If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v2:
- ("Check for unplug in r8153b_ups_en() / r8153c_ups_en()") new for v2.
drivers/net/usb/r8152.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index fff2f9e67b5f..888d3884821e 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3663,6 +3663,8 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable)
int i;
for (i = 0; i < 500; i++) {
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
AUTOLOAD_DONE)
break;
@@ -3703,6 +3705,8 @@ static void r8153c_ups_en(struct r8152 *tp, bool enable)
int i;
for (i = 0; i < 500; i++) {
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
AUTOLOAD_DONE)
break;
--
2.42.0.582.g8ccd20d70d-goog
