Hi Conor, On Thu, Sep 28, 2023 at 2:04 PM Conor Dooley <conor@xxxxxxxxxx> wrote: > > On Wed, Sep 27, 2023 at 09:35:11AM -0300, Fabio Estevam wrote: > > From: Fabio Estevam <festevam@xxxxxxx> > > > > On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is > > no mode-switch, only an orientation switch. > > > > Make the 'mode-switch' property a non-required one. > > There seem to be very few compatibles in this file, so I guess > everything uses the generic compatible. I'm not expecting you to know > why it's like this, but should we add a compatible for this particular > mux & only relax the requirement for it specifically? I am not sure. Bjorn, do you have any suggestions, please? > > Signed-off-by: Fabio Estevam <festevam@xxxxxxx> > > --- > > Changes since v2: > > - Newly introduced. > > > > Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 - > > 1 file changed, 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml > > index b61dcf8b4aad..d3b2b666ec2a 100644 > > --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml > > +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml > > @@ -51,7 +51,6 @@ required: > > - compatible > > - enable-gpios > > - select-gpios > > - - mode-switch > > - orientation-switch > > - port > > > > -- > > 2.34.1 > >
