Patch series adds Qualcomm 22ull Super-Speed USB UNIPHY driver support present in Qualcomm IPQ5332 SoC which is required to enable the USB3. This PHY is interfaced with SNPS DWC3 USB and SNPS DWC PCIe. Either one of the interface can use it via the mux selection present in the TCSR register. Current patch series adds the support for UNIPHY with DWC3 USB. Discards the first patch series as adding a new driver. https://lore.kernel.org/all/20230829135818.2219438-1-quic_ipkumar@xxxxxxxxxxx/ Praveenkumar I (8): dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy phy: qcom: Introduce Super-Speed USB UNIPHY driver arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332 arm64: dts: qcom: ipq5332: Add clocks for USB Super-Speed arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node arm64: dts: qcom: ipq5332: Enable USB Super-Speed PHY arm64: defconfig: Enable qcom USB UNIPHY driver .../bindings/phy/qcom,ipq5332-usb-uniphy.yaml | 83 +++++ .../devicetree/bindings/usb/qcom,dwc3.yaml | 20 +- arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 6 + arch/arm64/boot/dts/qcom/ipq5332.dtsi | 40 ++- arch/arm64/configs/defconfig | 1 + drivers/phy/qualcomm/Kconfig | 11 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-uniphy-usb.c | 322 ++++++++++++++++++ 8 files changed, 476 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-usb.c -- 2.34.1