Displayport Alternatemode 2.1 requires cable capabilities such as cable
signalling, cable type, DPAM version which then will be used by mux
driver for displayport configuration. These capabilities can be derived
from the Cable VDO.
Acked-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
---
Changes in v4:
- Removed helper macro changes from this patch as [PATCH 3/5] is added back.
- Added Acked-by tag from Prashant.
Changes in v3:
- Removed use of variable cable_seepd.
- Added helper macro of pd_vdo.h in this patch as cros_ec_typec is the user.
Changes in v2:
- Remvoed feature flag specifice to DP2.1.
- Remvoed seperate function for DP2.1.
- Removed use of EC host coammnd to get cable details.
- TBT cable VDO is used to get cable details.
- Using VDO_CABLE_SPEED macro to get passive cable speed.
drivers/platform/chrome/cros_ec_typec.c | 28 +++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index d0b4d3fc40ed..cca913400b39 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -492,6 +492,8 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec,
{
struct cros_typec_port *port = typec->ports[port_num];
struct typec_displayport_data dp_data;
+ u32 cable_tbt_vdo;
+ u32 cable_dp_vdo;
int ret;
if (typec->pd_ctrl_ver < 2) {
@@ -524,6 +526,32 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec,
port->state.data = &dp_data;
port->state.mode = TYPEC_MODAL_STATE(ffs(pd_ctrl->dp_mode));
+ /* Get cable VDO for cables with DPSID to check DPAM2.1 is supported */
+ cable_dp_vdo = cros_typec_get_cable_vdo(port, USB_TYPEC_DP_SID);
+
+ /**
+ * Get cable VDO for thunderbolt cables and cables with DPSID but does not
+ * support DPAM2.1.
+ */
+ cable_tbt_vdo = cros_typec_get_cable_vdo(port, USB_TYPEC_TBT_SID);
+
+ if (cable_dp_vdo & DP_CAP_DPAM_VERSION) {
+ dp_data.conf |= cable_dp_vdo;
+ } else if (cable_tbt_vdo) {
+ dp_data.conf |= TBT_CABLE_SPEED(cable_tbt_vdo) << DP_CONF_SIGNALLING_SHIFT;
+
+ /* Cable Type */
+ if (cable_tbt_vdo & TBT_CABLE_OPTICAL)
+ dp_data.conf |= DP_CONF_CABLE_TYPE_OPTICAL << DP_CONF_CABLE_TYPE_SHIFT;
+ else if (cable_tbt_vdo & TBT_CABLE_RETIMER)
+ dp_data.conf |= DP_CONF_CABLE_TYPE_RE_TIMER << DP_CONF_CABLE_TYPE_SHIFT;
+ else if (cable_tbt_vdo & TBT_CABLE_ACTIVE_PASSIVE)
+ dp_data.conf |= DP_CONF_CABLE_TYPE_RE_DRIVER << DP_CONF_CABLE_TYPE_SHIFT;
+ } else if (PD_IDH_PTYPE(port->c_identity.id_header) == IDH_PTYPE_PCABLE) {
+ dp_data.conf |= VDO_TYPEC_CABLE_SPEED(port->c_identity.vdo[0]) <<
+ DP_CONF_SIGNALLING_SHIFT;
+ }
+
ret = cros_typec_retimer_set(port->retimer, port->state);
if (!ret)
ret = typec_mux_set(port->mux, &port->state);
--
2.25.1
