PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we
could combine the control transfers into one control transfer.
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
drivers/net/usb/r8152.c | 75 ++++++++++++++---------------------------
1 file changed, 25 insertions(+), 50 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f6578a99dbac..db9897e825b4 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3978,29 +3978,10 @@ static void rtl_reset_bmu(struct r8152 *tp)
/* Clear the bp to stop the firmware before loading a new one */
static void rtl_clear_bp(struct r8152 *tp, u16 type)
{
- switch (tp->version) {
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_07:
- break;
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- ocp_write_byte(tp, type, PLA_BP_EN, 0);
- break;
- case RTL_VER_14:
- ocp_write_word(tp, type, USB_BP2_EN, 0);
+ u16 bp[16] = {0};
+ u16 bp_num;
- ocp_write_word(tp, type, USB_BP_8, 0);
- ocp_write_word(tp, type, USB_BP_9, 0);
- ocp_write_word(tp, type, USB_BP_10, 0);
- ocp_write_word(tp, type, USB_BP_11, 0);
- ocp_write_word(tp, type, USB_BP_12, 0);
- ocp_write_word(tp, type, USB_BP_13, 0);
- ocp_write_word(tp, type, USB_BP_14, 0);
- ocp_write_word(tp, type, USB_BP_15, 0);
- break;
+ switch (tp->version) {
case RTL_VER_08:
case RTL_VER_09:
case RTL_VER_10:
@@ -4008,32 +3989,31 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
case RTL_VER_12:
case RTL_VER_13:
case RTL_VER_15:
- default:
if (type == MCU_TYPE_USB) {
ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
- } else {
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+ bp_num = 16;
+ break;
}
+ fallthrough;
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_write_byte(tp, type, PLA_BP_EN, 0);
+ fallthrough;
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ bp_num = 8;
+ break;
+ case RTL_VER_14:
+ default:
+ ocp_write_word(tp, type, USB_BP2_EN, 0);
+ bp_num = 16;
break;
}
- ocp_write_word(tp, type, PLA_BP_0, 0);
- ocp_write_word(tp, type, PLA_BP_1, 0);
- ocp_write_word(tp, type, PLA_BP_2, 0);
- ocp_write_word(tp, type, PLA_BP_3, 0);
- ocp_write_word(tp, type, PLA_BP_4, 0);
- ocp_write_word(tp, type, PLA_BP_5, 0);
- ocp_write_word(tp, type, PLA_BP_6, 0);
- ocp_write_word(tp, type, PLA_BP_7, 0);
+ generic_ocp_write(tp, PLA_BP_0, BYTE_EN_DWORD, bp_num << 1, bp, type);
/* wait 3 ms to make sure the firmware is stopped */
usleep_range(3000, 6000);
@@ -5007,10 +4987,9 @@ static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
{
- u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
+ u16 bp_en_addr, type, fw_ver_reg;
u32 length;
u8 *data;
- int i;
switch (__le32_to_cpu(mac->blk_hdr.type)) {
case RTL_FW_PLA:
@@ -5052,12 +5031,8 @@ static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
__le16_to_cpu(mac->bp_ba_value));
- bp_index = __le16_to_cpu(mac->bp_start);
- bp_num = __le16_to_cpu(mac->bp_num);
- for (i = 0; i < bp_num; i++) {
- ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
- bp_index += 2;
- }
+ generic_ocp_write(tp, __le16_to_cpu(mac->bp_start), BYTE_EN_DWORD,
+ __le16_to_cpu(mac->bp_num) << 1, mac->bp, type);
bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
if (bp_en_addr)
--
2.41.0
