Hi Krishna,
On Wed, Jun 07, 2023 at 02:16:37PM +0200, Johan Hovold wrote:
> On Sun, May 14, 2023 at 11:19:14AM +0530, Krishna Kurapati wrote:
> > static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
> > {
> > u32 reg;
> > @@ -413,13 +423,16 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> > {
> > u32 val;
> > int i, ret;
> > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> >
> > if (qcom->is_suspended)
> > return 0;
> >
> > - val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
> > - if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> > - dev_err(qcom->dev, "HS-PHY not in L2\n");
> > + for (i = 0; i < dwc->num_usb2_ports; i++) {
> > + val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
> > + if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> > + dev_err(qcom->dev, "HS-PHY%d not in L2\n", i);
> > + }
> When testing this on the X13s I get:
>
> dwc3-qcom a4f8800.usb: HS-PHY2 not in L2
>
> for the third port, whose status registers always seems to return zero
> (e.g. as if we're checking the wrong register?):
>
> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 0, pwr_event_stat = 38103c
> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 1, pwr_event_stat = 38103c
> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 2, pwr_event_stat = 00
> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 3, pwr_event_stat = 140030
>
> I verified that everything appears to work as expected on sa8295p-adp.
>
> Do you have any idea of what may be causing this?
You never replied to this; do you have any idea why the status register
for the second port seemingly always read back as 0 on the X13s?
Johan
