To enable DisplayPort on the platforms supported by qcom-pmic-typec driver, we need to register a corresponding drm_bridge for this device to be able to receive the OOB hotplug event sent to the corresponding DRM connector. Reception of the hotplug event is implemented by [1], but there is no direct dependency on that patchset. This series implements the remaining parts: registration of the drm_bridge and setting of the proper destination for the OOB hotplug event. [1] https://patchwork.freedesktop.org/series/120393/ Changes since v2: - Reworded commit message for the first patch to explicitly mention that the "displayport" OF property was rejected (Bjorn) - Removed several #ifdefs from the qcom-pmic-typec patch (Bryan, Konrad, Greg K-H) Changes since v1: - Properly handle CONFIG_DRM dependency. Disallow building DRM as a module if qcom-pmic-typec driver is built-in (Bryan). Dmitry Baryshkov (2): usb: typec: altmodes/displayport: add support for embedded DP cases usb: typec: qcom-pmic-typec: register drm_bridge drivers/usb/typec/altmodes/displayport.c | 5 ++- drivers/usb/typec/tcpm/Kconfig | 1 + drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 35 +++++++++++++++++++ 3 files changed, 40 insertions(+), 1 deletion(-) -- 2.39.2
