Add SS UNIPHY and update controller node for USB3. Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> --- This patch depends on the below series which adds support for USB2 in IPQ5332 https://lore.kernel.org/all/cover.1692699472.git.quic_varada@xxxxxxxxxxx/ arch/arm64/boot/dts/qcom/ipq5332.dtsi | 39 ++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index e6baf694488c..7fbe6c9f4784 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -158,6 +158,27 @@ usbphy0: phy@7b000 { status = "disabled"; }; + ssuniphy0: ssuniphy@4b0000 { + compatible = "qcom,ipq5332-usb-ssphy"; + reg = <0x4b0000 0x800>; + clocks = <&gcc GCC_USB0_PIPE_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE3X1_PHY_AHB_CLK>; + + #clock-cells = <0>; + clock-output-names = "usb_pcie_wrapper_pipe_clk"; + + clock-names = "pipe", + "phy_cfg_ahb", + "phy_ahb"; + + resets = <&gcc GCC_USB0_PHY_BCR>; + reset-names = "por_rst"; + #phy-cells = <0>; + qcom,phy-mux-sel = <&tcsr 0x10540 0x1>; + status = "disabled"; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x721>; @@ -313,30 +334,34 @@ usb: usb@8a00000 { clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SNOC_USB_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; + <&gcc GCC_USB0_MOCK_UTMI_CLK>, + <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_LFPS_CLK>; + clock-names = "core", "iface", "sleep", - "mock_utmi"; + "mock_utmi", + "aux", + "lfps"; resets = <&gcc GCC_USB_BCR>; - qcom,select-utmi-as-pipe-clk; - #address-cells = <1>; #size-cells = <1>; ranges; status = "disabled"; - usb2_0_dwc: usb@8a00000 { + usb3_0_dwc: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x08a00000 0xe000>; clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; clock-names = "ref"; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - phy-names = "usb2-phy"; - phys = <&usbphy0>; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usbphy0>, <&ssuniphy0>; + tx-fifo-resize; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; -- 2.34.1
