Re: [PATCH 1/3] usb: chipidea: add USB PHY event

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23-06-27 19:03:51, Xu Yang wrote:
> Add USB PHY event for below situation:
> - usb role changed
> - vbus connect
> - vbus disconnect
> - gadget driver is enumerated
> 
> USB PHY driver can get the last event after above situation occurs
> and deal with different situations.
> 
> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>

Acked-by: Peter Chen <peter.chen@xxxxxxxxxx>

Peter
> ---
>  drivers/usb/chipidea/ci.h  | 18 ++++++++++++++++--
>  drivers/usb/chipidea/udc.c | 10 ++++++++++
>  2 files changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
> index f210b7489fd5..d262b9df7b3d 100644
> --- a/drivers/usb/chipidea/ci.h
> +++ b/drivers/usb/chipidea/ci.h
> @@ -281,8 +281,19 @@ static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
>  		return -ENXIO;
>  
>  	ret = ci->roles[role]->start(ci);
> -	if (!ret)
> -		ci->role = role;
> +	if (ret)
> +		return ret;
> +
> +	ci->role = role;
> +
> +	if (ci->usb_phy) {
> +		if (role == CI_ROLE_HOST)
> +			usb_phy_set_event(ci->usb_phy, USB_EVENT_ID);
> +		else
> +			/* in device mode but vbus is invalid*/
> +			usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
> +	}
> +
>  	return ret;
>  }
>  
> @@ -296,6 +307,9 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
>  	ci->role = CI_ROLE_END;
>  
>  	ci->roles[role]->stop(ci);
> +
> +	if (ci->usb_phy)
> +		usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
>  }
>  
>  static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 54c09245ad05..d58355427eeb 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1718,6 +1718,13 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
>  		ret = ci->platdata->notify_event(ci,
>  				CI_HDRC_CONTROLLER_VBUS_EVENT);
>  
> +	if (ci->usb_phy) {
> +		if (is_active)
> +			usb_phy_set_event(ci->usb_phy, USB_EVENT_VBUS);
> +		else
> +			usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
> +	}
> +
>  	if (ci->driver)
>  		ci_hdrc_gadget_connect(_gadget, is_active);
>  
> @@ -2034,6 +2041,9 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
>  		if (USBi_PCI & intr) {
>  			ci->gadget.speed = hw_port_is_high_speed(ci) ?
>  				USB_SPEED_HIGH : USB_SPEED_FULL;
> +			if (ci->usb_phy)
> +				usb_phy_set_event(ci->usb_phy,
> +					USB_EVENT_ENUMERATED);
>  			if (ci->suspended) {
>  				if (ci->driver->resume) {
>  					spin_unlock(&ci->lock);
> -- 
> 2.34.1
> 

-- 

Thanks,
Peter Chen



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux