[PATCH v4 36/41] usb: pci-quirks: handle HAS_IOPORT dependencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. In the pci-quirks case the I/O port acceses are
used in the quirks for several AMD south bridges. Move unrelated
ASMEDIA quirks out of the way and introduce an additional config option
for the AMD quirks that depends on HAS_IOPORT.

Co-developed-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
      per-subsystem patches may be applied independently

 drivers/usb/Kconfig           |  10 +++
 drivers/usb/core/hcd-pci.c    |   2 +
 drivers/usb/host/pci-quirks.c | 125 ++++++++++++++++++----------------
 drivers/usb/host/pci-quirks.h |  30 ++++++--
 4 files changed, 101 insertions(+), 66 deletions(-)

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7f33bcc315f2..765093112ed8 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -91,6 +91,16 @@ config USB_PCI
 	  If you have such a device you may say N here and PCI related code
 	  will not be built in the USB driver.
 
+config USB_PCI_AMD
+	bool "AMD PCI USB host support"
+	depends on HAS_IOPORT
+	default X86 || MACH_LOONGSON64 || PPC_PASEMI
+	help
+	  Enable workarounds for USB implementation quirks in SB600/SB700/SB800
+	  and later south bridge implementations. These are common on x86 PCs
+	  with AMD CPUs but rarely used elsewhere, with the exception of a few
+	  powerpc and mips desktop machines.
+
 if USB
 
 source "drivers/usb/core/Kconfig"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ab2f3737764e..85a0aeae85cd 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
 		goto free_irq_vectors;
 	}
 
+#ifdef CONFIG_USB_PCI_AMD
 	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
 			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif /* CONFIG_USB_PCI_AMD */
 
 	if (driver->flags & HCD_MEMORY) {
 		/* EHCI, OHCI */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9add..e0612f909fad 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
 #define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
 #define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
 
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
+#define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -93,21 +110,6 @@
 #define	NB_PIF0_PWRDOWN_0	0x01100012
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
-#define USB_INTEL_XUSB2PR      0xD0
-#define USB_INTEL_USB2PRM      0xD4
-#define USB_INTEL_USB3_PSSEN   0xD8
-#define USB_INTEL_USB3PRM      0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG	0xF8
-#define ASMT_DATA_WRITE1_REG	0xFC
-#define ASMT_CONTROL_REG	0xE0
-#define ASMT_CONTROL_WRITE_BIT	0x02
-#define ASMT_WRITEREG_CMD	0x10423
-#define ASMT_FLOWCTL_ADDR	0xFA30
-#define ASMT_FLOWCTL_DATA	0xBA
-#define ASMT_PSEUDO_DATA	0
-
 /*
  * amd_chipset_gen values represent AMD different chipset generations
  */
@@ -458,50 +460,6 @@ void usb_amd_quirk_pll_disable(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
 
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
-	unsigned long retry_count;
-	unsigned char value;
-
-	for (retry_count = 1000; retry_count > 0; --retry_count) {
-
-		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
-		if (value == 0xff) {
-			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
-			return -EIO;
-		}
-
-		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
-			return 0;
-
-		udelay(50);
-	}
-
-	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
-	return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send command and address to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send data to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
 void usb_amd_quirk_pll_enable(void)
 {
 	usb_amd_quirk_pll(0);
@@ -630,7 +588,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 	return !(value & BIT(port_shift));
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif /* CONFIG_USB_PCI_AMD */
 
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		udelay(50);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#if defined(CONFIG_HAS_IOPORT) && defined(CONFIG_USB_UHCI_HCD)
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
@@ -711,6 +715,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
 	return 1;
 }
 EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif /* defined(CONFIG_HAS_IOPORT && defined(CONFIG_USB_UHCI_HCD) */
 
 static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
 {
@@ -723,6 +728,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
 
 static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 {
+#ifdef CONFIG_HAS_IOPORT
 	unsigned long base = 0;
 	int i;
 
@@ -737,6 +743,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 
 	if (base)
 		uhci_check_and_reset_hc(pdev, base);
+#endif /* CONFIG_HAS_IOPORT */
 }
 
 static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..8c87505f0abc 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,9 +2,10 @@
 #ifndef __LINUX_USB_PCI_QUIRKS_H
 #define __LINUX_USB_PCI_QUIRKS_H
 
-#ifdef CONFIG_USB_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
+#ifdef CONFIG_USB_PCI_AMD
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
@@ -12,23 +13,38 @@ void usb_amd_dev_put(void);
 bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 void sb800_prefetch(struct device *dev, int on);
 bool usb_amd_pt_check_port(struct device *device, int port);
 #else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+	return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+	return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+	return false;
+}
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 static inline void sb800_prefetch(struct device *dev, int on) {}
 static inline bool usb_amd_pt_check_port(struct device *device, int port)
 {
 	return false;
 }
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
-- 
2.39.2




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux