Re: [PATCH v3 20/28] ASoC: dt-bindings: Add Q6USB backend bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 3/10/2023 12:54 AM, Krzysztof Kozlowski wrote:
On 09/03/2023 00:57, Wesley Cheng wrote:
Add a dt-binding to describe the definition of enabling the Q6 USB backend
device for audio offloading.  The node carries information, which is passed
along to the QC USB SND class driver counterpart.  These parameters will be
utilized during QMI stream enable requests.

Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
  .../bindings/sound/qcom,q6usb-dais.yaml       | 49 +++++++++++++++++++
  1 file changed, 49 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml
new file mode 100644
index 000000000000..8477abc511dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ASoC USB backend DAI
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
+
+description:
+  The Q6USB backend is a supported AFE port on the Q6DSP. This backend
+  driver will communicate the required settings to the QC USB SND class

What does the "driver" mean? Linux driver? Then drop and focus on
hardware/Q6DSP.


Sorry for the late reply, was side tracked on some other priorities, and reviving this series again.

The driver here is a Linux ASoC based DPCM backend driver, which will interface with the CPU dai (q6afe).

+  driver for properly enabling the audio stream.  Parameters defined
+  under this node will carry settings, which will be passed along during
+  the QMI stream enable request.
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6usb-dais

Can q6usb mean anything else? Why "-dais" suffix?


As of now, no...will remove the dai suffix.

+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  qcom,usb-audio-intr-num:
+    description:
+      Desired XHCI interrupter number to use.
+    $ref: /schemas/types.yaml#/definitions/uint32

Why this should be configurable per board or SoC? It's the first use in
DT and in the same time sounds generic...


Would depend on which interrupter we want to use. This should be configurable per platform in case the audio DSP decides to work off a specific interrupter.

Thanks
Wesley Cheng

+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - qcom,usb-audio-intr-num
+
+additionalProperties: false
+
+examples:
+  - |
+    dais {
+      compatible = "qcom,q6usb-dais";
+      #sound-dai-cells = <1>;
+      iommus = <&apps_smmu 0x180f 0x0>;
+      qcom,usb-audio-intr-num = <2>;
+    };

Best regards,
Krzysztof




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux