Re: Unitech MS-180 barcode scanner vs. i-Buddy (bug 13411)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 27, 2009 at 04:46:36PM -0500, Anthony DeRobertis wrote:
> [I'm not subscribed; please cc. I previously sent this to linux-input,
> but got no response; perhaps that was the wrong list?]
> 
> I'm being affected by the HID blacklist on USB_DEVICE_ID_TENX_IBUDDY1 as
> described in bug 13411. My barcode scanner is a USB HID device, and
> works completely once I remove that blacklist entry.
> 
> Please let me know if there is anything I can do to help get this bug
> fixed.

It looks like the HID maintainer is the best person to fix this up.

Jiri?



> 
> Below is lsusb -v on the device (with the blacklist entry removed, if
> that matters):
> 
> Bus 001 Device 071: ID 1130:0001 Tenx Technology, Inc. 
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0         8
>   idVendor           0x1130 Tenx Technology, Inc.
>   idProduct          0x0001 
>   bcdDevice            1.00
>   iManufacturer           0 
>   iProduct                2 USB-TMU-V3
>   iSerial                 0 
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           34
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0 
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              100mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass         3 Human Interface Device
>       bInterfaceSubClass      1 Boot Interface Subclass
>       bInterfaceProtocol      1 Keyboard
>       iInterface              0 
>         HID Device Descriptor:
>           bLength                 9
>           bDescriptorType        33
>           bcdHID               1.10
>           bCountryCode            0 Not supported
>           bNumDescriptors         1
>           bDescriptorType        34 Report
>           wDescriptorLength      78
>          Report Descriptors: 
>            ** UNAVAILABLE **
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval              10
> Device Status:     0x0002
>   (Bus Powered)
>   Remote Wakeup Enabled
> 
> -- 
> BOFH excuse #211:
> 
> Lightning strikes.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux