RE: [EXT] Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



++ Vinod Koul

> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: Tuesday, June 20, 2023 11:29 PM
> To: Xu Yang <xu.yang_2@xxxxxxx>
> Cc: krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; linux-phy@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; Jun Li <jun.li@xxxxxxx>
> Subject: [EXT] Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
>
> Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the
> message using the 'Report this email' button
>
>
> On Tue, Jun 13, 2023 at 04:34:44PM +0800, Xu Yang wrote:
> > Convert the binding to DT schema format. Besides, this also add clocks,
> > '#phy-cells', phy-3p0-supply and power-domains properties which are not
> > contained in txt file due to txt file lack updates.
> >
> > Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> >
> > ---
> > Changes in v2:
> >  - change filename to fsl,mxs-usbphy.yaml
> >  - add other optional properties
> >  - narrow fsl,anatop to imx6
> >  - use additionalProperties
> > Changes in v3:
> >  - fix indentation
> >  - add clocks property to example
> > Changes in v4:
> >  - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
> >  - limit item of reg and interrupts to 1
> >  - sort enum items
> >  - modify commit message
> > ---
> >  .../bindings/phy/fsl,mxs-usbphy.yaml          | 125 ++++++++++++++++++
> >  .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
> >  2 files changed, 125 insertions(+), 33 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
>
> This should be applied by the PHY maintainers, but they weren't Cc'ed.

I see. Thanks for reminding.

Hi Vinod,

Could you please help to apply below two patches:
    - [v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
    - [v4,2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
The review process has been completed.
Many thanks in advance.

Thanks,
Xu Yang

>
> >
> > diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > new file mode 100644
> > index 000000000000..cc9f2bc7e6fb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > @@ -0,0 +1,125 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id:
> http://devicetree.org/schemas/phy/fsl,mxs-
> usbphy.yaml%23&data=05%7C01%7Cxu.yang_2%40nxp.com%7Cac9c63d6d88543a24a8308db71a32171%7C686ea1d3bc2b4c
> 6fa92cd99c5c301635%7C0%7C0%7C638228717681736316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjo
> iV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HB6IkZX%2BRcbpGNmFCYWOfPYYffoH5QPreo8
> A6jHjRz0%3D&reserved=0
> > +$schema: http://devicetree.org/meta-
> schemas%2Fcore.yaml%23&data=05%7C01%7Cxu.yang_2%40nxp.com%7Cac9c63d6d88543a24a8308db71a32171%7C686ea1
> d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638228717681736316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMD
> AiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=XZ8gZnd%2FCse%2FCFgFKyKganKz7cs
> Vyq6hdIJpRY4p8Fc%3D&reserved=0
> > +
> > +title: Freescale MXS USB Phy Device
> > +
> > +maintainers:
> > +  - Xu Yang <xu.yang_2@xxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - enum:
> > +          - fsl,imx23-usbphy
> > +          - fsl,imx7ulp-usbphy
> > +          - fsl,vf610-usbphy
> > +      - items:
> > +          - enum:
> > +              - fsl,imx28-usbphy
> > +              - fsl,imx6ul-usbphy
> > +              - fsl,imx6sl-usbphy
> > +              - fsl,imx6sx-usbphy
> > +              - fsl,imx6q-usbphy
> > +          - const: fsl,imx23-usbphy
> > +      - items:
> > +          - const: fsl,imx6sll-usbphy
> > +          - const: fsl,imx6ul-usbphy
> > +          - const: fsl,imx23-usbphy
> > +      - items:
> > +          - const: fsl,imx8dxl-usbphy
> > +          - const: fsl,imx7ulp-usbphy
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  '#phy-cells':
> > +    const: 0
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  fsl,anatop:
> > +    description:
> > +      phandle for anatop register, it is only for imx6 SoC series.
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  phy-3p0-supply:
> > +    description:
> > +      One of USB PHY's power supply. Can be used to keep a good signal
> > +      quality.
> > +
> > +  fsl,tx-cal-45-dn-ohms:
> > +    description:
> > +      Resistance (in ohms) of switchable high-speed trimming resistor
> > +      connected in parallel with the 45 ohm resistor that terminates
> > +      the DN output signal.
> > +    minimum: 35
> > +    maximum: 54
> > +    default: 45
> > +
> > +  fsl,tx-cal-45-dp-ohms:
> > +    description:
> > +      Resistance (in ohms) of switchable high-speed trimming resistor
> > +      connected in parallel with the 45 ohm resistor that terminates
> > +      the DP output signal.
> > +    minimum: 35
> > +    maximum: 54
> > +    default: 45
> > +
> > +  fsl,tx-d-cal:
> > +    description:
> > +      Current trimming value (as a percentage) of the 17.78 mA TX
> > +      reference current.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    minimum: 79
> > +    maximum: 119
> > +    default: 100
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          oneOf:
> > +            - enum:
> > +                - fsl,imx6q-usbphy
> > +                - fsl,imx6sl-usbphy
> > +                - fsl,imx6sx-usbphy
> > +                - fsl,imx6sll-usbphy
> > +                - fsl,vf610-usbphy
> > +            - items:
> > +                - const: fsl,imx6ul-usbphy
> > +                - const: fsl,imx23-usbphy
> > +    then:
> > +      required:
> > +        - fsl,anatop
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/imx6qdl-clock.h>
> > +
> > +    usbphy1: usb-phy@20c9000 {
> > +        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> > +        reg = <0x020c9000 0x1000>;
> > +        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
> > +        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> > +        fsl,anatop = <&anatop>;
> > +    };
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-
> usb-phy.txt
> > deleted file mode 100644
> > index 70c813b0755f..000000000000
> > --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> > +++ /dev/null
> > @@ -1,33 +0,0 @@
> > -* Freescale MXS USB Phy Device
> > -
> > -Required properties:
> > -- compatible: should contain:
> > -     * "fsl,imx23-usbphy" for imx23 and imx28
> > -     * "fsl,imx6q-usbphy" for imx6dq and imx6dl
> > -     * "fsl,imx6sl-usbphy" for imx6sl
> > -     * "fsl,vf610-usbphy" for Vybrid vf610
> > -     * "fsl,imx6sx-usbphy" for imx6sx
> > -     * "fsl,imx7ulp-usbphy" for imx7ulp
> > -     * "fsl,imx8dxl-usbphy" for imx8dxl
> > -  "fsl,imx23-usbphy" is still a fallback for other strings
> > -- reg: Should contain registers location and length
> > -- interrupts: Should contain phy interrupt
> > -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
> > -
> > -Optional properties:
> > -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> > -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> > -  that terminates the DN output signal. Default: 45
> > -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> > -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> > -  that terminates the DP output signal. Default: 45
> > -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
> > -  the 17.78mA TX reference current. Default: 100
> > -
> > -Example:
> > -usbphy1: usb-phy@20c9000 {
> > -     compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> > -     reg = <0x020c9000 0x1000>;
> > -     interrupts = <0 44 0x04>;
> > -     fsl,anatop = <&anatop>;
> > -};
> > --
> > 2.34.1
> >




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux