> -----Original Message-----
> From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
> Sent: Thursday, June 29, 2023 12:11 AM
> To: Frank Li <frank.li@xxxxxxx>; rogerq@xxxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> Jun Li <jun.li@xxxxxxx>; Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx>; Elson Roy Serrao
> <quic_eserrao@xxxxxxxxxxx>; Thinh Nguyen
> <Thinh.Nguyen@xxxxxxxxxxxx>; Andy Shevchenko
> <andriy.shevchenko@xxxxxxxxxxxxxxx>; Jó Ágila Bitsch <jgilab@xxxxxxxxx>;
> Prashanth K <quic_prashk@xxxxxxxxxxx>; Peter Chen
> <peter.chen@xxxxxxxxxx>; open list:USB SUBSYSTEM <linux-
> usb@xxxxxxxxxxxxxxx>; open list <linux-kernel@xxxxxxxxxxxxxxx>
> Subject: [EXT] Re: [PATCH 1/1] usb: gadget: call usb_gadget_check_config()
> to verify UDC capability
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 6/29/23 3:54 AM, Frank Li wrote:
> > The legacy gadget driver omitted calling usb_gadget_check_config()
> > to ensure that the USB device controller (UDC) has adequate resources,
> > including sufficient endpoint numbers and types, to support the given
> > configuration.
> >
> > Previously, usb_add_config() was solely invoked by the legacy gadget
> > driver. Adds the necessary usb_gadget_check_config() after the bind()
> > operation to fix the issue.
> >
> > Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to
> composite EP number")
> > Reported-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > drivers/usb/gadget/composite.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/usb/gadget/composite.c
> b/drivers/usb/gadget/composite.c
> > index 1b3489149e5e..dd9b90481b4c 100644
> > --- a/drivers/usb/gadget/composite.c
> > +++ b/drivers/usb/gadget/composite.c
> > @@ -1125,6 +1125,10 @@ int usb_add_config(struct usb_composite_dev
> *cdev,
> > goto done;
> >
> > status = bind(config);
> > +
> > + if (status == 0)
> > + status = usb_gadget_check_config(cdev->gadget);
>
> This will work for legacy gadgets that support only one configurations.
> Take for example g_ether. It has two configurations when RNDIS is enabled.
> And usb_add_config() is invoked for each configuration.
>
> cdns3_gadget_check_config() calculates the total IN end-points based on the
> ep->claimed flag.
>
> list_for_each_entry(ep, &gadget->ep_list, ep_list) {
> if (ep->claimed && (ep->address & USB_DIR_IN))
> n_in++;
> }
>
> This ep->claimed flag is later cleared by usb_ep_autoconfig_reset() which is
> invoked in usb_add_config(). So for multi-configurations, actual total in end
> points
> is not taken into consideration thus resulting in incorrect fifo size
> allocation/check.
>
> g_ffs is another gadget which has multiple configurations.
Actually it is another problem that I am trying to figure out. Configfs should have
similar Problem. We never test multi config case in configfs also. Generally,
composite device only have multi interfaces.
cdns3_gadget_match_ep wrong cache all endpoints for all configs, but actually
only one config can be active.
Frank
>
>
> > +
> > if (status < 0) {
> > while (!list_empty(&config->functions)) {
> > struct usb_function *f;
>
> --
> Regards,
> Ravi
