[PATCH AUTOSEL 5.10 1/3] net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

[ Upstream commit 5e1627cb43ddf1b24b92eb26f8d958a3f5676ccb ]

The syzbot fuzzer identified a problem in the usbnet driver:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
 usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
 __netdev_start_xmit include/linux/netdevice.h:4918 [inline]
 netdev_start_xmit include/linux/netdevice.h:4932 [inline]
 xmit_one net/core/dev.c:3578 [inline]
 dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...

This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.

The fix is simply to add such a check.

Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@xxxxxxxxxxxxxxxxxxxxxxxxx
Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@xxxxxxxxxx/
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
CC: Oliver Neukum <oneukum@xxxxxxxx>
Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/usb/usbnet.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 43d70348343b2..481a41d879b53 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1738,6 +1738,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	} else if (!info->in || !info->out)
 		status = usbnet_get_endpoints (dev, udev);
 	else {
+		u8 ep_addrs[3] = {
+			info->in + USB_DIR_IN, info->out + USB_DIR_OUT, 0
+		};
+
 		dev->in = usb_rcvbulkpipe (xdev, info->in);
 		dev->out = usb_sndbulkpipe (xdev, info->out);
 		if (!(info->flags & FLAG_NO_SETINT))
@@ -1747,6 +1751,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 		else
 			status = 0;
 
+		if (status == 0 && !usb_check_bulk_endpoints(udev, ep_addrs))
+			status = -EINVAL;
 	}
 	if (status >= 0 && dev->status)
 		status = init_status (dev, udev);
-- 
2.40.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux