Convert the PM8916 analog WCD codec bindings to YAML.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
.../bindings/sound/qcom,msm8916-wcd-analog.txt | 101 -------------
.../sound/qcom,pm8916-wcd-analog-codec.yaml | 160 +++++++++++++++++++++
2 files changed, 160 insertions(+), 101 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
deleted file mode 100644
index e7d17dda55db..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-msm8916 analog audio CODEC
-
-Bindings for codec Analog IP which is integrated in pmic pm8916,
-
-## Bindings for codec core on pmic:
-
-Required properties
- - compatible = "qcom,pm8916-wcd-analog-codec";
- - reg: represents the slave base address provided to the peripheral.
- - interrupts: List of interrupts in given SPMI peripheral.
- - interrupt-names: Names specified to above list of interrupts in same
- order. List of supported interrupt names are:
- "cdc_spk_cnp_int" - Speaker click and pop interrupt.
- "cdc_spk_clip_int" - Speaker clip interrupt.
- "cdc_spk_ocp_int" - Speaker over current protect interrupt.
- "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
- "mbhc_but_rel_det" - button release interrupt.
- "mbhc_but_press_det" - button press event
- "mbhc_ins_rem_det" - jack insert removal detect interrupt.
- "mbhc_switch_int" - multi button headset interrupt.
- "cdc_ear_ocp_int" - Earphone over current protect interrupt.
- "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
- "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
- "cdc_ear_cnp_int" - earphone cnp interrupt.
- "cdc_hphr_cnp_int" - hphr click and pop interrupt.
- "cdc_hphl_cnp_int" - hphl click and pop interrupt.
-
- - clocks: Handle to mclk.
- - clock-names: should be "mclk"
- - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
- - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
- - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
-
-Optional Properties:
- - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons
- detection on headset when the mbhc is powered up
- by internal current source, this is a low power.
- - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons
- detection on headset when mbhc is powered up
- from micbias.
-- qcom,micbias-lvl: Voltage (mV) for Mic Bias
-- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a
- NO (Normally Open). If not specified, then
- its assumed that hphl pin on jack is NC
- (Normally Closed).
-- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is
- NO (Normally Open). If not specified, then
- its assumed that gnd pin on jack is NC
- (Normally Closed).
-- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
- connected.
-- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
- connected.
-
-Example:
-
-spmi_bus {
- ...
- audio-codec@f000{
- compatible = "qcom,pm8916-wcd-analog-codec";
- reg = <0xf000 0x200>;
- reg-names = "pmic-codec-core";
- clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
- clock-names = "mclk";
- qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
- qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
- interrupt-parent = <&spmi_bus>;
- interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
- interrupt-names = "cdc_spk_cnp_int",
- "cdc_spk_clip_int",
- "cdc_spk_ocp_int",
- "mbhc_ins_rem_det1",
- "mbhc_but_rel_det",
- "mbhc_but_press_det",
- "mbhc_ins_rem_det",
- "mbhc_switch_int",
- "cdc_ear_ocp_int",
- "cdc_hphr_ocp_int",
- "cdc_hphl_ocp_det",
- "cdc_ear_cnp_int",
- "cdc_hphr_cnp_int",
- "cdc_hphl_cnp_int";
- vdd-cdc-io-supply = <&pm8916_l5>;
- vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
- vdd-micbias-supply = <&pm8916_l13>;
- #sound-dai-cells = <1>;
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml
new file mode 100644
index 000000000000..c385028c4296
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8916 WCD Analog Audio Codec
+
+maintainers:
+ - Konrad Dybcio <konradybcio@xxxxxxxxxx>
+
+description:
+ The analog WCD audio codec found on Qualcomm PM8916 PMIC.
+
+properties:
+ compatible:
+ const: qcom,pm8916-wcd-analog-codec
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: pmic-codec-core
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: mclk
+
+ interrupts:
+ maxItems: 14
+
+ interrupt-names:
+ items:
+ - const: cdc_spk_cnp_int
+ - const: cdc_spk_clip_int
+ - const: cdc_spk_ocp_int
+ - const: mbhc_ins_rem_det1
+ - const: mbhc_but_rel_det
+ - const: mbhc_but_press_det
+ - const: mbhc_ins_rem_det
+ - const: mbhc_switch_int
+ - const: cdc_ear_ocp_int
+ - const: cdc_hphr_ocp_int
+ - const: cdc_hphl_ocp_det
+ - const: cdc_ear_cnp_int
+ - const: cdc_hphr_cnp_int
+ - const: cdc_hphl_cnp_int
+
+ vdd-cdc-io-supply:
+ description: 1.8V buck supply
+
+ vdd-cdc-tx-rx-cx-supply:
+ description: 1.8V SIDO buck supply
+
+ vdd-micbias-supply:
+ description: micbias supply
+
+ qcom,mbhc-vthreshold-low:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Array of 5 threshold voltages in mV for 5-button detection on
+ headset when MBHC is powered by an internal current source.
+ minItems: 5
+ maxItems: 5
+
+ qcom,mbhc-vthreshold-high:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Array of 5 threshold voltages in mV for 5-button detection on
+ headset when MBHC is powered from micbias.
+ minItems: 5
+ maxItems: 5
+
+ qcom,micbias-lvl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Voltage (mV) for Mic Bias
+
+ qcom,hphl-jack-type-normally-open:
+ type: boolean
+ description:
+ True if the HPHL pin on the jack is NO (Normally Open), false if it's
+ NC (Normally Closed).
+
+ qcom,gnd-jack-type-normally-open:
+ type: boolean
+ description:
+ True if the GND pin on the jack is NO (Normally Open), false if it's
+ NC (Normally Closed).
+
+ qcom,micbias1-ext-cap:
+ type: boolean
+ description:
+ True if micbias1 has an external capacitor.
+
+ qcom,micbias2-ext-cap:
+ type: boolean
+ description:
+ True if micbias2 has an external capacitor.
+
+ "#sound-dai-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ audio-codec@f000{
+ compatible = "qcom,pm8916-wcd-analog-codec";
+ reg = <0xf000 0x200>;
+ reg-names = "pmic-codec-core";
+ clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "mclk";
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ interrupt-parent = <&spmi_bus>;
+ interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+ interrupt-names = "cdc_spk_cnp_int",
+ "cdc_spk_clip_int",
+ "cdc_spk_ocp_int",
+ "mbhc_ins_rem_det1",
+ "mbhc_but_rel_det",
+ "mbhc_but_press_det",
+ "mbhc_ins_rem_det",
+ "mbhc_switch_int",
+ "cdc_ear_ocp_int",
+ "cdc_hphr_ocp_int",
+ "cdc_hphl_ocp_det",
+ "cdc_ear_cnp_int",
+ "cdc_hphr_cnp_int",
+ "cdc_hphl_cnp_int";
+ vdd-cdc-io-supply = <&pm8916_l5>;
+ vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+ vdd-micbias-supply = <&pm8916_l13>;
+ #sound-dai-cells = <1>;
+ };
--
2.41.0
