[PATCH v2 RESEND 1/2] usb: dwc3: core: configure TX/RX threshold for DWC3_IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.

In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.

Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx>
---
v1 to v2 change:
    Add the properties for TX/RX threshold setting
---
 drivers/usb/dwc3/core.c | 51 +++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h | 13 +++++++++++
 2 files changed, 64 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9c6bf054f15d..1f74a53816c3 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1246,6 +1246,39 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		}
 	}
 
+	if (DWC3_IP_IS(DWC3)) {
+		u8 rx_thr_num = dwc->rx_thr_num_pkt;
+		u8 rx_maxburst = dwc->rx_max_burst;
+		u8 tx_thr_num = dwc->tx_thr_num_pkt;
+		u8 tx_maxburst = dwc->tx_max_burst;
+
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+
 	return 0;
 
 err_power_off_phy:
@@ -1380,6 +1413,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt = 0;
+	u8			rx_max_burst = 0;
+	u8			tx_thr_num_pkt = 0;
+	u8			tx_max_burst = 0;
 	u8			rx_thr_num_pkt_prd = 0;
 	u8			rx_max_burst_prd = 0;
 	u8			tx_thr_num_pkt_prd = 0;
@@ -1442,6 +1479,14 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,usb2-lpm-disable");
 	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
 				"snps,usb2-gadget-lpm-disable");
+	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
+				&rx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,rx-max-burst",
+				&rx_max_burst);
+	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
+				&tx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,tx-max-burst",
+				&tx_max_burst);
 	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
 				&rx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,rx-max-burst-prd",
@@ -1523,6 +1568,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->hird_threshold = hird_threshold;
 
+	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
+	dwc->rx_max_burst = rx_max_burst;
+
+	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
+	dwc->tx_max_burst = tx_max_burst;
+
 	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
 	dwc->rx_max_burst_prd = rx_max_burst_prd;
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a69ac67d89fe..6782ec8bfd64 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -211,6 +211,11 @@
 #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
 #define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
 
+/* Global TX Threshold Configuration Register */
+#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
+#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
+
 /* Global RX Threshold Configuration Register for DWC_usb31 only */
 #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
 #define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
@@ -1045,6 +1050,10 @@ struct dwc3_scratchpad_array {
  * @test_mode_nr: test feature selector
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
+ * @rx_thr_num_pkt: USB receive packet count
+ * @rx_max_burst: max USB receive burst size
+ * @tx_thr_num_pkt: USB transmit packet count
+ * @tx_max_burst: max USB transmit burst size
  * @rx_thr_num_pkt_prd: periodic ESS receive packet count
  * @rx_max_burst_prd: max periodic ESS receive burst size
  * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
@@ -1273,6 +1282,10 @@ struct dwc3 {
 	u8			test_mode_nr;
 	u8			lpm_nyet_threshold;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt;
+	u8			rx_max_burst;
+	u8			tx_thr_num_pkt;
+	u8			tx_max_burst;
 	u8			rx_thr_num_pkt_prd;
 	u8			rx_max_burst_prd;
 	u8			tx_thr_num_pkt_prd;
-- 
2.34.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux