Add a dt-binding to describe the definition of enabling the Q6 USB backend device for audio offloading. The node carries information, which is passed along to the QC USB SND class driver counterpart. These parameters will be utilized during QMI stream enable requests. Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx> --- .../bindings/sound/qcom,q6usb-dais.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml new file mode 100644 index 000000000000..77bc9b4c3c90 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC DPCM USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@xxxxxxxxxxx> + +description: + The USB port is a supported AFE path on the Q6 DSP. This ASoC DPCM + backend DAI driver will communicate the required settings to the QC USB SND + class driver for properly enabling the audio stream. Parameters defined + under this node will carry settings, which will be passed along during + the QMI stream enable request. + +properties: + compatible: + enum: + - qcom,q6usb + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-intr-num: + description: + Desired XHCI interrupter number to use. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - "#sound-dai-cells" + - qcom,usb-audio-intr-num + +additionalProperties: false + +examples: + - | + dais { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-num = <2>; + };
