Re: [PATCH RFC 1/7] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/06/2023 17:07, Neil Armstrong wrote:
On some platforms, the Type-C plug orientation is given on a GPIO line.

Document this optional Type-C connector property, and take the
assumption an active level represents an inverted/flipped orientation.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  Documentation/devicetree/bindings/connector/usb-connector.yaml | 5 +++++
  1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index ae515651fc6b..c3884eed6ba4 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -114,6 +114,11 @@ properties:
      description: Set this property if the Type-C connector has no power delivery support.
      type: boolean
+ orientation-gpios:
+    description: An input gpio for Type-C connector orientation, used to detect orientation
+      of the Type-C connector. GPIO active level means "CC2" or Reversed/Flipped orientation.
+    maxItems: 1

Should this be a property of the connector or of the parent device node? I mean, unlike usb-b-connector (where ID and Vbus can be simple GPIOs nearly directly connected to the pins of the connector) for the USB-C the orientation is not a connector's GPIO, but rather some additional not elementary logic.

+
    # The following are optional properties for "usb-c-connector" with power
    # delivery support.
    source-pdos:


--
With best wishes
Dmitry




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux