On Fri, Oct 6, 2023 at 3:45 PM Duje Mihanović <duje.mihanovic@xxxxxxxx> wrote:
>
> Sharp's Spitz board still uses the legacy GPIO interface for configuring
> its two onboard LEDs.
>
> Convert them to use the GPIO descriptor interface.
>
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx>
> ---
> arch/arm/mach-pxa/spitz.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 535e2b2e997b..1fb4102ea39e 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {}
> * LEDs
> ******************************************************************************/
> #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
> +static struct gpiod_lookup_table spitz_led_gpio_table = {
> + .dev_id = "leds-gpio",
> + .table = {
> + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0,
> + GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1,
> + GPIO_ACTIVE_HIGH),
> + { }
> + }
> +};
> +
> static struct gpio_led spitz_gpio_leds[] = {
> {
> .name = "spitz:amber:charge",
> .default_trigger = "sharpsl-charge",
> - .gpio = SPITZ_GPIO_LED_ORANGE,
> },
> {
> .name = "spitz:green:hddactivity",
> .default_trigger = "disk-activity",
> - .gpio = SPITZ_GPIO_LED_GREEN,
> },
> };
>
> @@ -480,7 +489,14 @@ static struct platform_device spitz_led_device = {
>
> static void __init spitz_leds_init(void)
> {
> + struct gpio_descs *leds;
This should be global, otherwise KASAN will complain.
Bart
> +
> + gpiod_add_lookup_table(&spitz_led_gpio_table);
> platform_device_register(&spitz_led_device);
> + leds = gpiod_get_array_optional(&spitz_led_device.dev,
> + NULL, GPIOD_ASIS);
> + spitz_gpio_leds[0].gpiod = leds->desc[0];
> + spitz_gpio_leds[1].gpiod = leds->desc[1];
> }
> #else
> static inline void spitz_leds_init(void) {}
>
> --
> 2.42.0
>
>
