Re: [PATCH 07/10] arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,

On 7/6/23 11:25, Alexandre TORGUE wrote:
Hi Gatien

On 7/5/23 19:27, Gatien Chevallier wrote:
RIFSC is a firewall controller. Change its compatible so that is matches
the documentation and reference RIFSC as a feature-domain-controller.

Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/st/stm32mp251.dtsi | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 5268a4321841..62101084cab8 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -106,17 +106,20 @@ soc@0 {
          ranges = <0x0 0x0 0x0 0x80000000>;
          rifsc: rifsc-bus@42080000 {
-            compatible = "simple-bus";
+            compatible = "st,stm32mp25-rifsc";

You could keep "simple-bus" compatible (in second position). In case of the RIFSC is not probed, the platform will be able to boot. If you agree you can use the same for ETZPC.

Cheers
Alex

Sure, good point.

I'll change that in V2

Best regards,
Gatien

              reg = <0x42080000 0x1000>;
              #address-cells = <1>;
              #size-cells = <1>;
              ranges;
+            feature-domain-controller;
+            #feature-domain-cells = <1>;
              usart2: serial@400e0000 {
                  compatible = "st,stm32h7-uart";
                  reg = <0x400e0000 0x400>;
                  interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
                  clocks = <&ck_flexgen_08>;
+                feature-domains = <&rifsc 32>;
                  status = "disabled";
              };
          };




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux