_t)(void *context, u8 cmd, const void *evt_data, int len);
+
+/**
+ * struct ljca_client - represent a ljca client device
+ *
+ * @type: ljca client type
+ * @id: ljca client id within same client type
+ * @link: ljca client on the same ljca adapter
+ * @auxdev: auxiliary device object
+ * @adapter: ljca adapter the ljca client sit on
+ * @context: the execution context of the event callback
+ * @event_cb: ljca client driver register this callback to get
+ * firmware asynchronous rx buffer pending notifications
+ * @event_cb_lock: spinlock to protect event callback
+ */
+struct ljca_client {
+ u8 type;
+ u8 id;
+ struct list_head link;
+ struct auxiliary_device auxdev;
+ struct ljca_adapter *adapter;
+
+ void *context;
+ ljca_event_cb_t event_cb;
+ /* lock to protect event_cb */
+ spinlock_t event_cb_lock;
+};
+
+/**
+ * struct ljca_gpio_info - ljca gpio client device info
+ *
+ * @num: ljca gpio client device pin number
+ * @valid_pin_map: ljca gpio client device valid pin mapping
+ */
+struct ljca_gpio_info {
+ unsigned int num;
+ DECLARE_BITMAP(valid_pin_map, LJCA_MAX_GPIO_NUM);
+};
+
+/**
+ * struct ljca_i2c_info - ljca i2c client device info
+ *
+ * @id: ljca i2c client device identification number
+ * @capacity: ljca i2c client device capacity
+ * @intr_pin: ljca i2c client device interrupt pin number if exists
+ */
+struct ljca_i2c_info {
+ u8 id;
+ u8 capacity;
+ u8 intr_pin;
+};
+
+/**
+ * struct ljca_spi_info - ljca spi client device info
+ *
+ * @id: ljca spi client device identification number
+ * @capacity: ljca spi client device capacity
+ */
+struct ljca_spi_info {
+ u8 id;
+ u8 capacity;
+};
+
+/**
+ * ljca_register_event_cb - register a callback function to receive events
+ *
+ * @client: ljca client device
+ * @event_cb: callback function
+ * @context: execution context of event callback
+ *
+ * Return: 0 in case of success, negative value in case of error
+ */
+int ljca_register_event_cb(struct ljca_client *client, ljca_event_cb_t event_cb, void *context);
+
+/**
+ * ljca_unregister_event_cb - unregister the callback function for an event
+ *
+ * @client: ljca client device
+ */
+void ljca_unregister_event_cb(struct ljca_client *client);
+
+/**
+ * ljca_transfer - issue a LJCA command and wait for a response
+ *
+ * @client: ljca client device
+ * @cmd: the command to be sent to the device
+ * @obuf: the buffer to be sent to the device; it can be NULL if the user
+ * doesn't need to transmit data with this command
+ * @obuf_len: the size of the buffer to be sent to the device; it should
+ * be 0 when obuf is NULL
+ * @ibuf: any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len: must be initialized to the input buffer size
+ *
+ * Return: the actual length of response data for success, negative value for errors
+ */
+int ljca_transfer(struct ljca_client *client, u8 cmd, const u8 *obuf,
+ u8 obuf_len, u8 *ibuf, u8 ibuf_len);
+
+/**
+ * ljca_transfer_noack - issue a LJCA command without a response
+ *
+ * @client: ljca client device
+ * @cmd: the command to be sent to the device
+ * @obuf: the buffer to be sent to the device; it can be NULL if the user
+ * doesn't need to transmit data with this command
+ * @obuf_len: the size of the buffer to be sent to the device
+ *
+ * Return: 0 for success, negative value for errors
+ */
+int ljca_transfer_noack(struct ljca_client *client, u8 cmd, const u8 *obuf,
+ u8 obuf_len);
+
+#endif
--
2.7.4
