Add support for the gl3510 4 ports USB3.1 hub. This allows to control its
reset pins with a gpio.
No public documentation is available for this hub. Using the same reset
duration as the gl852g which seems OK.
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/usb/misc/onboard_usb_hub.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index aca5f50eb0da..4b94ea375d45 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -22,6 +22,10 @@ static const struct onboard_hub_pdata ti_tusb8041_data = {
.reset_us = 3000,
};
+static const struct onboard_hub_pdata genesys_gl3510_data = {
+ .reset_us = 50,
+};
+
static const struct onboard_hub_pdata genesys_gl850g_data = {
.reset_us = 3,
};
@@ -41,6 +45,7 @@ static const struct of_device_id onboard_hub_match[] = {
{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
+ { .compatible = "usb5e3,626", .data = &genesys_gl3510_data, },
{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
{ .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
{ .compatible = "usbbda,414", .data = &realtek_rts5411_data, },
--
2.40.1
