Re: [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's related to multiport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 21, 2023 at 03:05:36PM +0530, Krishna Kurapati PSSNV wrote:
> On 7/21/2023 2:51 PM, Johan Hovold wrote:

> > As I wrote above, I think you should instead add a common helper for
> > setting up all the interrupts for a port. For example, along the lines
> > of:
> > 
> > 	dwc3_setup_port_irq(int index)
> > 	{
> > 		if (index == 0)
> > 			try non-mp name
> > 		else
> > 			generate mp name
> > 
> > 		lookup and request hs irqs
> > 		lookup and request ss irq
> > 		lookup and request power irq
> > 	}
> > 
> > 	dwc3_setup_irq()
> > 	{
> > 		determine if MP (num_ports)
> > 
> > 		for each port
> > 			dwc3_setup_port_irq(port index)
> > 	}
> > The port irq helper can either be told using a second argument that this
> > is a non-mp controller, or you can first try looking up one of the
> > non-mp names.

> I think I did something similar. I prepared a helper to request IRQ in 
> the patch and the main logic would reside in setup_irq where i would try 
> and get IRQ's.

No, you only added a wrapper around request_irq() but no helper to
setup all irqs for a port, so that's not really similar.

> Irrespective of whether we are MP capable or not, how about we read all 
> IRQ's like in the patch attached previously. And the implementation 
> facilitates addition of ACPI to multiport also if required. I am just 
> trying to cover all cases like this by declaring IRQ info in global section.
> 
> static int dwc3_qcom_prep_irq(struct dwc3_qcom *qcom, char *irq_name,
>                                 char *disp_name, int irq)
> {
>         int ret;
> 
>         /* Keep wakeup interrupts disabled until suspend */
>         irq_set_status_flags(irq, IRQ_NOAUTOEN);
>         ret = devm_request_threaded_irq(/* Give inouts here*/);
>         if (ret)
>                dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
> 
>         return ret;
> }
> 
> 
> static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> {
>    for (DP_IRQ[ i = 0-3] {
>       try getting dp_irq_i using MP_IRQ strings
>       if ((ret < 0)  and (i == 0))
> 	try getting dp_irq_i using NON_MP_IRQ strings
> 
>       call prep_irq accordingly.
>    }
> 
>    //Run same loop for DM and SS
> }

So again, the above is not setting up all irqs for a port in one place
which seems like the natural way to add support for multiport.

It should be possible to reuse a per-port setup function also for ACPI.
 
> The second patch was just enabling IRQ's for all ports to support wakeup.
> 
> > My mailer discarded your second patch, but you cannot assume that the
> > devices connected to each port are of the same type (e.g. HS or SS)
> > based on what is connected to the first port.
> > 
> Are you referring to enabling IRQ's for different ports before going to 
> suspend ? Meaning get the speed of enum on each port and accordingly 
> enable IRQ's ?

Exactly. That will be needed.

Johan



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux