Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/15/2023 10:44 PM, Krzysztof Kozlowski wrote:
On 14/08/2023 20:50, Elson Roy Serrao wrote:
This property allows dwc3 runtime suspend when bus suspend interrupt
is received even with cable connected. This would allow the dwc3
controller to enter low power mode during bus suspend scenario.

This property would particularly benefit dwc3 IPs where hibernation is
not enabled and the dwc3 low power mode entry/exit is handled by the
glue driver. The assumption here is that the platform using this dt
property is capable of detecting resume events to bring the controller
out of suspend.

Signed-off-by: Elson Roy Serrao <quic_eserrao@xxxxxxxxxxx>
---
  Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 5 +++++
  1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index a696f23730d3..e19a60d06d2b 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -403,6 +403,11 @@ properties:
      description:
        Enable USB remote wakeup.
+ snps,runtime-suspend-on-usb-suspend:
+    description:
+      If True then dwc3 runtime suspend is allowed during bus suspend
+      case even with the USB cable connected.

This was no tested... but anyway, this is no a DT property but OS
policy. There is no such thing as "runtime suspend" in the hardware,
because you describe one particular OS.

Sorry, no a DT property, drop the change entirely.


Hi Krzysztof

Sorry my local dt checker had some issue and it did not catch these errors. I have rectified it now.

This dt property is mainly for skipping dwc3 controller halt when a USB suspend interrupt is received with usb cable connected, so that we dont trigger a DISCONNECT event. Perhaps a better name would reflect the true usage of this?

Something like snps,skip-dwc3-halt-on-usb-suspend. dwc3 cores where hibernation feature is not enabled/supported can use this property

Hi Thinh,Roger
Please let me know your opinion on 'snps,skip-dwc3-halt-on-usb-suspend' as the quirk name.

Thanks
Elson



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux