On Wed, Jun 28, 2023 at 05:55:02PM +0800, Jerry Meng wrote: > EM060K_128 is EM060K's sub-model, having the same nmae "EM060K-GL" > > MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL > > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=2c7c ProdID=0128 Rev= 5.04 > S: Manufacturer=Quectel > S: Product=Quectel EM060K-GL > S: SerialNumber=f6fa08b6 > C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA > A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 > I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms > I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms > I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option > E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) > E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) > E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Why is this, and the subject line, indented? No need for that, right? thanks, greg k-h
