Hello, Small series to convert some of the board files in the mach-pxa directory to use the new GPIO descriptor interface. Most notably, the am200epd, am300epd and Spitz matrix keypad among others are not converted in this series. Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx> --- Changes in v2: - Address maintainer comments: - Change mentions of function to function() - Drop cast in OHCI driver dev_warn() call - Use %pe in OHCI and reset drivers - Use GPIO _optional() API in OHCI driver - Drop unnecessary not-null check in OHCI driver - Use pr_err() instead of printk() in reset driver - Rebase on v6.6-rc3 - Link to v1: https://lore.kernel.org/r/20230924-pxa-gpio-v1-0-2805b87d8894@xxxxxxxx --- Duje Mihanović (6): ARM: pxa: Convert Spitz OHCI to GPIO descriptors ARM: pxa: Convert Spitz LEDs to GPIO descriptors ARM: pxa: Convert Spitz CF power control to GPIO descriptors ARM: pxa: Convert reset driver to GPIO descriptors ARM: pxa: Convert Spitz hsync to GPIO descriptors ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors arch/arm/mach-pxa/gumstix.c | 24 ++++++++------- arch/arm/mach-pxa/reset.c | 39 ++++++++--------------- arch/arm/mach-pxa/reset.h | 3 +- arch/arm/mach-pxa/spitz.c | 70 +++++++++++++++++++++++++++++++++--------- drivers/usb/host/ohci-pxa27x.c | 7 +++++ 5 files changed, 90 insertions(+), 53 deletions(-) --- base-commit: 6465e260f48790807eef06b583b38ca9789b6072 change-id: 20230807-pxa-gpio-3ce25d574814 Best regards, -- Duje Mihanović <duje.mihanovic@xxxxxxxx>