On 15.05.2023 15:36, Bryan O'Donoghue wrote:
> Type-C port management functionality lives inside of the PMIC block on
> pm8150b.
>
> The Type-C port management logic controls orientation detection, vbus/vconn
> sense and to send/receive Type-C Power Domain messages.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/pm8150b.dtsi | 40 +++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> index 66752cc063d60..136e5f96a3d53 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -59,6 +59,46 @@ pm8150b_vbus: usb-vbus-regulator@1100 {
> reg = <0x1100>;
> };
>
> + pm8150b_typec: typec@1500 {
> + compatible = "qcom,pm8150b-typec";
> + status = "disabled";
> + reg = <0x1500>,
> + <0x1700>;
> + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "or-rid-detect-change",
> + "vpd-detect",
> + "cc-state-change",
> + "vconn-oc",
> + "vbus-change",
> + "attach-detach",
> + "legacy-cable-detect",
> + "try-snk-src-detect",
> + "sig-tx",
> + "sig-rx",
> + "msg-tx",
> + "msg-rx",
> + "msg-tx-failed",
> + "msg-tx-discarded",
> + "msg-rx-discarded",
> + "fr-swap";
> + vdd-vbus-supply = <&pm8150b_vbus>;
> + };
> +
> pm8150b_temp: temp-alarm@2400 {
> compatible = "qcom,spmi-temp-alarm";
> reg = <0x2400>;
