From: Abdel Alkuor <abdelalkuor@xxxxxxxxxx>
When an EEPROM is present, tps25750 loads the binary configuration from
EEPROM. Hence, all we need to do is wait for the device to switch to APP
mode
Signed-off-by: Abdel Alkuor <abdelalkuor@xxxxxxxxxx>
---
Changes in v7:
- Add driver name to commit subject
Changes in v6:
- Update eeprom macro to use TPS instead
Changes in v5:
- Incorporating tps25750 into tps6598x driver
drivers/usb/typec/tipd/core.c | 13 +++++++++++++
drivers/usb/typec/tipd/tps6598x.h | 3 +++
2 files changed, 16 insertions(+)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index f96a9ff07fba..cd22635460d3 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -37,6 +37,7 @@
#define TPS_REG_STATUS 0x1a
#define TPS_REG_SYSTEM_CONF 0x28
#define TPS_REG_CTRL_CONF 0x29
+#define TPS_REG_BOOT_STATUS 0x2D
#define TPS_REG_POWER_STATUS 0x3f
#define TPS_REG_RX_IDENTITY_SOP 0x48
#define TPS_REG_DATA_STATUS 0x5f
@@ -910,6 +911,17 @@ static int tps25750_apply_patch(struct tps6598x *tps)
{
int ret;
unsigned long timeout;
+ u64 status = 0;
+
+ ret = tps6598x_block_read(tps, TPS_REG_BOOT_STATUS, &status, 5);
+ if (ret)
+ return ret;
+ /*
+ * Nothing to be done if the configuration
+ * is being loaded from EERPOM
+ */
+ if (status & TPS_BOOT_STATUS_I2C_EEPROM_PRESENT)
+ goto wait_for_app;
ret = tps25750_start_patch_burst_mode(tps);
if (ret) {
@@ -921,6 +933,7 @@ static int tps25750_apply_patch(struct tps6598x *tps)
if (ret)
return ret;
+wait_for_app:
timeout = jiffies + msecs_to_jiffies(1000);
do {
diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
index 527857549d69..a80d0929f3ee 100644
--- a/drivers/usb/typec/tipd/tps6598x.h
+++ b/drivers/usb/typec/tipd/tps6598x.h
@@ -199,4 +199,7 @@
#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A BIT(2)
#define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B (BIT(2) | BIT(1))
+/* BOOT STATUS REG*/
+#define TPS_BOOT_STATUS_I2C_EEPROM_PRESENT BIT(3)
+
#endif /* __TPS6598X_H__ */
--
2.34.1
