[PATCH V3] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the binding to DT schema format. It also updates the
reset-controller description.

Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxx>
---
Changes in V2:
- Addressed the Krzysztof review comment:
 - Update DT binding to fix the dt_binding_check warning.
 - Removed 2/2 - xlnx,zynqmp-firmware.yaml binding patch: Will send after
   xlnx,zynqmp-reset.yaml binding merge.

Link: https://lore.kernel.org/lkml/168612336438.2153757.6000360498539992409.robh@xxxxxxxxxx/T/#m4abfe6287177d5fd09f781d298dd19d56aae5e27

Changes in V3:
- Addressed the Krzysztof review comment:
 - Removed 2/2 - xlnx,zynqmp-firmware.yaml binding patch: Will send after
   xlnx,zynqmp-reset.yaml binding merge.
 - Update title: Removed "binding".
 - Update Example:
  - Removed header file.
  - Dropped three levels of indentations: firmware and zynqmp_firmware.
  - Removed the sata example.

Link: https://lore.kernel.org/all/22e3c25e-487b-c02f-46f3-6d2ab2be8813@xxxxxxxxxx/
---
 .../bindings/reset/xlnx,zynqmp-reset.txt      | 55 -------------------
 .../bindings/reset/xlnx,zynqmp-reset.yaml     | 52 ++++++++++++++++++
 2 files changed, 52 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
 create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml

diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
deleted file mode 100644
index ed836868dbf1..000000000000
--- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
+++ /dev/null
@@ -1,55 +0,0 @@
---------------------------------------------------------------------------
- =  Zynq UltraScale+ MPSoC and Versal reset driver binding =
---------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC and Versal has several different resets.
-
-See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
-about zynqmp resets.
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required Properties:
-- compatible:	"xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
-		"xlnx,versal-reset" for Versal platform
-- #reset-cells:	Specifies the number of cells needed to encode reset
-		line, should be 1
-
--------
-Example
--------
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		zynqmp_reset: reset-controller {
-			compatible = "xlnx,zynqmp-reset";
-			#reset-cells = <1>;
-		};
-	};
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For list of all valid reset indices for Zynq UltraScale+ MPSoC see
-<dt-bindings/reset/xlnx-zynqmp-resets.h>
-For list of all valid reset indices for Versal see
-<dt-bindings/reset/xlnx-versal-resets.h>
-
-Example:
-
-serdes: zynqmp_phy@fd400000 {
-	...
-
-	resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	reset-names = "sata_rst";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
new file mode 100644
index 000000000000..0d50f6a54af3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC and Versal reset
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xxxxxxx>
+
+description: |
+  The Zynq UltraScale+ MPSoC and Versal has several different resets.
+
+  The PS reset subsystem is responsible for handling the external reset
+  input to the device and that all internal reset requirements are met
+  for the system (as a whole) and for the functional units.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage. Device nodes that need access to reset
+  lines should specify them as a reset phandle in their corresponding
+  node as specified in reset.txt.
+
+  For list of all valid reset indices for Zynq UltraScale+ MPSoC
+  <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+  For list of all valid reset indices for Versal
+  <dt-bindings/reset/xlnx-versal-resets.h>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-reset
+      - xlnx,versal-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp_reset: reset-controller {
+        compatible = "xlnx,zynqmp-reset";
+        #reset-cells = <1>;
+    };
+
+...
-- 
2.25.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux