This patch set add USB device controller for the NPCM Baseboard Management Controllers (BMC). NPCM UDC driver is a part of the USB ChipIdea driver. Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active parameter to active in case the ChipIdea USB IP role is device-only and there is no otgsc register. BMC NPCM7XX and BMC NPCM8XX has ten identical NPCM UDC modules, The NPCM UDC were tested on NPCM845 evaluation board. Changes since version 3: - Add Acked-by Peter Chen. Changes since version 2: - Use dev_err_probe. - Remove MODULE_ALIAS. Changes since version 1: - Add SoC specific compatible. - Remove USB phy mux property from dt-binding, will be handled differently. - Add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS commit to this patch set. Tomer Maimon (3): usb: chipidea: add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag dt-bindings: usb: ci-hdrc-usb2: add npcm750 and npcm845 compatible usb: chipidea: Add support for NPCM .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 4 + drivers/usb/chipidea/Kconfig | 4 + drivers/usb/chipidea/Makefile | 1 + drivers/usb/chipidea/ci_hdrc_npcm.c | 114 ++++++++++++++++++ drivers/usb/chipidea/otg.c | 5 +- include/linux/usb/chipidea.h | 1 + 6 files changed, 128 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/chipidea/ci_hdrc_npcm.c -- 2.33.0
