In order to handle the Audio Accessory mode, refactor the mux
and switch setup in a single function.
The refactor will help add new states and make the process
simpler to understand.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
drivers/usb/typec/mux/fsa4480.c | 111 +++++++++++++++++++++++++++-------------
1 file changed, 75 insertions(+), 36 deletions(-)
diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
index d6495e533e58..b2913594a58f 100644
--- a/drivers/usb/typec/mux/fsa4480.c
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -46,8 +46,11 @@ struct fsa4480 {
struct regmap *regmap;
+ enum typec_orientation orientation;
+ unsigned long mode;
+ unsigned int svid;
+
u8 cur_enable;
- u8 cur_select;
};
static const struct regmap_config fsa4480_regmap_config = {
@@ -58,19 +61,42 @@ static const struct regmap_config fsa4480_regmap_config = {
.disable_locking = true,
};
-static int fsa4480_switch_set(struct typec_switch_dev *sw,
- enum typec_orientation orientation)
+static int fsa4480_set(struct fsa4480 *fsa)
{
- struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
- u8 new_sel;
-
- mutex_lock(&fsa->lock);
- new_sel = FSA4480_SEL_USB;
- if (orientation == TYPEC_ORIENTATION_REVERSE)
- new_sel |= FSA4480_SEL_SBU_REVERSE;
-
- if (new_sel == fsa->cur_select)
- goto out_unlock;
+ bool reverse = (fsa->orientation == TYPEC_ORIENTATION_REVERSE);
+ u8 enable = FSA4480_ENABLE_DEVICE;
+ u8 sel = 0;
+
+ /* USB Mode */
+ if (fsa->mode < TYPEC_STATE_MODAL ||
+ (!fsa->svid && (fsa->mode == TYPEC_MODE_USB2 ||
+ fsa->mode == TYPEC_MODE_USB3))) {
+ enable |= FSA4480_ENABLE_USB;
+ sel = FSA4480_SEL_USB;
+ } else if (fsa->svid) {
+ switch (fsa->mode) {
+ /* DP Only */
+ case TYPEC_DP_STATE_C:
+ case TYPEC_DP_STATE_E:
+ enable |= FSA4480_ENABLE_SBU;
+ if (reverse)
+ sel = FSA4480_SEL_SBU_REVERSE;
+ break;
+
+ /* DP + USB */
+ case TYPEC_DP_STATE_D:
+ case TYPEC_DP_STATE_F:
+ enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_SBU;
+ sel = FSA4480_SEL_USB;
+ if (reverse)
+ sel |= FSA4480_SEL_SBU_REVERSE;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ } else
+ return -EOPNOTSUPP;
if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
/* Disable SBU output while re-configuring the switch */
@@ -81,48 +107,59 @@ static int fsa4480_switch_set(struct typec_switch_dev *sw,
usleep_range(35, 1000);
}
- regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel);
- fsa->cur_select = new_sel;
-
- if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
- regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+ regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, sel);
+ regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, enable);
+ if (enable & FSA4480_ENABLE_SBU) {
/* 15us to allow the SBU switch to turn on again */
usleep_range(15, 1000);
}
-out_unlock:
- mutex_unlock(&fsa->lock);
+ fsa->cur_enable = enable;
return 0;
}
+static int fsa4480_switch_set(struct typec_switch_dev *sw,
+ enum typec_orientation orientation)
+{
+ struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
+ int ret = 0;
+
+ mutex_lock(&fsa->lock);
+
+ if (fsa->orientation != orientation) {
+ fsa->orientation = orientation;
+
+ ret = fsa4480_set(fsa);
+ }
+
+ mutex_unlock(&fsa->lock);
+
+ return ret;
+}
+
static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
{
struct fsa4480 *fsa = typec_mux_get_drvdata(mux);
- u8 new_enable;
+ int ret = 0;
mutex_lock(&fsa->lock);
- new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
- if (state->mode >= TYPEC_DP_STATE_A)
- new_enable |= FSA4480_ENABLE_SBU;
+ if (fsa->mode != state->mode) {
+ fsa->mode = state->mode;
- if (new_enable == fsa->cur_enable)
- goto out_unlock;
+ if (state->alt)
+ fsa->svid = state->alt->svid;
+ else
+ fsa->svid = 0; // No SVID
- regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable);
- fsa->cur_enable = new_enable;
-
- if (new_enable & FSA4480_ENABLE_SBU) {
- /* 15us to allow the SBU switch to turn off */
- usleep_range(15, 1000);
+ ret = fsa4480_set(fsa);
}
-out_unlock:
mutex_unlock(&fsa->lock);
- return 0;
+ return ret;
}
static int fsa4480_probe(struct i2c_client *client)
@@ -143,8 +180,10 @@ static int fsa4480_probe(struct i2c_client *client)
if (IS_ERR(fsa->regmap))
return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
+ /* Safe mode */
fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
- fsa->cur_select = FSA4480_SEL_USB;
+ fsa->mode = TYPEC_STATE_SAFE;
+ fsa->orientation = TYPEC_ORIENTATION_NONE;
/* set default settings */
regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00);
@@ -156,7 +195,7 @@ static int fsa4480_probe(struct i2c_client *client)
regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00);
regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00);
regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09);
- regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select);
+ regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, FSA4480_SEL_USB);
regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
sw_desc.drvdata = fsa;
--
2.34.1
