Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/06/2023 10:13, Krzysztof Kozlowski wrote:
On 13/06/2023 09:55, Neil Armstrong wrote:
On some platforms, the Type-C plug orientation is given on a GPIO line.

Document this optional Type-C connector property, and take the
assumption an active level represents an inverted/flipped orientation.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Rob had here objections as these are bindings for the connector, not
PMIC glink/altmode. I still doubt that Qualcomm USB Type-C connectors
have such pin exposed. If you open the schematics, the GPIO is actually
coming out from PMIC and is nowhere around the connector. Please drop my
Ack.

This however could be a pin of the PMIC because it clearly is on the
schematics.

Yes it comes from the PMIC, but this part of the PMIC is handled by
the PMIC_GLINK firmware service, so the logical place would be into
the pmic_glink node with a gpio array in order to handle multi-ports.

Thanks,
Neil




Best regards,
Krzysztof





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux