On 7/11/2023 2:56 PM, Thinh Nguyen wrote:
On Tue, Jul 11, 2023, Elson Roy Serrao wrote:
This property allows dwc3 runtime suspend when bus suspend interrupt
is received even with cable connected. This would allow the dwc3
controller to enter low power mode during bus suspend scenario.
This property would particularly benefit dwc3 IPs where hibernation is
not enabled and the dwc3 low power mode entry/exit is handled by the
glue driver. The assumption here is that the platform using this dt
property is capable of detecting resume events to bring the controller
out of suspend.
Signed-off-by: Elson Roy Serrao <quic_eserrao@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index a696f23730d3..18ad99a26dd9 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -403,6 +403,11 @@ properties:
description:
Enable USB remote wakeup.
+ snps,allow-rtsusp-on-u3:
Please spell out the whole thing as "rtsusp" isn't clear. Also, it's not
just for U3 right? For highspeed, it's L2.
How about the name that Roger use: "snps,gadget-keep-connect-sys-sleep"
Done. Will make that modification and upload v4
+ description:
+ If True then dwc3 runtime suspend is allowed during bus suspend
+ case even with the USB cable connected.
+
unevaluatedProperties: false
required:
--
2.17.1
Did you Cc Rob, the devicetree maintainer?
My bad. Thanks for pointing this out
