Hi, I've tried several stable kernel versions with an isd200 usb2 cradle, and it seems that the last working kernel version with this device may be 2.6.26.8. I'm not sure if this was related to the separation of the isd200 driver into a separate module, or if it's an ehci_hcd issue, or what the cause is... w/2.6.31.6... ehci_hcd 0000:00:1d.7: port 5 high speed ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT usb 1-5: reset high speed USB device using ehci_hcd and address 5 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 1 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 2 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 3 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 4 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 5 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 6 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 7 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 8 ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 9 Nov 28 23:13:26 speedy last message repeated 2 times ov 28 23:23:46 speedy kernel: sd 5:0:0:0: [sdb] READ CAPACITY failed Nov 28 23:23:46 speedy kernel: sd 5:0:0:0: [sdb] Result: hostbyte=0x05 driverbyte=0x00 Nov 28 23:23:46 speedy kernel: sd 5:0:0:0: [sdb] Sense not available. Nov 28 23:24:17 speedy kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 5 Nov 28 23:10:20 speedy last message repeated 2 times Nov 28 23:11:22 speedy last message repeated 2 times Nov 28 23:11:22 speedy kernel: sd 5:0:0:0: [sdb] Write Protect is off Nov 28 23:11:53 speedy kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 5 Nov 28 23:12:24 speedy kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 5 Nov 28 23:13:26 speedy last message repeated 2 times Nov 28 23:14:28 speedy last message repeated 2 times Nov 28 23:15:30 speedy last message repeated 2 times Nov 28 23:16:32 speedy last message repeated 2 times Nov 28 23:17:34 speedy last message repeated 2 times Nov 28 23:18:36 speedy last message repeated 2 times Nov 28 23:19:38 speedy last message repeated 2 times Nov 28 23:20:40 speedy last message repeated 2 times Nov 28 23:21:42 speedy last message repeated 2 times Nov 28 23:22:44 speedy last message repeated 2 times Nov 28 23:23:46 speedy last message repeated 2 times Nov 28 23:23:46 speedy kernel: sd 5:0:0:0: [sdb] READ CAPACITY failed Nov 28 23:23:46 speedy kernel: sd 5:0:0:0: [sdb] Result: hostbyte=0x05 driverbyte=0x00 Nov 28 23:23:46 speedy kernel: sd 5:0:0:0: [sdb] Sense not available. Nov 28 23:24:17 speedy kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 5 Nov 28 23:24:48 speedy kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 5 Nov 28 23:25:50 speedy last message repeated 2 times Nov 28 23:26:52 speedy last message repeated 2 times ... (similar errors w/2.6.29.6 and another stable kernel in 2.6.30.x, 2.6.30.7, IIRC) vs when it works with 2.6.26.8... Nov 21 15:10:23 speedy kernel: usb 1-5: new high speed USB device using ehci_hcd and address 22 Nov 21 15:10:23 speedy kernel: usb 4-1: new full speed USB device using uhci_hcd and address 8 Nov 21 15:10:23 speedy kernel: usb 4-1: not running at top speed; connect to a high speed hub Nov 21 15:10:23 speedy kernel: usb 4-1: configuration #1 chosen from 1 choice Nov 21 15:10:23 speedy kernel: scsi7 : SCSI emulation for USB Mass Storage devices Nov 21 15:10:23 speedy kernel: usb 4-1: New USB device found, idVendor=0424, idProduct=20cd Nov 21 15:10:23 speedy kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Nov 21 15:10:23 speedy kernel: usb 4-1: Product: ATA 1.1.0.2 Nov 21 15:10:23 speedy kernel: usb 4-1: Manufacturer: SMSC Nov 21 15:10:29 speedy kernel: scsi 7:0:0:0: Direct-Access USB-FS FUJITSU MHT2080A 0.01 PQ: 0 ANSI: 0 Nov 21 15:10:29 speedy kernel: sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) Nov 21 15:10:29 speedy kernel: sd 7:0:0:0: [sdb] Write Protect is off Nov 21 15:10:29 speedy kernel: sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) Nov 21 15:10:29 speedy kernel: sd 7:0:0:0: [sdb] Write Protect is off Nov 21 15:10:29 speedy kernel: sdb: sdb1 sdb2 < sdb5 > Nov 21 15:10:29 speedy kernel: sd 7:0:0:0: [sdb] Attached SCSI disk Nov 21 15:10:29 speedy kernel: sd 7:0:0:0: Attached scsi generic sg2 type 0 Nov 21 15:10:31 speedy hald: mounted /dev/sdb1 on behalf of uid 501 Nov 21 15:10:32 speedy hald: mounted /dev/sdb5 on behalf of uid 501 Nov 21 15:10:54 speedy hald: unmounted /dev/sdb5 from '/media/PHTDTA' on behalf of uid 501 Nov 21 15:10:59 speedy hald: unmounted /dev/sdb1 from '/media/PHTSYS' on behalf of uid 501 Thanks, - Jason -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
