samsung,s3c6400-hsotg compatible is already fully covered in dwc2.yaml bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../devicetree/bindings/usb/samsung-hsotg.txt | 38 ------------------- 1 file changed, 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/samsung-hsotg.txt diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt deleted file mode 100644 index 0388634598ce..000000000000 --- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt +++ /dev/null @@ -1,38 +0,0 @@ -Samsung High Speed USB OTG controller ------------------------------ - -The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards. -It gives functionality of OTG-compliant USB 2.0 host and device with -support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps) -operation. - -Currently only device mode is supported. - -Binding details ------ - -Required properties: -- compatible: "samsung,s3c6400-hsotg" should be used for all currently - supported SoC, -- interrupts: specifier of interrupt signal of interrupt controller, - according to bindings of interrupt controller, -- clocks: contains an array of clock specifiers: - - first entry: OTG clock -- clock-names: contains array of clock names: - - first entry: must be "otg" -- vusb_d-supply: phandle to voltage regulator of digital section, -- vusb_a-supply: phandle to voltage regulator of analog section. - -Example ------ - - hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; - clocks = <&clock 305>; - clock-names = "otg"; - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - }; - -- 2.34.1