This patch series adds the relevant phy and controller configurations for enabling USB on IPQ9754 Portions of the patchset have been merged. Please see https://lore.kernel.org/lkml/ZGN9gchu7dRb6QwC@matsya/ [v12]: - In dtsi usb@8a00000 -> usb@8af8800 [v11]: - Rename dwc_0 -> usb_0_dwc3 - Minor change in qcom,sc8280xp-qmp-usb3-uni-phy.yaml to factor in latest updates to the file [v10]: - Fix regulator definitions - Address couple of other comments [v9]: - Update bindings to make power-domains as optional since IPQ9574 doesn't have GDSCs [v8]: - Update bindings for the clock name change [v7]: - com_aux -> cfg_ahb in patch 7 [v6]: - Incorporated review comments - Resolve make dtbs_check messages - Fixed pcs_usb offset - Board dts file name changed [v5]: - Incorporated review comments - 'make dtbs_check' giving the following messages since ipq9574 doesn't have power domains. Hope this is ok /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml - Move qmp phy DT node to newer specification [v4]: - Incorporated review comments - Address all 'make dtbs_check' errors [v3]: - Incorporated review comments regarding coding style [v2]: - Incorporated review comments regarding coding style, maintaining sorted order of entries and unused phy register offsets - Removed NOC clock entries from DT node (will be implemented later with interconnect support) - Fixed 'make dtbs_check' errors/warnings [v1]: https://lore.kernel.org/linux-arm-msm/5dac3aa4-8dc7-f9eb-5cf3-b361efdc9494@xxxxxxxxxx/T/ Varadarajan Narayanan (5): dt-bindings: usb: dwc3: Add IPQ9574 compatible clk: qcom: gcc-ipq9574: Add USB related clocks arm64: dts: qcom: ipq9574: Add USB related nodes arm64: dts: qcom: ipq9574: Add LDO regulator node arm64: dts: qcom: ipq9574: Enable USB .../devicetree/bindings/usb/qcom,dwc3.yaml | 3 +- arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 30 ++++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 +++++++++++++++++++++ drivers/clk/qcom/gcc-ipq9574.c | 37 ++++++++ include/dt-bindings/clock/qcom,ipq9574-gcc.h | 2 + 5 files changed, 175 insertions(+), 1 deletion(-) -- 2.7.4
