Hi Krzysztof, > > +properties: > > + compatible: > > + items: > > + - enum: > > + - realtek,rtd1295-usb3phy > > + - realtek,rtd1319-usb3phy > > + - realtek,rtd1319d-usb3phy > > + - realtek,rtd1619-usb3phy > > + - realtek,rtd1619b-usb3phy > > + - const: realtek,usb3phy > > Drop last compatible, it is not used now. Does not make sense. Okay. I will remove it. > > + > > + reg: > > + description: PHY data registers > > Drop description, it's obvious. Okay. > > + maxItems: 1 > > + > > + "#phy-cells": > > + const: 0 > > + > > + nvmem-cells: > > + maxItems: 1 > > + description: A phandle to the tx lfps swing trim data provided by > > + a nvmem device, if unspecified, default values shall be used. > > + > > + nvmem-cell-names: > > + items: > > + - const: usb_u3_tx_lfps_swing_trim > > + > > + realtek,amplitude-control-coarse-tuning: > > + description: > > + This adjusts the signal amplitude for normal operation and beacon > LFPS. > > + This value is a parameter for coarse tuning. > > + For different boards, if the default value is inappropriate, this > > + property can be assigned to adjust. > > default: I will add it. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 > > + maximum: 255 > > + > > + realtek,amplitude-control-fine-tuning: > > + description: > > + This adjusts the signal amplitude for normal operation and beacon > LFPS. > > + This value is used for fine-tuning parameters. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > default: I will add it. > > + minimum: 0 > > + maximum: 65535 > > + > Thanks, Stanley
